Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: EXECUTIVE ENGINEER, MECHANICAL &-HOSPITAL DIVISION , JAMMU Supply of Empty Refillable D-type Bulk Medical Oxygen Cylinders(40 nos.) & Nitrous Oxide Cylinders (10 nos.) and Cylinder Trolley for Police Hospital Jammu. MHDJ/e-NIT 88 of 2026-27 Dated: 23.06.2026 Due : 30.06.2026 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. 0.0 Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATES INCLUSIVE ALL TAXES Excise Duty GST Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2
Supply of Empty Refillable D-type Bulk Medical Oxygen Cylinders (40 nos.) & Nitrous Oxide Cylinders (10 nos.) for Police Hospital Jammu with technical specifications as mentioned below. The cost includes equipment cost (including valves and other Standard and accessories with relevant certification mentioned below), transportation charges, unloading at site, GST and all taxes as applicable. 1. Cylinder: Specifications2. Refillable, High Pressure, Seamless, Steel Gas cylinder quenched and tempered, certified and approved by PESO (Chief Controller of Explosives).3. BIS Marked/ISO Certificate of quality/Explosives safety Certificate.4. Standard-IS 7285 (Part 2) 2004 & Part 1 (2004).5. Water Capacity 46.7Ltr6. Hydrostatic Test Pressure 250Bar7. Max Working Pressure 150 Bar at 15°C8. Outer Diameter (approx) 232 mm9. Min Wall thickness 5.5mm10. Tare weight (approx) 50 kg11. Length approx. 1370 mm12. BIS/PESO certificate mentioning manufactured quantity and date of manufacturing with 1 year warranty1. Valve: Specifications1. Bull nose type Valve2. Brass, chrome plated with working pressure of 150 bar at 15°C and should be able to withstand Hydraulic test Pressure of 250 kgf/cm² as per IS 3224-2002 (latest) fitted with cylinder.3. All fittings to be leak proof4. Certified by PESO5. Valve protection Cap6. Neck ring7. The valve must be attached to cylinder neck by screwing and not making any permanent attachment or inserting adapter in between.2. Other Standard and accessories:1. Each Cylinder shall have matching key cum spanner to release oxygen.2. Neck cap3. Cylinder transportable as per ISO 11119-1-19974. Stamp marking as per ISO-13769 of 20025. Certificate of calibration.6. PESO Filling Permission/ certificate: Certificate should be for each cylinder Identified with a permanently engraved S.No. of the cylinder.7. Inspection certificate from factory/manufacturer8. Capable of being stored continuously at ambient temperature 0-50°c at relative humidity 15-90%9. Colour Code as per IS 3933-1966 (Medical Oxygen and Nitrous Oxide Cylinders)10. Cylinder Marking as per IS-7285 (Part 1) 2004 on the areas in formed neck (engraved): a. S.No./ Year code of manufacturing b. No of standard/code of manufacturing c. Test pressure & date of hydraulic test d. Tare weight e. Cylinder No f. Contents g. Name/Identification/stamp of manufacturer11. HST (Hydra Test Certification) from test shop of CCOE, PESO, DPIIT, Ministry of Commerce & Industries.12. Conformity of standards ISO-9001
3
Providing, and testing of MGPS cylinder trolley suitable for handling one number medical gas cylinder of up to 46.7 litre water capacity (D-type/Jumbo), heavy-duty Mild Steel (MS) with powder-coated, scratch-resistant and anti-corrosive finish, complete with sturdy base frame, vertical support, dual chain/belt locking arrangement for secure holding of cylinder, rubber padding for protection, ergonomic handle, and heavy-duty rubber/PU wheels for smooth and noiseless mobility., including all accessories and fittings, complete in all respects as per the technical specification mentioned below. The cost includes equipment cost and accessories, transportation charges, unloading at site, GST and all taxes as applicable.Technical Specifications for MGPS Cylinder Trolleys• Construction Material: Constructed from heavy-duty mild steel (MS) with a powder-coated, scratch-resistant finish.• Structure: Fabricated with 1 ¼” Outside Diameter (OD) piping or similar reinforced tubular structures, often featuring a base plate with a minimum thickness of 5mm.• Cylinder Compatibility: Designed for standard B-type (approx. 10 Ltr), D-type, or jumbo oxygen cylinders (diameters 100mm to 250mm, heights up to 1600mm).• Safety Features:o Retaining Straps/Chains: Neoprene, nylon, or chain restraints are mandatory to secure the cylinder firmly.o Anti-Static Wheels: Often fitted with anti-static wheels/tyres to reduce risk in clinical environments, particularly in operating theatres.o Spark-Proof: Wheels are often made of conductive rubber to prevent sparking.• Wheel Configuration:o Typically fitted with two large, solid, rubber-tyred wheels (min. 6-8 inch) for movement, often with an additional swivel castor (125mm) for stability.• Load Capacity-Single Cylinder: Up to 150 kg.• Ergonomics & Design:o Ergonomic push/pull handles for safe maneuverability.o Designed for low manual force operation (less than 10kg - 15kg of force).o Includes a toe plate or curved base for easy loading.• Finish: Corrosion-resistant, often mirror-polished or powder-coated in accordance with IS 158:1981, making them easy to clean and disinfect. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
