|
| 1 | Note for all items:(i) Cost of labour for providing new items including replacement /Demolition/ dismantling/ taking out/down of old unserviceable items shall be deemed to be inclusive under respective items. (ii) Material to be incorporated shall be measured and paid separately under relevant items 1 to 139 as given below. (iii) Supervisor will collect the complaints from the complaint cell and complete the same and feedback given to the complaint cell on same day & if complaint is not attended within 24 hour a penal recovery @ Rs. 1000.00 per complaint per day will be recovered from contractor due payment.(iv) The complaints for the above works shall be registered by contractor at the B/R complaint cell of AGE B/R-II.(v) Stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(vi) Tools ,Skilled Tradesmen with helper and Transport with driver for attending of above complaints shall be arranged by contractor. (vii) The spares / items required for the works shall be measured separately under relevant item as supply & fixing.(viii) Excavation, returning/ filling and removal shall be measured and paid for separately under relevant items.(ix) A complaint register will be maintained by the contractor bearing details of every coomplaint attended shall be entered by the contractor daily including details like building No, Location etc, and the register shall be signed by contrcator, JE Civ and Engineer in Charge. The register will be submitted alongwith RAR/ Final bill for technical check.(x) The rate quoted by the contractor for below jobs under shall be inclusive of of all the above notes. |
| 2 | S & F in repairs, Fancy Type CP long body bib tap cast copper alloy with crutch or butterfly handle 15mm bore screwed down screwed for iron pipe complete all as specified and as directed. |
| 3 | S & F in repairs, Bib tap, Chromium Plated cast copper alloy with crutch or butterfly handle 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 4 | S & F in repairs,Bib tap15 mm standard of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-90 gms) complete all as specified and as directed. |
| 5 | S & F in repairs,15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms complete all as specified and as directed. |
| 6 | S & F in repairs,20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms. complete all as specified and as directed. |
| 7 | S & F in repairs Towel Rail 600mm long of CP D type fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 8 | S & F in repairs,15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 9 | S & F in repairs,15mm bore CP brass angle stop valve/cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 10 | S & F in repairs,15mm bore CP brass stop cock fancy type, chromium plated with iron long shank and cup Concealed type complete all as specified and as directed. |
| 11 | S & F in repairs, Waste coupling PTMT chromium plated (Half or full tread) for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore-45 gms complete all as specified and as directed. |
| 12 | S & F in repairs, Waste coupling PTMT chromium plated (Half or full tread) for wash hand basin with long screwed shanks and fly nuts fixed in repair 40mm-60gms complete all as specified and as directed. |
| 13 | S & F in repairs, Waste coupling brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, fixed 40mm bore complete all as specified and as directed.. |
| 14 | S & F in repairs, 32 mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, complete all as specified and as directed. |
| 15 | S & F in repairs, PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement complete all as specified and as directed. |
| 16 | S & F in repairs,Wash basins, vitreous china white (flat back type) of size 550x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and as directed. |
| 17 | S & F in repairs,Wash basins, vitreous china white (Angle back type) of size 400x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge. |
| 18 | S & F in repairs,Wash basins, vitreous china white of oval shape counter top,size-460x400x140mm, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and as directed. |
| 19 | S & F in repair Vitreous china squatting pan “Orrisa” pattern of size 580X440mm “White” with 'P' or 'S' Trapfront or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe), connection to trap and to flushing pipe anti- syphonage pipe etc complete making good complete all as specified and as directed. |
| 20 | S & F in repair Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed. (including making good to floor and fixing in repairs) |
| 21 | S & F Stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and as directed. |
| 22 | S&F in repairs, CP brass WHB mixer single lever for cold and hot water screwed down 15mm bore all as specified and directed |
| 23 | S/F in repairs 15 mm dia wall mixer brass chromium plated fixed to existing pipe/connections cluding telephonic hand shower and all necessary fittings all as specified and directed by Engr In Charge |
| 24 | Supply and fixing in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site |
| 25 | Supply and fixing 125mm dia CP grating fixed in position complete all as specified and as directed. |
| 26 | S & F in repairs, PVC threaded cover/lid for PVC over head water tank suitable for capacity of above 500 ltrs and upto 1000 ltrs capacity complete all as specified and directed at site |
| 27 | Supply and fixing in repair PVC bath room mirror cabinet size 450x600 fixed to wall with screw and rawl plugs, fixed as in repair complete all as specified and directed . |
| 28 | Supply and fixing in repair 90 cms x 90 cms x 25 plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, complete all as specified and directed. |
| 29 | Supply and fixing in repair soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed. |
| 30 | Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in repair position complete all as specified and directed. |
| 31 | Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional complete all as specified and directed. |
| 32 | Material and labour for PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75/100mm dia complete all as specified and directed. |
| 33 | M & L for 600mm x 450mm size beveled edge mirror of 6mm thick selected quality mounted on 6mm thick plywood with Circular/rectangular shape chromium plated screws with washer complete all as specified and directed. |
| 34 | S & F in repairs,Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device complete all as specified and directed. |
| 35 | S & F in repairs,125 mm dia Fancy type shower rose with arm swivel type fixed to 15mm dia pipe complete all as specified and directed. |
| 36 | Taking down steel tubing and connections including removing from site of 15mm bore pipe complete all as specified and directed. |
| 37 | S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed. |
| 38 | Taking down steel tubing and connections including removing from site of 20 mm bore pipe complete all as specified and directed. |
| 39 | All as per item No 38 above but 20mm bore complete all as specified and directed. |
| 40 | M & L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and as directed. |
| 41 | M & L for Flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern fixed in repair complete all as specified and as directed. |
| 42 | M & L for Rotational moulded polyethylene (trippled layer) water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres including 20mm PVC float valve all as specified in SSR Part-I complete all as specified and directed. |
| 43 | All as per item No 42 above here in before but 1000 litres complete all as specified and as directed. |
| 44 | Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specified and as directed. |
| 45 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore complete all as specified and as directed. |
| 46 | S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore complete all as specified and as directed.. |
| 47 | S&F in repair PVC (SWR) Bends any radius for 110mm bore complete all as specified and as directed.. |
| 48 | S&F PVC in repair (SWR) Bends any radius for 75mm bore with oval access door complete all as specified and as directed. |
| 49 | S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore complete all as specified and as directed. |
| 50 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr. complete all as specified and as directed. |
| 51 | M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr. complete all as specified and as directed. |
| 52 | S/F in repairs of glass shelf assembly corner/Straight consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 53 | S/F in repairs of glass Shelf fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed. |
| 54 | Dismantling of wall and ceiling boards (fibre,pulp,insulations etc) orinsulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 55 | Supply and fix aluminium anodised snap grid ceiling of frame size 605 x 605mm, main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders Hangers 4 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 56 | Supply and fix 6 mm thick Non asbestos 600X600mm cement building boards ( Decorative E-Board), fixed to aluminium framework with screws in as ceiling complete all as specified and directed. |
| 57 | Taking down chowkats or frames exceeding n.exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 58 | Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and as directed. |
| 59 | Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 60 | S & F in repair 35mm thick plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered board with commercial veneering on both faces. The size of rail and stile as per IS -1003 (Part-I) klin seasoned and chemically pressure treated complete all as spd and directed (2nd class hard wood rail and stile) complete all as specified and directed. |
| 61 | S & F in repair 35mm thick glazed & skeleton shutters of 2nd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as spd in SSR Part-I section 8 clause 8.2 (A) complete all as specified and directed. |
| 62 | S & F in repair Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed |
| 63 | S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed |
| 64 | Supply and fix in repair for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed. |
| 65 | Supply and fixin repair for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed. |
| 66 | S&F in repair 18/19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 67 | M & L for 19/20mm thick block board Grade I quality exterior grade, decorative type with decorative face veneers on one face for cupboard shutters etc complete all as spd and as directed. |
| 68 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified. |
| 69 | M & L for Second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm complete all as specified and as directed. |
| 70 | S & F Anodised aluminium window frame powder coated double rebated(16 gauge aluminium section ISI marked, weighing not less than 0.55 Kg/RM ,size of frame 100mm ) incl side hung /sliding glazed shutter and wire gauged window shutter, 5 mm thick tinted sheet glass selected quality of any colour, wire gauge ,hinges, necessary jointing cleat, glazing clips, rubber packing, aluminium handle etc, . and including opening of AC complete, including taking down old window of any type complete all as specified and directed. |
| 71 | Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter, partly glazed with necessary joining cleats,glazing clips,rubber neoprene aluminium door handle 150 mm size 02 Nos, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. |
| 72 | M & L for in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 80 kg aluminium extruded section body complete all as specified and as directed. |
| 73 | M & L Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately |
| 74 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and as directed. |
| 75 | M & L for 3mm thick figured glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 76 | S & F in repair Aluminum anodized barrel tower bolt extruded section 150mm long complete all as specified and as directed. |
| 77 | M & L for 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminum alloy & fixed complete all as specified and as directed. |
| 78 | S & F in Aluminum anodized handles fabricated type of 150mm long complete all as specified and as directed. |
| 79 | S & F in repairs Aluminium anodised handle extruded section and fixed of size 150mm complete all as specified and as directed. |
| 80 | S & F in repairs Aluminium anodised barrel tower bolts extruded section of size 150 mm complete all as specified and as directed. |
| 81 | M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 82 | S & F in repairs, 75 mm long Butt hinges, (ISI marked) medium weight cold rolled mild steel fixed with screws or welding fixed in repair including taking down shutter and refixing in same position complete all as specified and as directed. |
| 83 | All as per Ser item No 82 above but 100 mm long complete all as specified and directed. |
| 84 | S & F in repairs, 300mm, ordinary rat tail rod pattern springs Mild steel Helical door springs including roller plate complete of 150mm long complete all as specified and as directed. |
| 85 | S & F in repairs, Floor door stopper 150MM of aluminium alloy body and tongue anodized with double rubber fixed in repair complete all as specified and as directed. |
| 86 | M & L for, Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with wooden/MS beads complete all as specified and as directed. |
| 87 | M & L 18/19 mm thick solid PVC board, as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed. |
| 88 | S & F in repairs,125mm long safety type aluminium anodized hasp and staples complete all as specified and as directed. |
| 89 | S & F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 90 | M & L for Preparing of previously painted Old steel surfaces of any description over 10 cm width or girth and applying One coat of synthetic enamel paint complete all as specified and directed. |
| 91 | M & L for Wooden beading of teak wood, bull nosed ,chamfered or rounded fixed with screw to pre laminated board area exc 3 Sqcm and n.exc 6 Sqcm in section complete all as specified and as directed. |
| 92 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed |
| 93 | Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 94 | M & L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough complete all as specified and as directed. |
| 95 | S&F Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:6 including complete all as specified and directed. |
| 96 | M & L for Glazed ceramic colored tiles 600mmx300mmx 6 to 7mm thick/450mm x300 mm x 7mm,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4. complete all as specified and directed. |
| 97 | M & L for Virified Ceramic tiles 10 mmthick (square/ rectangular) light shade polished, area of each tiles exceeding 0.36 sqm,but not exceding 0.42sqm as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 98 | All as per ser items No 97 above but skirting, dadoes complete all as directed. |
| 99 | Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as directed. |
| 100 | M & L for Granite (of any type) tiles single piece as per requirement, 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 101 | M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement complete all as specified and as directed. |
| 102 | M & L for Chequered cement concrete tiles of size 30cm x 30cm x 20 to 25 mm thick glossy finish coloured and pattern in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over with grey cement and no pigment over 15mm thick screed screed bedding in cement mortar 1:4 as in sub base complete all as specified and directed. |
| 103 | M & L for 25 mm dia aluminium anodised dreproy rod with hanging and side brackets powder coated textured finish and wall thickness 1mm complete all as specified and directed. |
| 104 | M & L for 20 mm dia Harrison rails, mild steel, chromium plated with fixing brackets stops, rollers etc.steel dreproy rod with hanging and side brackets wall thickness 1mm complete all as specified and directed. |
| 105 | Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 106 | M & L for Brick work with sub class B (old size) brick straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and as directed. |
| 107 | M & L for Rendering 15mm thick cement plaster in CM 1:4 on faces of brick work with or conctete finished even and smooth without using extra cement complete all as specified and as directed. |
| 108 | M & L for Preparation of newly plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as specified and directed. Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 109 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified and as directed. |
| 110 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally) complete all as specified and as directed. |
| 111 | M & L for Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 112 | M & L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator two coat of oil bound distemper on walls complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 113 | M & L for Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 114 | M & L for Preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed. |
| 115 | Dismantling Plain or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified and directed. |
| 116 | S& F in repair 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed . |
| 117 | S& F in repair 0.50mm thick Pre painted galvalume alluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and directed. |
| 118 | M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 119 | Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed. |
| 120 | Demolition of cemnent concrete (unreinforced) as in roofs,floors (other than ground floors),beams,starcases,landing,chajjas and similar suspended work complete all as specified and as directed. |
| 121 | M & L for PCC 1:2:4 type B-0 (12.50mm graded crushed stone aggregate) as in padding finished even and smooth without using extra cement complete all as specified and as directed. |
| 122 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC Mesured and Paid Separately. |
| 123 | M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm. complete all as specified and as directed. |
| 124 | M&L for One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions(ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions |
| 125 | M & L for Applying one coat of aluminium paint on top of APP membrane complete all as specified and as directed. |
| 126 | M&L for cement concrete tiles 25cm x 25cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors with grey and pigment; including 15mm screed cement mortar (1:6) and pigment size conforming complete all as specified and as directed. |
| 127 | Supplied only for Integral Liquid water proofing compound complete all as specified and as directed. |
| 128 | Attending complaint for repair to easing of any type of Doors/window/cup board shutters incl Alu doors by tightening of hinges/handles/aldrop bolt/tower bolt/knobs, hasp and staple etc of any size/ any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including replacement of minimum defective item if required, complete all as specified and directed. |
| 129 | Petty repair to existing steel window/rolling shutters, pressed steel frame rat tails spring, steel almirah, mortise lock fitted in steel almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional (welding rod welding machine, small fittings such as windows handle, hinges etc will be provided by the contractor removing the steel window shutters from the frame and re-fixing after making serviceable complete in IHQ Camp and DGIS Area complete all as specified and directed. |
| 130 | Attending complaints related to plumber/ water supply and obtaining completion from user, this includes minor repair of taps by replacement of washer/jumpers, tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, repair/ replacement of face mohra etc including materials like GI fittings of reqd size M.Seal, safeda, sootar and washers etc, complete all as specified and directed. (Replacement of taps, PVC connections/ face mohra's of any description & any other material shall be paid separately as supply only.) |
| 131 | Opening of air block/blockage of GI pipe from outlet of water tank to all internal fitting to enable to smooth flow of water from bib tap/shower/WHB piller taps/stop cock complete by air pressure/water gravity pressure etc complete all as directed and specified. |
| 132 | Labour only for Cleaning/sweeping and removing all scale and dirt, mud, small grass etc, from roof surface and cleaning all Rain water pipe /holes and free from all dirt of circulating pipes, etc. complete all as specified and as directed. |
| 133 | Repair Only of Steel rolling shutter, 1.25mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual typeIncluding bearing, Rollers, Gear Box, Top cover, anchoring rod Item which Changed during repairing Safety lever locks mild steel with 4 levers for rolling shutters 10068 Ball bearing for rolling shutters PER SQUARE including One coat of Synthetic enamel paint etc complete all as specified and as directed. |
| 134 | S & F of manual horizontal Venetian blinds, including all necessary accessories, brackets, fasteners, mounting hardware, and operating mechanisms. Blinds shall be made of aluminium slats, 25mm width (or as specified), powder-coated finish in approved color. Slats shall be corrosion resistant, UV -stable, and easy to clean. Installation shall be done on window recess/ surface mounted, complete with cork lock, tilt mechanism, and all operational parts for smooth opening and closing. All works shall be carried out as per manufacturers instructions complete all as specified and directed. |
| 135 | S & F in repair 12 mm Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, hinges and handle complete fittings, drilling holes required instructions and complete all as specified and as directed. |
| 136 | S & F in repair Towel rack with hooks 3 Nos wall mounted mounted bathroom, l for hanging Keys, lvory required instructions and to the approval of the Engr in Charge complete all as specified and directed. |
| 137 | S&F in repair aluminium body brown coated bottom Door Sealing Strip size 36'' / 92cm with long lasting black rubber, complete all as specified and directed. Make : Infinite Tech & Oligitdi complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
