|
| 1 | Taking down chowkats or frames n.exc 1.5 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed |
| 2 | As per Item No. 1 but exc 1.50 sqm and n.exc 4.00 sqm complete all as specified and directed |
| 3 | Taking down shutters of any description n.exc 1 Sqm each and removing from site complete all as specified and directed |
| 4 | As per Item No. 3 but exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed |
| 5 | Taking down shutters exceeding 1.0 Sqm and not exceeding 2 Sqm and refixing the same opening after modification if any complete all as specified |
| 6 | Supply & Fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed. |
| 7 | Material & Labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications complete all as specified and directed. |
| 8 | Material & Labour Flush door shutters, 30mm thick, solid core construction, with both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. |
| 9 | Supply & Fixing glazed or gauged shutter 35 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) all as per specified and as directed. |
| 10 | Supply & Fixing glazed or gauged shutter 30 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (b) all as per specified and as directed. |
| 11 | Material & Labour for Plain, solid, straight chowkats and frames in 2nd class hardwood , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with additional rebates for fixing second shutter complete all as specified and as directed |
| 12 | Supply & Fixing stainless steel butt hinges medium weight 100mm long complete all as specified and directed |
| 13 | Supply & Fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed |
| 14 | Supply & Fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed |
| 15 | Supplying and fixing aluminium anodised barrel tower bolts of extruded section 150 mm and fixed complete all as specified and directed |
| 16 | Supplying and fixing in repairs aluminium anodised barrel tower bolts of extruded section 150 mm and fixed complete all as specified and directed |
| 17 | Supplying and fixing aluminium anodised barrel tower bolts of extruded section 100 mm and fixed complete all as specified and directed |
| 18 | Supplying and fixing in repairs aluminium anodised barrel tower bolts of extruded section 100 mm and fixed complete all as specified and directed |
| 19 | Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and directed |
| 20 | Supplying and fixing in repairs Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and directed |
| 21 | Supplying and fixing Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and directed |
| 22 | Supplying and fixing in repairs Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and directed |
| 23 | Material & Labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed |
| 24 | Supply & Fixing in repairs for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed |
| 25 | Supply & Fixing in repairs rubber door seal/snake guard with 25mm wide and length varies from 0.75 Mtr to 1.5 Mtr aluminium strip fixed at bottom of door to prevention from snakes/insects as per sample complete all as specified and as directed. |
| 26 | Supply & Fixing 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 27 | Supply & Fixing in repairs 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 28 | Material & Labour for applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of surfaces complete all as specified and directed |
| 29 | Supply & Fixing in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and directed |
| 30 | Supply & Fixing aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and directed |
| 31 | Supply & Fixing Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 32 | Material & Labour for hacking our old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed |
| 33 | Supply & Fixing sheet glass ordinary quality 3mm thick in squares n.exc 0.5 Sqm in each pane complete all as specified and directed |
| 34 | Material & Labour Powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 35 | Material & Labour Powder coated aluminium window shutters, Sliding/side hung /Top hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting complete all as specified. |
| 36 | Supply & Fixing sheet glass ordinary quality 4mm thick in squares n.exc 0.5 Sqm in each pane complete all as specified and directed |
| 37 | Supply & Fixing sheet glass ordinary quality 4mm thick in squares exc 0.5 Sqm in each pane complete all as specified and directed |
| 38 | Supply & Fixing Figured glass 4.0 mm thick pin headed type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 39 | Supply & Fixing in repairs 100mm Hasp and staple, safety type, anodised aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 40 | Supply & Fixing in repairs for selected quality door springs mild steel of size complete all as specified and as directed |
| 41 | Supply & Fixing in repair 25mm dia fancy type aluminium decorative curtain rods of selected color complete all as specified and as directed. |
| 42 | Supply & Fixing in repair 25mm dia fancy type brass brackets of selected color for decorative curtain rods complete all as specified and as directed. |
| 43 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified. |
| 44 | Material & Labour for pre-laminated MDF board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including suitable lipping complete all as specified and directed.Make : Green panel, Century Ply, Green Panel or equivalent |
| 45 | Supply & Fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed. |
| 46 | Supply & fixing of stainless steel hinge of size 65 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed |
| 47 | Supply & Fixing Magnet of suitable size fixed for cabin leafs, drawers etc,complete all as specified and directed Make : Royal or equivalent |
| 48 | Supply & Fixing stainless steel roller of size 25mm x 12mm, male female rolling brackets suitable for baskets complete all as specified and directed , Make : Evershine,Olive or equivalent |
| 49 | Material & Labour for servicing of modular kitchen cabinets shutter including taking down baskets and refixing in the same opening after realigned the sliding channel, easing and serviceable complete all as specified and directed |
| 50 | Supply & Fixing in repairs of Designer Stainless steel baskets of any type and any size of length n.exc 750mm and depth n.exc 500mm and height n.exc 200mm complete all as specified and as directed Make : Evershine,Olive or equivalent |
| 51 | Taking down unserviceable IWC & Supply & fix Vitreous china squatting pan 'Orissa' pattern of size 580mm ˣ 440mm white with integral foot rest excluding flushing cistern & flush pipe including provision of lime concrete bedding fixed in repairs complete all as specified and directed |
| 52 | Supply & Fixing in repairs Vitreous china wash down water closet pan (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminized hinge device complete all as specified and directed by EIC. |
| 53 | Supply and fixing in repair PVC valve less symphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc complete all as specified and directed |
| 54 | Supply & Fixing in repairs Hand shower health faucet Abs body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinges with complete fitting complete all as specified and directed Make : Jaquar or equivalent in Kohler/ Roca) |
| 55 | Material & Labour WC connector 110 mm PVC SWR for WC complete all as specified and directed. |
| 56 | Material & Labour for taking down steel tubing and connections of 15 mm dia with all fitting complete all as specified and directed |
| 57 | Material & Labour for taking down steel tubing and connections of 20 mm dia with all fitting complete all as specified and directed |
| 58 | Supplying and fixing or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge. |
| 59 | Supplying and fixing or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge. |
| 60 | Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar 1:3 to ends for concealed water tubing and making good for cutting n.exc 10 cm girth.complete all as specified and directed |
| 61 | Supplying and fixing in repair stop valves fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe complete all as specified and directed.Make : Jaquar or equivalent in Kohler/ Roca) |
| 62 | Supply & Fixing in repair Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe Make : Jaquar or equivalent in Kohler/ Roca) complete all as specified and directed |
| 63 | Supply and fixing,in repair 15mm bore fancy type chromium plated two way bib taps, with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Jaquar (CON-041KN) or equivalent as approved. |
| 64 | Supply & Fixing in repairs 15mm dia Brass Chromium Plated Hot and Cold mixer screwed down for iron pipe and fixed complete all as specified and directed |
| 65 | Supply & Fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified |
| 66 | Supply & Fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank Supply & Fixingly nuts, screwed for iron pipe & fixed in repairs of about 15mm diameter complete all as specified and directed Make : Jaquar or equivalent in Kohler/ Roca) |
| 67 | Supply & Fixing in repairs Swan neck pillar cock/ sink cock, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank Supply & Fixingly nuts, screwed for iron pipe & fixed in repairs of about 15mm diameter complete all as specified and directed.Make : Jaquar or equivalent in Kohler/ Roca) |
| 68 | Supply and fix in repair 100mm dia Stainless steel anti cockroach trap including chrome finished jali with provision to receive the waste water pipe and fixed with white cement all around complete all as specified. |
| 69 | Supply & Fixing in repair vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets fixed in repairs complete all as specified and directed |
| 70 | Supply only waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 71 | Material & Labour for 600 mm x 450 mm beveled edge mirror or selected quality glass mounted on 6 mm thick AC building board on commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washer and fixed in repairs complete all as specified and directed |
| 72 | Supply & Fixing in repairs PVC bath cabinet with built in shelf and looking mirror at shutters of size 54 x35x 13 CM of Make seniority brand as approved by GE.complete all as specified and directed |
| 73 | Supply & Fixing in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 74 | Supply & Fixing in repairs stain less steel plate rack fixed on wall etc complete, made out of 1.00 mm thick of over all size 0.75 x 0.75M with shelves and racks complete as approved by GE. |
| 75 | Supply & Fixing in repairs bib taps Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of about 15mm bore diameter.Make : Jaquar or equivalent in Kohler/ Roca) |
| 76 | Supply and fixing in repairs brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed Make : Jaquar or equivalent in Kohler/ Roca) |
| 77 | Material & Labour tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repairs complete all as specified and directed. |
| 78 | Supply & Fixing in repairs corner glass shelf (with brackets) complete all as specified and directed Make : Jaquar or equivalent in Kohler/ Roca) |
| 79 | Supply & Fixing in repairs Glass shelf (with brackets) 600mm long complete all as specified and directed |
| 80 | Supply and fixing in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I.complete all as specified and directed |
| 81 | Supply and fixing in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I.complete all as specified and directed |
| 82 | Supply and fixing in repairs of ball brass valve, high pressure with polythene float and fly nut,screwed for iron pipe or brass ferrule of size 20 mm complete all as specified and directed. |
| 83 | Supply & Fixing in repairs Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia complete all as specified and directed. |
| 84 | Material & Labour for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed |
| 85 | Supply & Fixing in repairs flexible PVC waste pipe of size 32mm dia used for wash basin & sinks complete all as specified and directed |
| 86 | Supply & Fixing in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed |
| 87 | Supply & Fixing in repairs PVC water tank cover, black/any colour suitable to the existing PVC water tank 500/1000 ltrs capacity complete all as specified and as directed |
| 88 | Dismantling of cast iron/PVC drain pipes jointed in cement mortar and taking out of walls for 75mm/100mm dia of Pipe complete all as specified and directed. |
| 89 | Supply & Fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints 75 mm dia bore pipe,fixed to walls including all necessary fittings complete all as specified and directed. |
| 90 | All as per Item No. 89 but 110mm dia of pipe complete all as specified and directed |
| 91 | Supply & Fixing PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed |
| 92 | Supply & Fixing in repairs Door closer Aluminium Extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 93 | Supply & Fixing PVC (SWR) multi floor trap with grating including jointing with solvent cement of outlet dia 75mm complete all as specified and directed |
| 94 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 95 | Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removing the debris off from MoD land complete as directed by Engr-in-Charge. |
| 96 | Material and labour for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified and directed |
| 97 | Material and labour for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 98 | Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 99 | Material and labour for Non skid/Matt/Glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 100 | Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 101 | Taking down cement plaster on brick or stone wall as in jambs & sills etc including raking not joints scrubbing down with water complete all as specified and directed. |
| 102 | Material & Labour for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 103 | Material & Labour for rendering 10mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 104 | Material & Labour for rendering 5mm thick in CM 1:3 on brick or concrete surfaces as in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 105 | Material and labour for new plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 106 | Material & Labour for preparation of newly plastered surfaces of wall by vacuum based sanding machine, applying 1mm thick wall care putty (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of distemper white or coloured by auto roller complete all as specified and directed. |
| 107 | Material & Labour for preparation of newly plastered surfaces & applying three coat of white wash on ceilings complete all as specified and as directed.. |
| 108 | Material & Labour for preparation of plastered or unplastered old surfaces of walls and apply one coat of white wash complete all as specified. |
| 109 | Material & Labour for preparation of plastered or unplastered old surfaces of ceiling and apply one coat of white wash complete all as specified. |
| 110 | Material & Labour for preparing old distempered surfaces by washing down applying one coat of Oil bound distemper complete all as directed. |
| 111 | Material & Labour for complete removal of existing treatment from old decorated plastered surfaces plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 112 | Material and labour for preparing old treated surfaces of wall and applying one coat of superior quality anti algae weather proof acrylic paint exterior grade on external surface by auto roller complete all as specified and directed |
| 113 | Material & Labour for preparing old decorated wooden or wood based surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed |
| 114 | Material & Labour for prepararing old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 115 | Material & Labour for applying two coat of floor paint (floor protector on Chequred tiles/Interlocking paver block/Concrete surface of any colour and preparation of floor surfaces with wire brush and removal of all dust particles and washing the surface with water before applying the paint complete all as specified and as directed. |
| 116 | Material & Labour in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 117 | Material & Labour for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. complete all as specified and directed. |
| 118 | Supply & Fixing in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 119 | Material & Labour for providing granite slab (Black Galaxy) 20mm thick in repairs (table rubbed and polished) in steps, jambs, pillars, window- sills, cooking platforms, floors and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 120 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles portions ordered to be dismantled complete all as specified and directed |
| 121 | Material & Labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 122 | Supply & Fixing in repairs Vitreous china wash down water closet pan (EWC) with flush tank in single piece including plastic water closet seat, closet pattern with flat bottom, and cover and aluminized hinge device (Make : Jaquar or equivalent in Kohler/ Roca) complete all as specified and directed by EIC. |
| 123 | Supply & Fixing in repairs Towel shelf double layer 600mm long complete all as specified and directed (Make : Jaquar or equivalent in Kohler/Roca) |
| 124 | Material & Labour for Fancy type looking mirror of size 600mm x 750mm or 750mm diameter of selected quality glass mounted on 6 mm thick AC building board on commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washer and fixed in repairs complete all as specified and directed |
| 125 | Supply & Fixing in repairs Towel Ring of Chromium plated 300mm length/dia fixed with and including Chromium plated brass screws complete all as specified and as directed. Make : Jaquar/Kohler/Roca |
| 126 | Supply & Fixing in repairs Wall mounted shower panel including all accessories complete all as specified and as directed. Make : Jaquar/Kohler/Roca Please Enable Macros to View BoQ information |
