|
| 1 | Supply & Erection of Galvanised steel lattice structure of height 12.8 mtr as per DISCOMs approved design & details in alignment, including painting of tower of approved make, all completed as per technical specifications & drawing of DISCOM. (Excavation of pit PCC and CC foundation as per Discom specs. to be Paid Extra). |
| 2 | SITC of Copper Bonded rod Earthing with high tensile strength (more than 600 N / sq.mm low carbon steel rod molecularly bonded with Copper thickness (250 microns) and confirming to UL 467 of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :- |
| 3 | (a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole |
| 4 | (b)Earth enhancing compound to ensure the moisture content and electrical conductivity, 25 kg for 3000 mm. The compound shall be tested form NABL accredited lab for low resistivity (less than 0.12 Ohm - meter) & high conductivity in nature with carbon as a major content in accordance with IEC 62561-7 |
| 5 | © Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt |
| 6 | (d) Place Heavy duty weather proof poly-propylene earth inspection chamber as per requirement of IS/IEC 62305 and tested as per IEC 62561-5 with lockable Jam free lid suitable for safe working load 60 kN of round / square size 250 mm, and Height 250 to 300 mm. |
| 7 | (e) Testing of earth resistance for value of 5 ohms or less as required. |
| 8 | (f) Test certificates for confirming above standards from OEM is mandatory. |
| 9 | 17.2 mm thick and 3 Mtr. Long |
| 10 | Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping double the width of strip and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. |
| 11 | 20mm x 3mm G.I. ( Hot Dipped ) Strip |
| 12 | Alluminium alloy Vertical Air termination 16/10 mm with base mounted on 5000 mm 56/40 mm GI pipe as mast |
| 13 | Supply and installation of an 8 mm aluminum down conductor, designed for efficient dissipation of lightning currents. The conductor shall be securely fixed using corrosion-resistant clamps at appropriate intervals, ensuring a continuous, low-resistance path from the air terminal to the earthing system. The conductor length shall be determined based on actual site conditions, with all necessary accessories, including clamps, connectors, and fasteners. |
| 14 | Hire charges for LED Flood light luminaire ( white or warm white as required )for 90- 150 watt with the standard housing ,pole & mounting accessories with wiring, connection with skilled operator to operate system etc. as and when required. |
| 15 | With suitable pole |
| 16 | for 1st day |
| 17 | For 2nd / 3rd day |
| 18 | from 4th Day onwards |
| 19 | Without suitable pole |
| 20 | for 1st day |
| 21 | For 2nd / 3rd day |
| 22 | from 4th Day onwards |
| 23 | Providing Manpower through Contracting agency for Supervision / Execution / Operation of various Electromechanical Installations. (one shift of 8 working Hrs per day ) on basis of minimum wages + VDA order Dt. 28.03.2025 Ministry of Labour and Employement Govt. of India |
| 24 | Technical Helper Having basic Knowledge of E&M Services |
| 25 | Hire charges for Silent type D.G. Set, including change over switch. Control panel, 2 No. Pipe earthing etc. and excluding POL with skilled operator to operate system as and when etc as required. of following capacity: |
| 26 | 62.5 KVA |
| 27 | for 1st day |
| 28 | From 2nd day onwards |
| 29 | 125 KVA |
| 30 | for 1st day |
| 31 | From 2nd day onwards |
| 32 | Hire charges of Main service line for 3 phase connection upto 50 mtr. Length (without any joint) including meter board, panel/distribution Board and supports with skilled operator to operate system as and when etc as required. |
| 33 | Upto 25.0 sq.mm size PVC insulated and Sheathed cable( Aluminium Armoured or Un-armoured as required.) |
| 34 | for 1st week |
| 35 | For 2nd / 3rd day |
| 36 | from 4th Day onwards |
| 37 | above 25.0 sq.mm & upto 95 Sq.mm PVC insulated and Sheathed cable aluminium Armoured or Un-armoured as required.) |
| 38 | for 1st week |
| 39 | For 2nd / 3rd day |
| 40 | from 4th Day onwards |
| 41 | Hire charges for pedestal fan of size 18\\" / ceiling fan of size 48\\"/56\\" sweep including connections etc.with skilled operator to operate system as and when etc as required. |
| 42 | for 1st day |
| 43 | For 2nd / 3rd day |
| 44 | from 4th Day onwards |
| 45 | Supply and filling of POL for DG sets |
| 46 | Hire charges for following type of Airconditioners including copper piping , drain piping and electrical connections with skilled operator to operate system as and when etc as required. |
| 47 | 3.0 /4.0 TR Tower type split AC |
| 48 | for 1st day |
| 49 | 2nd day onwards |
| 50 | Hire charges for Floor cable protector for laying Temporary cable during events made out from LPDE/PU , Each protector should be with an anti-slip textured top surface for maximum grip, should be easily linked together to create required length of following sizes. |
| 51 | Width 135 - 200 mm x Height 25 mm (or above) |
| 52 | for 1st day |
| 53 | For 2nd / 3rd day |
| 54 | from 4th Day onwards Please Enable Macros to View BoQ information |
