|
| 1 | Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes complete all as specified and as directed. |
| 2 | Taking down sheet metal enclosure DB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed. |
| 3 | Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed. |
| 4 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete including dummy switches wherever required all as specified and making good disturbed surfaces applying putty /distemper/white washing etc for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 5 | All as per Item No. 4 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed. |
| 6 | All as per Item No. 4 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed. |
| 7 | All as per Item No. 4 above but One 3 pin 5 amps socket out let point on independent board and wiring with 1.5 sqmm multistranded copper wire and earth wire of 1.5 sqmm multistranded copper wire complete all as specified and as directed.Note : There shall be separate circuit for independent board |
| 8 | All as per Item No. 4 above but One bell/buzzer point controlled by one bell push complete all as specified and as directed. |
| 9 | All as per Item No. 4 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and as directed. |
| 10 | All as per Item No. 4 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and as directed. |
| 11 | All as per Item No. 4 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and as directed. |
| 12 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit/ PVC Casing and Caping not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm, PVC modular boxes on wall/ iron structure for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete including dummy switches wherever required all as specified and making good disturbed surfaces applying putty /distemper/white washing etc for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 13 | All as per Item No. 12 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed. |
| 14 | All as per Item No. 12 above but One 3 pin 5 amp socket out point on the same board with other switches complete all as specified and as directed. |
| 15 | All as per Item No. 12 above but One 3 pin 5 amps socket out let point on independent board and wiring with 1.5 sqmm multistranded copper wire and earth wire of 1.5 sqmm multistranded copper wire complete all as specified and as directed.Note : There shall be separate circuit for independent board |
| 16 | All as per Item No. 12 above but One bell/buzzer point controlled by one bell push complete all as specified and as directed. |
| 17 | All as per Item No. 12 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and as directed. |
| 18 | All as per Item No. 12 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and as directed. |
| 19 | All as per Item No. 12 above but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and as directed. |
| 20 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed/Surface in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. |
| 21 | As per item No 20 above but 2 x 1.50 Sqmm with earth wire of 1 x 1.5 Sqmm complete all as specified and as directed. |
| 22 | As per item No 20 above but 2 x 4.0 Sqmm with earth wire of 1 x 4.0 Sqmm complete all as specified and as directed. |
| 23 | As per item No 20 above but 2 x 6.0 Sqmm with earth wire of 1 x 6.0 Sqmm complete all as specified and as directed. |
| 24 | As per item No 20 above but 4 x 6.0 Sqmm with earth wire of 1 x 6.0 Sqmm complete all as specified and as directed. |
| 25 | Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and as directed. |
| 26 | S&F Bell ding dong, AC 230 volts, single phase complete all as specified and as directed. |
| 27 | Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and as directed. |
| 28 | Supply and fix Modular switch one way 6A, 1 module complete all as specified and as directed. |
| 29 | Supply and fix Modular switch one way 16A, 1 module complete all as specified and directed |
| 30 | Supply and fix Modular bell push 6A, 1 module complete all as specified and directed |
| 31 | Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and directed |
| 32 | Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed |
| 33 | Supply & Fix Modular switch 2 way 6A, 1 module complete all as specified and as directed. |
| 34 | Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specified and directed |
| 35 | Supply & Fix modular motor starter 25A , 2 module for AC complete all as specified and directed. |
| 36 | Supply and fix flush piano type switch one way 6A, 1 phase complete all as specified and directed |
| 37 | Supply and fix flush piano type switch one way 16A, 1 phase complete all as specified and directed |
| 38 | Supply and fix flush type socket one way 6A, 1 phase complete all as specified and directed |
| 39 | Supply and fix flush type socket one way 16A, 1 phase complete all as specified and directed |
| 40 | Supply and fix flush type switch socket combination 3 pin one way 6A, 1 phase complete all as specified and directed |
| 41 | Supply and fix flush typeswitch socket combination 3 pin one way 16A, 1 phase complete all as specified and directed |
| 42 | S & F stepped type electronic fan regulator flush type (switch/socket type) on the existing phenolic laminated sheet etc. complete all as specified |
| 43 | Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed |
| 44 | Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and as directed. |
| 45 | Supply & fix fittings with recess/surface mount LED down lighters 12 W round/square including driver with rated voltage 240 V , 50 Hz, coolday white/warm white complete all as specified and as directed. |
| 46 | Supply & fix fittings with recess/surface mount LED down lighters 15 W round/square including driver with rated voltage 240 V , 50 Hz, coolday white/warm white complete all as specified and as directed. |
| 47 | Supply and fix Energy efficient recess/surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz white /warm white combination with profiled and flat diffuse complete all as specified and as directed. |
| 48 | Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and as directed. |
| 49 | Supply and fix building security light LED 35 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and as directed. |
| 50 | S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed. Note :- Fittings and driver should be of same make |
| 51 | S & F 20 watt 4 ft LED batten with in built sensor based smart made from powder coated extruded aluminium housing, opaque glare free diffuser prewired with all accessories. Dimming from 100 % of rated voltage to 30 % on sensing of movement/occupancy complete all as specified and directed. |
| 52 | S & F smart colour temperature, CCT controllable 2 x2 LED 36/40 W lighting with remote control with dimming and CCT change option from 2700K to 6500K. Housing made from powder coated cast aluminium, opaque diffuser glare free complete all as specified and directed. |
| 53 | Supply and fix COB (chip on board) 9W LED recessed mounted warm white suitable for 240V, 50 Hz complete all as specified and directed. |
| 54 | S&F wall decorative lamp with frosted glass chrome finish 2 X 7W suitable for 230 V AC, 50 Hz complete all as specified and directed. |
| 55 | S&F LED globe post top gate light made from engineering grade polymer, supplied along with B22 LED bulb IP 65 protection 15 W comlete all as specified and directed |
| 56 | S&F LED Under water swimming pool lights 12W, 3500-5700KK, Warm White, with driver 250V 50 Hz 2.5 amp fixed to tiles complete with sealing agent and connected all as specified and direceted. |
| 57 | S&F LED Bed lamps 3W chrome finish wall mounted 230V AC, 50Hz complete all as specified and as directed. |
| 58 | S&F Ground Burial Light 5W warm white suitable for 230 V AC, 50Hz complete all as specified and as directed |
| 59 | Supply and fix rechargeable emergency inverter bulb 9W cool day light 100 lumens/watt 240 V , 50 Hz operable and min 50 lm/watt in power backup mode with min 4 hrs backup when full charged complete all as specified and directed |
| 60 | S&F decorative pole light with pole and light both 30W light min 2.5 mtr height complete all as specified and directed. |
| 61 | S&F in replacement Antique decorative pole light with holder and lamp with height min 2.5 mtr and base diameter 800 mm with antique finish complete all as specified and directed. |
| 62 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type 3000-6500k CCTwith thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 63 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type 3000-6500k CCT with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 64 | S&F RGB fountain light LED outdoor type 12 watt min IP 67 protection including driver suitable for 240 V 50 Hz complete all as specified and directed. |
| 65 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type white/warm white with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 66 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type white/warm white with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 67 | Supply and fixing bollard type LED type, 10 watt, 300lumens, white/warm white, 230 volts AC outdoor type with decorative bollard light IP 65/66 , Ik10 impact protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 68 | Material and labour for wiring with unarmoured copper cable of size 2 core x 1.5 Sqmm from junction box to light fitting all as specified and as directed. |
| 69 | Supply and lay GI tubing 50 mm dia, light grade for cable protection at road crossing / on poles and for stand post to hold Post Top lantern complete all as specified and as directed. |
| 70 | Supply and fixing of PVC Junction box of size 140 x 140 x 95 mm, light weight pole mounting hinged type including 1No. of MCB SP 6A necessary clamp for MCB mounting and mounting of Box on pole/pipe with MS flat frame arrangement and necessary connector for looping in and looping out cable connection and suitable glands complete all as specified and as directed. (For Post Top Lantern & Bollard Lights) |
| 71 | Supply and laying PCC(1:2:4) 20mm graded aggregate type B of PCC for foundation of poles/GI Pipe complete all as specified and as directed |
| 72 | Supply,testing, laying & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 volts grade, 4 core 6 sqmm laid in trenches / duct/ fixed to wall with suitable size clamps / passing through pipe/Tunnel/under ground/surface up to the termination point(as directed by Engr-in-Charge) and cable end terminations crimped with suitable size cable lugs, cable glands with tool,nuts,bolts etc and connecting end terminations to DBs/LT panel/Busbar etc complete all as specified and as directed. |
| 73 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as specified and as directed. |
| 74 | Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as specified and as directed. |
| 75 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 76 | S&F of HDPE double wall corrugated pipe confirming to IS -14930 Part with IP protection IP-67 having Outer dia 50 mm complete terminated up to termination end point complete all as specified and as directed. |
| 77 | M & L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling for laying of cable pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed. |
| 78 | M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with the following items complete all as specified and directed for modular metal flush box with modular cover plate with frame 3 module complete all as specified and as directed.Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately. |
| 79 | All as per item no 78 but Modular metal flush box with modular cover plate with frame 4 module complete all as specified and as directed. |
| 80 | All as per item no 78 but Modular metal flush box with modular cover plate with frame 6 module complete all as specified and as directed. |
| 81 | All as per item no 78 but Modular metal flush box with modular cover plate with frame 8 module complete all as specified and as directed. |
| 82 | All as per item no 78 but Modular metal flush box with modular cover plate with frame 12 module complete all as specified and as directed. |
| 83 | All as per item no 78 but Modular metal flush box with modular cover plate with frame 2 module complete all as specified and as directed. |
| 84 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required, complete all as specified and as directed. |
| 85 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required. complete all as specified and as directed. |
| 86 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required . complete all as specified and as directed. |
| 87 | Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including dummy plates wherever required complete all as specified and as directed. |
| 88 | Supply and fix sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 100 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and as directed. |
| 89 | Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA breaking capacity, 'C' series complete all as specified and as directed. |
| 90 | Supply and fix MCB single pole and neutral 240 volt32 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed. |
| 91 | Supply and fix MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and as directed. |
| 92 | Supply and fix MCB triple pole 415 volt 32 amps 10 KA complete all as specified and as directed. |
| 93 | Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. |
| 94 | M & L for Rigid non-metallic PVC conduit 25 mm exclusive of boxes concealed in wall/ceiling or on surface (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down existing TV/LAN/camera cable and drawing the same in conduit (including taking down the old conduit & accessories) etccomplete all as specified and as directed. |
| 95 | M&L for Rigid non-metallic PVC conduit 32 mm exclusive of boxes concealed in wall/ceiling or on surface (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down existing TV/LAN/camera cable and drawing the same in conduit( including taking down) etc complete all as specified and as directed. |
| 96 | S&F casing and caping after taking down for drawing wire on wall/ceiling etc all as directed min 25 mm width including taking down old wire any type and refixing the same in casing caping complete all as specified and as directed. |
| 97 | Supply and fix LED driver suitable for 8W to 36 W as per site for 2' x 2' , downlighter, bollard light, post top light etc with overvoltage and short circuit protection complete all as psecified and directed |
| 98 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 53,337.00] Please Enable Macros to View BoQ information |
