|
| 1 | Earth work in excavation in foundation in all kinds of soil with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at place away from work sites with all leads and lifts including cost of all labours and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge. |
| 2 | Supplying and filling sand in foundation and plinth not exceeding 23 cm thick in layers including watering and ramming with cost conveyance , royalty, taxes of the materials and labour with T&P required for the work etc. complete (measurement will be taken on finished compacted section only) as directed by the Engineer-in-charge |
| 3 | Cement concrete of proportion (1:3:6) in foundation and floors using 4 cm size clean hard black crusher broken granite stones metal of approved quality and from approved quarry including hoisting ,lowering and laying concrete in layers not exceeding 15 cm thick to the required level , ramming ,watering and curing etc. complete including cost and conveyance of all materials with al taxes and royalities and all labours with T&P required for the work etc. complete including dewatering if required as directed by the EIC. |
| 4 | Providing, lifting, hoisting and laying in positioning RCC M-25 grade including cost of Centering and shuttering using 20mm and down grade size black hard granite (Crusher Broken) chips of approved quality from approved quary including the cost of all materials, cost of labour, conveyance, taxes , loading, unloading,T&P, royalty, labour cess all complete as per direction of EIC but excuding cost of the steel reinforcement. |
| 5 | Column BASE |
| 6 | Plinth Beam |
| 7 | Column |
| 8 | Roof Beam |
| 9 | Lintel |
| 10 | Chajja |
| 11 | Roof Slab |
| 12 | Cutting, straightening, coiled or bent up MS Rod of TDR steel using SAIL/RINL/TATA/JINDAL/SHYAM Steel including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for RCC work and hoisting lowering laying including cost, conveyance, taxes of MS Rod or TOR steel and binding wire of 18 to 20 gauge and labour required for the work for bending , binding and tying the grills etc complete |
| 13 | Provding laying 2.5mm thick grading concreate of proprotion (1:2:2) using 6mm size crusher broken black hard granite chips from approved quarry, scarping and cleaning the surface, finishing smooth to proper slope and gradient including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, curing, T&P etc. all complete as per the direction of the EIC |
| 14 | Fly Ash brick masonry of size(25×12×8)cm having CS not less than 75 Kg/cm2 in cement mortar(1:6) in foundation and plinth from approved quarry including splay cutting, circular moulding and similar type of work with all necessary projections and champering and core belling, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour and T&Prequired for the work as directed by EIC |
| 15 | Fly Ash brick masonry of size(25×12×8)cm having CS not less than 75 Kg/cm2 in cement mortar(1:6) in super structure from approved quarry including splay cutting, circular moulding and similar type of work with all necessary projections and champering and core belling, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour and T&Prequired for the work as directed by EIC |
| 16 | Providing 6mm thick cement plaster in cement mortar of (1:4) to RCC surface including roughening , scarping, cleaning and finished smooth including the cost of all materials, cost of labour, conveyance, loading and unloading , all taxes and royalties, scaffolding, watering and curing, sundries, T&P etc complete as per direction of the EIC |
| 17 | Providing 12mm thick cement plaster in cement mortar of (1:6) including racking out joints, scarping, cleaning the surface and finished the plastered surfae smooth using wooden floats with proper plumbs and level including the cost of all materials , labour , conveyance taxes, loading and unloading, labour cess, royalties, fcaffolding, watering and curing T&P etc as per direction of the EIC |
| 18 | Providing 16mm thick cement plaster in cement mortar of (1:6) including racking out joints, scarping, cleaning the surface and finished the plastered surfae smooth using wooden floats with proper plumbs and level including the cost of all materials , labour , conveyance taxes, loading and unloading, labour cess, royalties, fcaffolding, watering and curing T&P etc as per direction of the EIC |
| 19 | Providing, fitting and fixing in proper position Seasoned Dressed Non-Sal wood Chaukaths of best quality with applying coat tar2 coats coaltar on the wall sie surface of the choukath inluding cutting the grooves in chaukaths including cost of all matrials , abour , conveyance, taxes, T&P etc complete as per direction of the EIC |
| 20 | Supplying and fixing W.I. Clamps 33cm to 38cm long of 35mm*5mm size for doors window and ventilators including fixing in cement concrete (1:3:6) with 12mm to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials, conveyances taxes etc all complete as per direction of the EIC |
| 21 | Supplying, fitting an fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc . Complete as per direction of the EIC |
| 22 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glas of approved quality complete with frame, shutters and all fitting and fixtures |
| 23 | Supplying, fitting and fixing of G.I. Grills in windwo made out of GI square bars , angles, flats etc painted with red oxide primer cost of all materials, lablur , conveyance, taxes loading, unloading, T&P etc all complete. |
| 24 | Supplying, fitting and fixing of G.I. Doorss/windows/grill gate made out of GI square bars , angles, flats, plate, Hollow pipes etc etc painted with red oxide primer cost of all materials, lablur , conveyance, taxes loading, unloading, T&P etc all complete. |
| 25 | Supplying, fitting and fixing Vitrified Tiles in floors of size 600m*600mm (Plain/Ivory) of approved make confirming to IS:13755 ladi on 20mm t hick cement mortar (1:4) and filling joints with white cemnent of approved quality including cost of converyance, taxes , labour etc as per direction of the EIC |
| 26 | Supplying, fitting and fixing Vitrified Tiles in dados, skirting and risers of steps over 12mm thick cement mortar (1:3) joined with neat cement slurry mixd with coloring pigmentys to match teh colour and shade including the cost of wasing , polishing cost of materisla, cost of all labour, conveyance, taxes, lasing & unloading T&P watering and curing etc complete as per direction of the EIC |
| 27 | Supplying, fitting and fixing Vitrified Industrial Floor Tiles size 300m*300mm confirming to IS:4457 ladi on 20mm t hick cement mortar (1:4) and filling joints with white cemnent of approved quality including cost of converyance, taxes , labour etc as per direction of the EIC |
| 28 | Providing fitting fixint up false ceillling by using 12.5mm thick fire line gypsum boards of approved desing and drawing in all floors with G.I section of 4 sides of alls to be fixed by means of steel scrw and PVC plug and the GI grid 2\\"*2\\" to be suspended from ceiling inlcuding cost off all materials al labour all T&P atec requrie fro the work complete ain ll respect as per dirction of the EIC |
| 29 | Providing fitting fixing of premoulded decorative corner beading of GRG having cross sectional dimension 112*80mm and fixing the same by providing PVC plug screw cornice adhesive fevicol etc complete as per direction of the EIC |
| 30 | Finishing the wall surface with Acrylic wall puty (water based) of approved make and finishing smooth even surface to receive painting including cost of all T&P and materials etc complete as per direction of the EIC |
| 31 | Priming over the plastered surface with one coat of water bound cement primer of approved quality and make including cost of all materails , labour , conveyance, taxes, loading, unloading, scaffolding T&P etc all complete as per direction of the EIC |
| 32 | Providing and painting with two coats of Plastic emulsion paints of quality make and shade to give an even surface including the cost of all materials , lbaour conveyance, taxes, loading, unloading, scaffolding T&P etc all complete as per direction of the EIC |
| 33 | Providing and painting with two coats of weather coat of approved quality make and shade to give an even surface including the cost of all materials , lbaour conveyance, taxes, loading, unloading, scaffolding T&P etc all complete as per direction of the EIC |
| 34 | Providing and painting with two coats of synthetic enamel paints over one coat of primer with enamel paint of approved quality make and shade to give an even surface including the cost of all materials , lbaour conveyance, taxes, loading, unloading, scaffolding T&P etc all complete as per direction of the EIC Please Enable Macros to View BoQ information |
