|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 2 | M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 3 | M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm. as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 4 | M&L for glazed ceramic coloured tiles of size 350x250x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 6 | M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in skirting/dado, steps, pillars, window sills, cooking platform laid over 20mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including rounding edges of granite slab after dismantling of old unserviceable/ broken slab as directed by Engineer-in-Charge as required at site complete all as specified and directed. |
| 7 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 8 | M&L for Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 9 | M&L for brick work using fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 10 | M & L for 100 mm brass mortice lock two lever, vertical type fixed in door complete as in repair all as specified and directed. |
| 11 | M & L for 65 mm brass mortice lock two lever, vertical type fixed in door complete as in repair all as specified and directed. |
| 12 | S&F for door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body complete as in repair all as specified and directed. |
| 13 | M&L for double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking down shutter and refixing the same complete as in repair all as specified and directed. |
| 14 | S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks, or stainless steel wire staples as in repair complete all as specified and directed. |
| 15 | S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty and steel pins or wooden beads in squares not exceeding 0.50 square metre in each pane, after hacking out old broken glass of any type and size from any position upto height of 3 strory building complete all as specified and directed. |
| 16 | S&F for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, after hacking out old broken glass of any type and size from any position upto height of 3 strory building complete all as specified and directed. |
| 17 | S&F for 4.8mm thick tined glass, any colour in squares n exc 0.5 Sqm after hacking out old broken glass of any type and size from any position complete all as specified and directed. |
| 18 | S&F for aluminium beading inculing gasket etc (fixing in existing aluminium door shutter) complete as in repairs all as specified and directed. |
| 19 | S & F for 150 mm length floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor complete as in repair all as specified and directed. |
| 20 | Repair to exisiting steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable condition complete all as specified and directed.(Note: Rates for all necessary requirement for this repair work are inclusive in this item) |
| 21 | S&F for 15mm bore fancy type chromium plated stop valves, cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule and fixed complete as in repair all as specified and directed. |
| 22 | S&F for 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated screwed down or high pressure with or without lettered hot or cold with long screwed shank and fly nuts for iron pipe fixed complete as in repair all as specified and directed. |
| 23 | M&L for 15mm dia bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed. |
| 24 | S&F for 15mm bore fancy type chromium plated basin mixer hot and cold water screwed for wash basin, cast copper alloy with crutch or butterfly handle screwed for PVC Connection pipe or for brass ferrule and fixed complete as in repair all as specified and directed. |
| 25 | S&F for Brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union complete as in repair all as specified and directed. |
| 26 | S&F for brass chromium plated wall mixer , 3 in 1 for system with provision for both Hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete as in repair all as specified and directed. |
| 27 | S&F for PVC connection 15 mm dia with PTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete as in repair all as specified and directed. |
| 28 | S&F for Brass chromium plated tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange aluminium anodised complete as in repair all as specifed and directed. |
| 29 | S&F for vitreous China wash basin, white, flat back, size 550 x 400mm including one pair mild steel bracket complete as in repair all as specified and directed. |
| 30 | S&F for 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete as in repair all as specified and directed. |
| 31 | S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete as in repair all as specified and as directed. |
| 32 | S&F fo 8mm dia, 1.5 m long flexible tube with wall hook CP brass health faucent (hand shower) fixed to angle valve with back flow preventer complete as in repair all as speicified and directed. |
| 33 | S&F for plastic water closet seat, white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as in repair all as specified and directed. |
| 34 | S&F for soap dish fixed with including chromium plated brass screws and wooden plastic cleats complete as in repair all as specified and directed. |
| 35 | S&F for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as in repair all as specified and as directed. |
| 36 | S&F for vitreous China water closet Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests with loose cast iron or vitreous china earthenware, 'P' or 'S' trap, connecting pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed. |
| 37 | S&F for vitreous China water closet pan (squatt pan) pedestal pattern white with 'P' or 'S' trap including fixing seat and cover for pedestal pan, providing and fixing PVC valveless, syphonic action type, flusing cistern, low level, white, with inlet, ball valve, float and handle including brackets, brackets, chain and pull or lever handle, flushing piep of steel tube or polyethylene inclduing jointing to socket of flushing rim (with and including India rubber cone joint, if flushing rim connection is nozzle pattern) and connectiong pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed. |
| 38 | S & F for 32mm dia PVC waste pipe fixed to WHB/ sinks complete as in repairs all as specified and directed. |
| 39 | M&L for 40mm bore brass chromium plated waste coupling fitting for kitchen sink/WHB any type fixed complete as in repair all as specified and directed. |
| 40 | S&F for glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60 cm long complete as in repair all as specified and directed. |
| 41 | S&F for 125mm dia gratings with/without waste hole, fixed complete as in repairs all as specified and directed. |
| 42 | S&F for Rotational moulded polythylene water storage tank (ISI marked of multi layer) with float valve, plastic lid cover, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed complete all as specifed and directed. |
| 43 | S&F for Rotational moulded polythylene water storage tank (ISI marked of multi layer) with float valve, plastic lid cover, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 15mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed complete all as specifed and directed. |
| 44 | S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete (Minimum weight - 210 gms) all as specified and directed. |
| 45 | S&F for 15 mm bore galvanized iron GI tubing (medium grade) with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete after taking down old unserveciable 15mm dia GI pipe with fittings all as specified and directed. |
| 46 | S&F for 20 mm bore galvanized iron GI tubing (medium grade) with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete after taking down old unserveciable 20mm dia GI pipe with fittings all as specified and directed. |
| 47 | Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ wash basin of the upper Qtr, in any position at any height upto 3 story building, complete including change of floor trap, PVC horizontal pipe embeded in floor in bathroom or kitchen making good to the damage portion of flooring, laying and matching with new tiles in the existing flooring complete all as specified and as directed by Engineer-in-Charge.Note:-(a) Find out main cause of leakage and take necessary steps to resolve/rectify.(b) Replace existing tiles with new tiles in case lakage through NT/FT.(c) The rate also include provision of new NT/FT.(d) The unit rate is also deemed to be included for reqd bonding chemcidcalls to arrest the leakage/seepage as direct by the manufacturer specification. |
| 48 | S&F for aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom nylon brush and provision of counter sunk holes for screws etc. included complete as in repair all as specified and directed. |
| 49 | Taking down PVC/CI pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 50 | S & F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 51 | S & F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 52 | S&F for 110mm bore PVC SWR bends with access door complete all as specified and directed. |
| 53 | S&F for 110mm bore PVC SWR vent cowl with access door complete all as specified and directed. |
| 54 | S&F for 75mm bore PVC SWR bends with access door complete all as specified and directed. |
| 55 | S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete (1:3:6) type C1, using 20mm stone aggregate and connecting to waste pipe complete as in repair all as specifed and directed.(Note: cost of cement concrete work included in this item.) |
| 56 | Taking down Shutters of any description exc 1 sqm and n.exc 2.0 sqm for each leaf and refixing in same opening after cutting, adjusting and easing all as specified and directed |
| 57 | M&L for plain cement concrete type B-1 (1:2:4), (using 20 mm graded stone aggregates) as in mass concrete after demolition of cement concrete complete all as specified and directed. |
| 58 | M&L for 75mm thick PCC type C-2 (1:3:6), (using 40 mm graded stone aggregates) as in sub base of floor etc. and finshed the surface even and smooth without using extra cement after demolition of existing cement concrete complete all as specified and directed. |
| 59 | M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface, as in ceiling and finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed. |
| 61 | M&L for vitrified tiles dark shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.42 Sqm but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 62 | Disconnecting the existing PVC tanks of capacity exc 250 Ltr but not exc 500 Ltr. of any description, setting aside (or lowering if required) for repairs, dewatering, cleaning with wire/brush/jude/ cloths, removing all dirt and scale and algae formation inside the tank by using Terbac G5 or Terbac G65 ( a professional-grade bacteriological treatmemt and chemical used for water tank sterilization and cleaning ) with the help of cleaing mechine/ manually etc. including writing with white paint over the tank as \\"\\"TANK CLEANED ON\\"\\" with date, month and year with a minimum of 8 cm height in capital letters/ numbers and hoisting if required, reconnecting & refixing in position complete all as directed by Engineer-in- Charge. Note:- (i) Cost of labours and all material requried for cleaning the tank are inclusive in this item.(ii) Cleaning the tank thoroughly with fresh water by using high speed jet pump.(iii) Screening of bacteria to be done by using halogen compound of Terbac G5 or Terbac G65.(iv) Next screening of suspended bacteria by sterilizing method using ultravalent ray.(v) PV and TC of Terbac G5 or Terbac G65 shall be submited by the contractor before any of payment claim. |
| 63 | All as per srl item No 62 above but capacity exc 500 ltr & n exc 1000 Ltr complete all specified and directed. |
| 64 | M&L for 75mm thick PCC type C-2 (1:3:6), (using 40 mm graded stone aggregates) as in plinth protection, hard standing etc. and finshed the surface even and smooth without using extra cement after demolition of existing cement concrete complete all as specified and directed. |
| 65 | M&L for preparation of new wall surfaces and applying two or more coats of 100% premium quality acrylic emulsion paint (Apex ultima) having VOC less than 50gm/ Ltr and UV resistence as per IS 15489:2005, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with slilicon additive @ 1.43 ltr/10 Sqm over and including a coat of exterior primer applied @ 0.902 ltr/ 10 Sqm with roller finish complete all as specified and directed by GE. |
| 66 | S &F for 3 ways sliding anodised aluminium (powder coated) glazed window shutter with frame with the following specification (a) Frame 50 mm x 65 mm x 1.5 mm Thick (b) 35 mm x 35 x 1.5 mm Z section in stiles, rails (c) 35 mm x 35 mm x 1.5 mm T section mullion (d) two shutter with PVC gasket with 4 mm thick tinted glass, including aluminium handles with necessary locking arrangement and one shutter with stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc as directed by Engr-in-Charge. |
| 67 | S&F for Powder coated anodised aluminium ventilator shutters and frame, (half fixed glass and half louvers) aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing lips, rubber lips, rubber packing anodized aluminium snap beading, screws, grills anodized aluminium snap beading, screws, grills anodized aluminium fittings such as peg stays 150mm long (3 Nos), Hinges type B-21 100 mm long (2 Nos), suitable handle (1 No) etc. The vetilator system should be glazed with 4mm thick figured glass, pin head type of size as required in ventilator including taking out/ taking down old shutters complete all as specifed and directed. |
| 68 | M&L for 4mm thick E-board fixed in ceiling and including aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605x605 mm with aluminium main T section of size 36.5 x25 mmx 1.4 mm weighing 0.24 kg per running metre and cross T of size 23.5 x 26.4 x1.4mm weighing 0.191 kg per RM with aluminium wall angle size 40 x 25 x 2 mm including GI supporting wire of 3mm dia including dismantling of wall and ceiling (fibre, pulp, insulation board/salbs/blankets) complete all as specified and directed. |
| 69 | S & F for powered coated anodised aluminum frame for doors, partition wall, windows, ventilators with one or more rebates including joining clear for fixing etc. complete all as specified and directed by Engr-in-charge. |
| 70 | M&L for 18/19mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with screws to timber frame work with external 6mm thick teak wood lipping after dismantling boarding of any description in any position with nailscomplete all as specified and directed. |
| 71 | M&L for 0.9mm thick decorative laminate type-1 of surface finished, colour and pattern as approved fixed with approved adeshive as per manufacturer instruction over plywood, other wood surface etc. after dismantling of old unservicable lamination complete all as specified and directed by the Engineer-in-Charge. |
| 72 | S&F for kitchen cabinet (colour) of depth 300mm made with 18mm thick PVC celluca plywood board (pre-laminated with 5mm thick PVC sheet), one side decorative lamination and other side balancing lamination sheet (white) consisting of carcass 18mm thick PVC sheet and provision of shutter made out of 18mm thick one side decorative lamination PVC sheet all required brackets, stainless steel screw, knobs, kinges, favi quick, solvent cement etc. fixed to wall with stainless steel screw and 18mm thick PVC shelves of density not less than 600 kg/cum by drilling holes complete. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification all as directed by Enigneer-in-Charge. (Note: colour, quality and make approved by GE and cost of all materials and labours including in this item) |
| 73 | S&F for kitchen cabinet (colour) of depth 600mm made with 18mm thick PVC celluca plywood board (pre-laminated with 5mm thick PVC sheet), one side decorative lamination and other side balancing lamination sheet (white) consisting of carcass 18mm thick PVC sheet and provision of shutter made out of 18mm thick one side decorative lamination PVC sheet all required brackets, stainless steel screw, knobs, kinges, favi quick, solvent cement etc. fixed to wall with stainless steel screw and 18mm thick PVC shelves of density not less than 600 kg/cum by drilling holes complete. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification all as directed by Enigneer-in-Charge. (Note: colour, quality and make approved by GE and cost of all materials and labours including in this item) |
| 74 | S & F for Mild Steel guard bars to windows, plain, let in and fixed independently in steel frames including welding etc guard bars and similar work conforming to Fe-290 Grade E-165 complete all specified and directed by Egrs-in-charge. |
| 75 | S&F for 28 to 30 mm thick (stiles) Factory Made Solid PVC Moulded Door Shutter, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 76 | M&L for non skid heavy duty vitrified outdoor (designer) tiles of size 300mmx 300mmX10mm to 12mm thick as in floors etc jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles over 15mm thick screed in CM (1:4) after dismentling of old tiles complete all as specified and directed. (Note:- After vitrified outdoor (designer) tiles work cleaning the surrounding area by the contractor by own arrangement .) |
| 77 | S & F for 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (i.e. CPVC bdass elbow, brass T, brass male threaded acaptor ( MTA/MBTA), brass female threaded acaptor ( FTA/FBTA), tank adaptor, union etc complete to walls and ceilings or laid in floors as in repair complete all as specified and directed.( Note: Cost of pipe and fittings (i.e. CPVC bdass elbow, brass T, brass male threaded acaptor ( MTA/MBTA), brass female threaded acaptor ( FTA/FBTA), tank adaptor, union are inclusive in the items ) |
| 78 | S & F for 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings complete to walls and ceilings or laid in floors as in repair complete all as specified and directed |
| 79 | S & F for 50 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings complete to walls and ceilings or laid in floors as in repair complete all as specified and directed |
| 80 | S & F for 16 mm outer dia CPVC Ball Valve as in repair complete all as specified and directed |
| 81 | M&L for anti-treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors for post constructed building complete all as specified and directed.(Note :- Original purchase voucher of item shall be submitted to the Engr-in- Charge before taking any payment.) |
| 82 | M&L for anti-termite treatement along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron for post constructed buidling complete all as specified and as directed.(Note :- Original purchase voucher of item shall be submitted to the Engr-in- Charge before taking any payment.) |
| 83 | M & L for cutting /uprooting of tree of size 5 cm to 10 cm from walls of bldg up to extended root and spraying of acid of required quantity at any location of bldg upto tow storied and making good disturbed surfaces with cement mortal (1:4) or cement concrete (1:3:6), type C1 using 20 mm graded crushed aggregate including necessary scffolding/through rope with safety belt complete all as specified and directed. |
| 84 | M&L for 20-25 mm thick machine cut kota stone slab flooring laid over 20mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) mixed with pigment to match the shade of kota slab as required at site complete all as specified and directed. |
| 85 | S & F for Urinal (top inlet) with fixing accessories of size 345x320x610 mm all as specified including rectangular shaped urinal partition with frosted glass of thickness 8mm/10mm finish chrome of size 450x900 mm as approved by GE |
| 86 | S & F for towel rack of 600 mm long with lower hangers superior finished CP Brass as in repair complete all as specified and directed and as approved by GE. |
| 87 | S & F for stainless steel plate rack of size 1200 mm x 900 mm x 1 mm thick as in repair complete all as specified and directed as approved by GE. |
| 88 | S & F for plain framed 35 mm the panelled shutter (two pane) withblock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressured treated complete all as specified and directed . |
| 89 | M & L for sintex water tank cover universal full size threat black water tank cover (LID) 500L to 2000L complete all as specified and as directed by Engineer-in-charge. |
| 90 | Repair to existing bib tap, wash hand basin mixer, bathroom mixer, flush tank sensor/ normal type, stop cock of any type for smooth workable/ functioning by providing necessary spare parts as required after removing the bib tap, wash hand basin mixer, bathroom mixer, flush tank sensor/ normal type, stop cock of any type as per users complaint as directed by Engr-in-charge and refixing the same after servicable condition complete all as specified and directed.(Note: Rates for all necessary requirement i.e material, labour, T&P etc. for this repair work are inclusive in this item) |
| 91 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. Please Enable Macros to View BoQ information |
