|
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 3 | M&L 15mm thick cement plaster in Cement mortar 1:4 on brick or concrete surfaces of wall finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L 10mm thick cement plastering in cement mortar CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | Supplying and applying for two component elestomeric acrylic polimer modified cementitious water proofing coating on brick wall SmartCare Damp Block 2k or approved eqivalent having 1005 elengotation as per ASTMD412 , resisting 5 bars hydrostatic pressure as per DIN 1048 reduction to rapid chloried 70 as per ASTMC 1202 ,crack bridging up to 1.2 mmas per ASTM 4548.5 The Coating shall havefood grade Certificate from laboratories like CFTRI, will be applyon both Positive & Negative side and resist upto 5 Bars of Hydrostic pressure .The mixing ratio of coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing etc .After coating will sprinkle sand on the coating then theh apply plaster on the coating which is in contractor scope complete all as manu facture specification. |
| 6 | M&L Preparation of new plastered or unplastered surfaces of walls, applying three coats of white wash complete all as specified and directed. |
| 7 | M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed. |
| 8 | Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed. |
| 9 | M&L Preparation of old plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed. |
| 10 | M&L Preparation of old plastered or unplastered surfaces of walls, applying two coats of white wash complete all as specified and directed. |
| 11 | Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed. |
| 12 | Brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed (as in manhole) |
| 13 | M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan to any raidus but in half thick brick walls, complete all as specified and directed. |
| 14 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 15 | All as per srl item no 14 hereinbefore but n. exc 1.5 sqm each, complete all as specified and directed. |
| 16 | S&F Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, complete as specified,size 105x 60mm complete all as specified and directed.( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish. |
| 17 | S&F Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate,complete as specified,size 125x 60mm complete all as specified and directed.( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item ) |
| 18 | M&L Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed. |
| 19 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 20 | S&F 35mm 2nd class hard wood Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. |
| 21 | S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and complete all as specified and directed. |
| 22 | S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed, complete all as specified and directed. |
| 23 | S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size, complete all as specified and directed. |
| 24 | S&F Mild steel butt hinges of size 100mm medium weight cold rolled, complete all as specified and directed. |
| 25 | S&F Mild steel butt hinges of size 75mm medium weight cold rolled, complete all as specified and directed. |
| 26 | S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed in floor overall length of cover plate 140mm, complete all as specified and directed. |
| 27 | S&F 300 mm long MS rat tail pattern spring hinge (helical door spring) including roller and roller plate, complete all as specified and directed. |
| 28 | Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete all as specified and directed including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.(d) Note:- For Cooler fixing arrangement 08 nos shutter Each window. |
| 29 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 30 | Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed and complete all as specified and directed. |
| 31 | S&F Wire netting of galvanised steel wire 1.40mm dia and size of mesh 25mm fixed with wooden beds tinned tacks of wire staples, complete all as specified and directed. |
| 32 | M&L Preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint and one coat of pink primer complete all as specified and directed. |
| 33 | M&L Preparing of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | M&L Preparing of old steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 35 | Taking up or down steel tubing of size15mm bore and removal to store, complete all as specified and directed. |
| 36 | Taking up or down steel tubing of size 20mm bore and removal to store, complete all as specified and directed. |
| 37 | Supply & laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed. |
| 38 | Supply & laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with and incl fittings fixed on walls/ceiling or laying in floors complete all as specified and directed. |
| 39 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed. |
| 40 | Dismanteling 1000ltr water storage tank, complete all as specified and directed. |
| 41 | Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1, complete all as specified and directed. |
| 42 | S&F in repair Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 43 | Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises, complete all as specified and directed. |
| 44 | M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed. |
| 45 | M&L for glazed ceramic coloured tiles of size 450X 300X 7mm thick thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 46 | M&L for Machine cut Kota stone slab flooring 20 - 25mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 47 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15cm thickness (Below or above ground level), complete all as specified and directed. |
| 48 | M&L 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregates in complete all as specified and directed. |
| 49 | M&L for Pre polished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed. |
| 50 | S&F 18 mm thick 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 51 | S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 52 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg, complete all as specified and directed. |
| 53 | S&F Paino/continuous hinge of size 30 mm stainless steel complete all as specified and directed. |
| 54 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacture's instructions and complete all as specified and directed. |
| 55 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed. |
| 56 | M&L Clean Sawn Timber framed and fixed in Second class Soft wood Scantlings as in Wall/Ceiling and complete all as specified and directed. |
| 57 | M&L 2nd class softwood not exc 3 Sq cm Plain Fillets, square, Rectangular or traingular in sec ,clean swan ,Secured with nails or brads and complete all as specified and directed. |
| 58 | PVC ( SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iror clamps 25x3mm complete all as specified including taking out old damaged AC rain water pipes, complete all as specified and directed. |
| 59 | PVC (SWR) bends of any radius for 110 mmdia rain water pipes with rubber ring joints a complete all as specified and directed. |
| 60 | S & F PVC P & S Trap with grating including jointing to waste pipe 110mm dia fixed complete all as specified and directed. |
| 61 | M&L Granite 20mm thick (of Z Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing complete laid over and including 15mm thick screed bed or bedding layer in CM(1:4), complete all as specified and directed. |
| 62 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 63 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 64 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring, complete all as specified and directed. |
| 65 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 66 | S&F MS hollow rectangular/square/circular tubes/pipes of Fe410-W(Gde-E-250) Grade as in frame work for roof/rafter/purline/chajja/trusses/columns/struts etc and like similar items etc, complete all as specified and directed. |
| 67 | Dismantling of asbestos cement sheets [corrugated, semi-corrugated, etc] in roof coverings complete all as specified and directed. |
| 68 | S & F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws complete all as specified and directed. |
| 69 | M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed. |
| 70 | M&L Preparation of old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed. |
| 71 | M&L for Vitrified ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile n.exc 0.38 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 15mm thick screed beeding in CM 1:6 complete all as specifed and directed. |
| 72 | Supply & laying of 15 mm bore GI water tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 73 | Supply & laying of 20 mm bore GI water tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 74 | S & F 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 75 | Dismantling of wall and ceiling board any thickness including cover fillets complete all as specified and directed. |
| 76 | S&F for frame work only for suspended false ceiling, GI exposed ceiling suspension system of grid size 600mm x 600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm. to form a grid of GI system duly suspended with 4mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc all as specified and as directed. |
| 77 | S&F for false ceiling of pre painted high pressure steam cured designer boards of size 595 mm x 595 mm x 4 mm thick fixed on GI snap grid, complete all as specified and as directed. |
| 78 | Hard core of broken bricks of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 79 | M&L PCC (1:3:6) type C-1 (using 20 mm graded aggregate) as in PCC path/ plinth protection 50mm thick. finished the surfaces even and smooth with out using extra cement complete all as specified and directed. |
| 80 | S&f Coolar stand Joist, channel, angle, or tee sections, fixed independently, without connecting plates, conforming to Fe 410-W (Gde-E-250) quality -A, complete all as specified and directed. |
| 81 | S&F in repair Stainles steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc complete all as specified and directed.Note: For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 82 | Taking down carefully copper/ aluminium point wiring (light,fan, socket or power) complete along with fittings such as switches, ceiling roses, regulators and other Kits & fittings/conduit from surface /wall. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed. |
| 83 | M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed for the following:- |
| 84 | (a) One light/fan point controlled by one 1-way switch, complete all as specified and directed. |
| 85 | (b) One 3/5 pin socket outlet, 5 Amp on independent board, complete all as specified and directed. |
| 86 | (c) One 3/5 pin socket outlet, 5 Amp on same board, complete all as specified and directed. |
| 87 | M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed. |
| 88 | Dismantling / Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location., complete all as specified and directed. |
| 89 | M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core through concealed rigid nonmetallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall complete all as specified and directed.(Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length) |
| 90 | S&F Switch Modular type, 6 Amp, 240 Volts , one way complete fixed complete all as specified and directed. |
| 91 | S&F Switch Modular type, 16 Amp,240 Volts , one way complete fixed as in repair complete all as specified and directed. |
| 92 | S&F Socket outlet, Modular type, 6 Amp complete fixed as in repair complete all as specified and directed. |
| 93 | S&F Socket outlet, Modular type, 6&16 Amp complete fixed as in repair complete all as specified and directed. |
| 94 | S&F Fan regulator, modular type electronic step type complete fixed as in complete all as specified and directed. |
| 95 | S&F in replacement of Modular ceiling rose surface type complete all specified and as directed. |
| 96 | S&F in replacement of LED lights fitting 1x20 Watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 97 | Supply & fix LED bulk head ,10 W complete all as specified & directed. |
| 98 | Supply & fix in replacement of Lamp holder modular type, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts complete all as specified and directed. |
| 99 | Supply & fixing LED inverter Bulb 9 Watt (CDL) cool day light, LED Inverter Bulb Cool Daylight, complete all as specified and directed. |
| 100 | M&L for taking down ceiling fan of any descrptions, servicing, rewinding, and complete repairs, painting of fan as required, fixing back or fixing new ceiling fan for proper functioning, Including connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed. |
| 101 | Supply and fix in replacement of exhaust fan, steel body AC single phase , 230 V of size 450 mm sweep heavy duty with copper winding incl grouting and making good the disturbed surface shall be part of job at no extra cost, complete all as specified and directed.(Note:-Unsv E/Fan will be deposted to MES office). |
| 102 | Supply and fix louver for exhaust fan of size 450 mm sweep grouting and making good the disturbed surface all as specified and directed. |
| 103 | S&F in replacement of Geyser (water heater) vertical storage type 240 volts, 2000 Watt, water proof IPX-4 protection having adjustable knob for temperature settings, copper cell of 25 Ltr capacity, 5 star rating with all accessories such as safety valve, thermostate, NRV, connection piece etc. and incl cost of anchoring arrangement (nut & bolts) to the wall, corded copper electric cable etc., incl dismantling of existing geyser complete all as specified and directed.(Note:-Unsv Geysers will be deposted to MES office. ) |
| 104 | S&F in replacement of MCB DB SPN 8 Way with acrylic double door complete all as specified and directed. |
| 105 | S&F in replacement of VTPN DB including flushing in wall MCB distribution board Vertical TPN 4 way, 415 Volts AC, double door type, sheet steel phosphotised powder painted with bus bar neutral earth bar including provision of MCB TPN, FP 100 Amp conforming to IP 43 as incomer all as complete specified and directed. |
| 106 | S&F MCCB 4 pole 100 Amp 415 volt with breaking capacity of 16 KA complete all as specified and direceted. |
| 107 | S&F MCB SPN 240V 40 Amps C series 10 KA complete all as specified and direceted. |
| 108 | S&F MCB SP 240V 6 to 32 Amps C series 10 KA complete all as specified and direceted. |
| 109 | Taking down old U/S LT UG cable of any size from trenches/pipe/floor/walls complete all as specified and directed. |
| 110 | Supply, laying and jointing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt, 3.5 core, 35 Sqmm cross sectional area, laid in trenches/wall/ducts/pipes, including all necessary fixing arrangements such as cable lugs and glands etc., complete in all respects after removal of existing unsv cable, complete all as specified and directed. |
| 111 | M&L for providing trenchless road/pavements/hardstanding crossing by horizontal boring for laying GI pipe up to 80 mm dia for LT cable, without damaging road surface, including supply of GI pipe, back filling & restoration of pits/surfaces to match existing road/surface, rate inclusive of all labour, T&P, materials, complete all as specified and directed. |
| 112 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in any type of soil complete all as specified and directed. |
| 113 | Returning filling in including ,spreading,levelling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed. |
| 114 | Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed |
| 115 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and directed. |
| 116 | Supplying & laying factory made unreinforced Pre cast concrete cable covers, class LV, type 1 flat of size 250 x 150 x 40mm laid in trenches as protection to cables all as specified and as directed. |
| 117 | S&F GI pipe of size 50 mm dia in wall, ground & on pole complete all as specifed & directed. |
| 118 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40x40x6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. complete all as specified & directed. |
| 119 | S & F in replacement of Energy saving ceiling fans complete with blades, down rod and with all accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM not less than three star rated with brushless direct current motor (BLDC) with remote control complete all as specified & directed. (Note:-Unsv C/Fan will be deposted to MES office). |
| 120 | Supply and fixing warm white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed. Please Enable Macros to View BoQ information |
