|
| 1 | PA system |
| 2 | OD9502/2026-2027:Supply and installation of 21 inch Gooseneck Microphone having minimum specification: 1) Capsule type: electret condenser, 2) Polar Pattern: Cardioid, 3) FR: 20-20000 Hz, 4) Power: 11-52V DC Phantom Power, 5) Sensitivity: -40 dB, 6) Impedance: 280 ohm, 7) Anti-Mobile RF Interference Technology, 8) microphone base with ON/OFF switch and LED. Preferred Make: Studiomaster Flex 4 or equivalent |
| 3 | OD63977/2025-2026:Supply and installation of Dual channel Wireless Microphone system with Dual Channel Non-Diversity receiver, one handheld and one lapel microphones, FR: 50-16000 Hz, Individual Channel XLR output and 1/4 inch Mix output, Display on Transmitter and Receiver for frequency indication. Etc. supplied with all necessary accessories including power adaptor and batteries for handheld and lapel mic. Preferred Make: Studiomaster XR 40 HL or equivalent |
| 4 | OD59353/2025-2026:Supply and installation of 12-Channel Analog Audio Mixer with USB Connection, 3-band EQ, 48V phantom power switchable, minimum 3 XLR inputs, FX send control per channel, Mono Line Inputs, Stereo Line inputs, STREAM Inputs, Main, Monitor and FX Send Outputs, Phones Out, etc. supplied with all necessary accessories. Preferred Make: Behringer XENYX 1202SFX or equivalent |
| 5 | OD9667/2026-2027:Supply and Installation, testing and commissioning of Commercial series Power Amplifier with minimum specification: Rated Power into 4 ohm or 8 ohm; 1kHz, 0.5% THD - 300W, Insertion Loss (70V and 100V outputs) - 1 dB maximum, Input Sensitivity at 8 ohm Load: Balanced line input: 775mV; RCA Mono Sum input: 300mV, FR: 20 Hz - 20 kHz, SNR: 97dB or better, Tone Controls: Bass +/-12dB @100Hz, Treble +/-12dB @10kHz; Preferred Make: JBL CSA 2300Z or equivalent |
| 6 | OD9504/2026-2027:Supply and Installation, testing and commissioning of Slim Column Loudspeaker with minimum specification: Two 5 x 2.25 inch racetrack woofers and one 1 inch tweeter, 24 inch tall with shallow 3.7 inch cabinet depth, Wide 160 deg horizontal and focused 110 deg vertical coverage, 10 deg downward tilt to aim for covering most listening areas without requiring physical down-tilting of the cabinet, 80W continuous pink noise power handling (320 W peak), FR: 70 Hz to 20 kHz, Built-in 20W 70V/100V multi tap transformer, 8 ohm direct input, 111 dB peak SPL (105 dBcontinuous), Tweeter near top of column for unobstructed coverage of listening space, including versatile mounting brackets and all necessary accessories. Preferred Make: JBL COL600 or equivalent |
| 7 | OD64106/2025-2026:Supply and Installation of Custom-Made Wooden Audio rack with 40 inch x 24-inch x 20 inch (H x W x D) size and enough racks for placing amplifier and mixer and ACDB including all other accessories |
| 8 | Cabling |
| 9 | OD10594/2026-2027:Supply and Installation of 24 AWG 19/0.120mm Annealed bare copper XLR cable with polyethylene insulation and soft PVC outer jacket through the existing conduit. Preferred make: Belden, MX, Falcon, Krystal |
| 10 | OD10749/2026-2027:Supply and installation of XLR/ Phono 3/Euro Block 3 three pole male/female connector with Nickel housing and silver contacts. Preferred Make: Neutrik, MX |
| 11 | OD10595/2026-2027:Supplying and drawing following sizes of PVC insulated, transparent, multi wire, bright annealed flexible bare electrolytic grade Cu conductor, twin speaker cable in the existing surface/ recessed steel/ PVC conduit as required. 1.5 sq.mm. Preferred Make: Havells, Polycab, Finolex |
| 12 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm Please Enable Macros to View BoQ information |
