|
| 1 | Supply and fixing in Repair bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete. |
| 2 | Supply and fixing in Repair stop cock brass/ cast copper alloy 15 mm dia with crutch or butterfly handle, screwed down high pressure complete. |
| 3 | Supply and fixing in Repair 15 mm dia angle cock/ angle valve chromium plated with capstain head screwed down high pressure complete. |
| 4 | S & F Stop Valve Concealed Type in repair 15 mm Cast Copper Alloy Capstain head, Chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed complete. |
| 5 | S&F Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. |
| 6 | S & F in repair SS Flap Toilet Paper Holder and fixed complete all as specified. |
| 7 | S & F in repair 10 ltr capacity PVC low level flushing cistern, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed all as specified. |
| 8 | S & F in repair Flush Pipe of polyethylene/ PVC, 32 mm dia, for low level flushing cistern and fixed all as specified. |
| 9 | S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and stainless steel hinging device and fixed all as specified. |
| 10 | S & F in repairs Tublar towel rail 24\\" long , 20 mm dia, Brass Chromium plated complete all as specified. |
| 11 | Supply and fixing in repair Waste Coupling 32 mm , brass chromium plated for glazed ware sinks, basins,sinks etc. with long screwed shanks and fly-nuts, flange end bedded with teflon tape & M-Seal. complete all as specified and directed by the Engr-In-Charge. |
| 12 | Supply and fixing in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete. |
| 13 | Description all as per serial No 12 here-in-before but 15 mm size complete |
| 14 | S & F in repairs centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified. |
| 15 | S&F in repair Chromium plated Wall Mixer with Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator, connecting legs & wall flange etc 15mm bore fixed in repair complete all as directed. |
| 16 | S&F in repair Vitreous china WHB , white, flat black, size 550x400mm including 32mm CP waste coupling, waste pipe, fixing brackets complete all as directed. |
| 17 | M&L for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed. |
| 18 | S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete. |
| 19 | S&F 15 mm in Repair fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts all as specified and directed by Engr-in-charge. |
| 20 | Description all as per serial No 19 here-in-before but with Swan Neck 15 mm size complete. |
| 21 | Supply & fixed, in repair, 15mm bore stainless steel jet spray with 1.00meter PVC tube fixed in repair complete all as directed. |
| 22 | S&F 15mm bore CP health faucet with 1.0 M long flexible tube chrome braided with wall hook complete all as directed fixed in repair. |
| 23 | S&F, Chromium Plated steel soap dish fixed in repair complete all as directed. |
| 24 | S&F in repairs CP bottle trap 32 mm size for WHB complete all as specified and as directed (As per sample) |
| 25 | Supply & fixed, in repair, Two way chromium plated bib cock 15mm dia with wall flange complete all as directed. |
| 26 | S & F in repairs Stainless steel curtain Rod Fancy type 25 mm Bore and 1mm thickness with fixing brackets, end feneals etc. as approved by Engr-in-Charge |
| 27 | S & F in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified |
| 28 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 29 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed. |
| 30 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed |
| 31 | Taking down shutter of any description n.exc 1 sqm each complete all as specified & directed. |
| 32 | S&F Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed. |
| 33 | S&F Pressed steel frame of 165 x 60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed. |
| 34 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed. |
| 35 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 etc complete all as specified and directed. |
| 36 | S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 37 | S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 38 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 39 | M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter brown, minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with WPC bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. |
| 40 | M&L for box type Steel window factory made with side hung shutter including MS hinges with steel handle and steel hook & eye complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 41 | M&L for box type Steel window factory made with side hung shutter including MS hinges with steel handle and steel hook & eye complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 42 | M&L for box type Steel ventilators with top hung shutter including hinges, steel hook & eye complete all as specified and directed |
| 43 | S&F mild steel bends, straps, hold fast, wall ties, hooks for hanging fans, angle cleats and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified. |
| 44 | M & L PCC 1:3:6 type C1 using (20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts etc complete all as specified and directed |
| 45 | M & L for Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed |
| 46 | S & F in repairs MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified |
| 47 | S & F in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified. |
| 48 | S & F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified. |
| 49 | Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified. |
| 50 | Description all as per serial item No 49 herein before but 150 mm long |
| 51 | S & F in repairs 125 mm long Aluminium handles, fabricated type, anodised and fixed complete all as specified |
| 52 | S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified. |
| 53 | S& F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed |
| 54 | S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified. |
| 55 | S&F in repair 100mm long mild steel pressed handles for projection type steel window stove enamelled black complete all as specified and directed. |
| 56 | S&F double action spring hinge 100mm long mild steel with steel wire spring stove enameled black all as directed. |
| 57 | S& F in repair double action floor spring Hydraulically regulated made up of Min 1.25 mm thick aluminium alloy sheet foundation Box Main Body with stainless steel cover governing Pivot made of brass, other parts made of mild heavy duty and fixed etc. |
| 58 | S & F in repair fancy type frameless Looking Mirror 5 mm thick size n exc 2 Sqm fixed to wall with SS Stud pins all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity. |
| 60 | S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 1000 litre capacity. |
| 61 | S&F in repair Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified after taking down of existing unserviceable pipe fixed in repair |
| 62 | S&F in repair Cast iron soil, waste and vent pipe, 75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified |
| 63 | S&F for Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed |
| 64 | S&F Stack clamps made out of 25mm X 5 mm flat iron and 16mm dia round iron stays, for fixing 100 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed |
| 65 | S&F cast iron Bends (any radius) 100mm pipe,diminishing pieces or tapers (larger bore measured) with oval access doors |
| 66 | S&F cast iron Bends (any radius) 75mm pipe, diminishing pieces of tapers (large bore measured) |
| 67 | S&F cast iron 100mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors. |
| 68 | S&F cast iron 75mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches. |
| 69 | Taking up or down GI steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. |
| 70 | Taking up or down GI steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 71 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down existing steel tubing pipe complete all as directed. |
| 72 | Supply and Fixing, Brass thread Elbow complete all as specified & directed. |
| 73 | Supply and Fixing, Brass Thread Tee complete all as specified & directed. |
| 74 | Supply and Fixing, Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified & directed. |
| 75 | S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed. |
| 76 | S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed. |
| 77 | S&F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore dia of pipe complete all as specified and directed. |
| 78 | S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed. |
| 79 | S&F glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed |
| 80 | S&F cornner glass shelf of size 300mmX300mm shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws. |
| 81 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 82 | Dismentling floor hearth or wall tiling including cement motor bedding (But not backing), removing inserviceable tiles or stone and rubbish off the premises |
| 83 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 84 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 75 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 85 | M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1 :6 complete all as specified and directed. |
| 86 | M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 20mm thick screed bed in CM 1 :6 complete all as specified and directed. |
| 87 | All as per item No 87 above but vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 88 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x600mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in tile adhesive/cement mortar and pointed in coloured grout to match all as directed. |
| 89 | Demolition of brick work / stone boulder masonry built in cement mortar. |
| 90 | M & L brick work with subclass 'B' bricks(old size), Straight or curved on plan exc 6m mean radius,built in 1:4 in cement mortar all as Specified and Directed |
| 91 | M & L brick work with subclass 'B' bricks(old size), Straight or curved on plan to any radius in half bricks thick walls built in 1:4 in cement mortar all as Specified and Directed |
| 92 | Use and waste of form work to soffits of supended slabs such as roof slabs, floor slabs, landings and similar works n.exc 200mm thick (Horizonal or slopping) for rough finished surface of concrete. |
| 93 | M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 94 | M&L for MS TMT bars, 6mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W or Fe 290 (as in rungs/handles). |
| 95 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 96 | Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 97 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement up to 10.5m height complete all as specified and directed |
| 98 | M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed |
| 99 | M&L for Rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed. |
| 100 | M&L for 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement uisng 38mm width Glass strips 3 mm thick including demolition of existing old cement concrete, complete all as specified and directed. Note :- PVC plastic strip/ glass strips shall be measured and paid separately |
| 101 | Supply Glass dividing strips,3mm thick and 38mm width of strips complete all as specified. |
| 102 | M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of ant tint over a priming coat on wall, chajjas, facia etc with mechanical spray mechine complete all as directed. Note : The work will be carried out upto a height of 7.5 m. |
| 103 | M&L for Prepration of new surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. |
| 104 | M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed. |
| 105 | M&L for Preparation of old plastered/unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather exterior emulsion paint (Apex paint/weather proof of Berger) on walls complete all as specified and directed. |
| 106 | M&L for Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried up to a height of 7.50m high) |
| 107 | M&L for Prepration of scrapped surface of wall / ceilling and applying 1 to ½ mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed. |
| 108 | M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete. |
| 109 | M&L for preparation of old painted wooden surface of wood and wood based material over 10cm in width or girth of any description and applying one coat of synthetic enamel paint all as specified and directed. |
| 110 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 111 | M&L for preparation of new or previously untreated surfaces of steel of any description, not exc 10cm in width or girth when unconnected with other painting and apply one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 112 | Supply and fixing bib cock PTMT standard 15 mm dia with capastan head complete male or female as reqd and as directed by Engineer Incharge, Make 'Prayag' or equivalent |
| 113 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed. |
| 114 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed. |
| 115 | S&F PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed. |
| 116 | S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed. |
| 117 | S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 118 | S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 119 | S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified. Make- CERA or Equivalent. |
| 120 | M & L in repair Plain fillets 2nd Class hardwood cross sectional area not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified. |
| 121 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified. |
| 122 | S & F 3 to 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified. |
| 123 | M & L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed all as specified. |
| 124 | S&F complete Veta Washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed. |
| 125 | M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring finishing the surfaces even & smooth without using extra cement. |
| 126 | Demolition of Cement concrete of any description in any position not otherwise specially provided for Sunken floor etc complete all as specified and directed |
| 127 | Repair to steel Door, Window and Ventilators by spot or running welding including repair of MS Butt Hinges any size to steel chowkets by bringing welding plant at site complete |
| 128 | M&L for Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with Kmnou solution & drying it again with vaccume cleaner. |
| 129 | Description all as per serial item No 126 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr |
| 130 | M&L for 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed. |
| 131 | M&L for 4mm thick E-board false ceiling (Classic) tile size 600mm X 600mm as in ceiling fixed on existing grid including straightening the grid and taking dowan carefully old board complete all as specified & directed. |
| 132 | M&L for Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed. |
| 133 | Taking down steel window shutter n.exc 1sqm and refixing in the same opening after replacement of broken hinges & wire mesh including welding,reveting , grinding, painting etc each complete all as specified and directed Note: -(Wire mesh and flat iron strip shall be measured and paid separately under respective items of this BOQ). |
| 134 | S& F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required fixed in repair complete all as specified and directed |
| 135 | Demolition carefully old Chimny incl RCC cover over double storey RCC roof etc in any position, carefully removing demolished material from roof, making good existing roof surface including water proofing treatment and removal of debris out side MD land complete all as specified and directed. |
| 136 | M&L, for PCC 1:2:4 , type B0 ( using 12.5mm graded crushed stone aggregates) as in roof padding in chimni portion, laid in proper slope and finished fair and even,complete all as specified and directed. |
| 137 | M&L for Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.50Kg/Sqm, and laid 3mm thick APP modified five layer polymeric membrane , minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instrutions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil from defence premises, complete all as specified and directed. Make: STP AQUA SHIELD , Sika, Fosroc or as approved by GE. Note :-(1) Work shall be executed by authorised applicator of manufacturer and upto roof height of double storied building.(2) Work shall be carried out in patches 1 Sqm to 3 Sqm at different bldgs on Chimny portion. |
| 138 | M& L for machine cut kota stone slab flooring 18-20mm thick laid over 20mm thk cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 139 | M& L for machine cut kota stone slab flooring 18-20mm thick laid over 10mm thk rendering in CM 1:4 as base on vertical surface laind and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 140 | M&L for fibre reinforced liquid applied Elastomeric waterproofing membrane PU-Acrylic Hybrid Polymer on door/window chajjas, Roof, wall etc by scrapping of damaged portion and preparing the surfaces by 15 mm thick rendering in CM 1:3 and finished even and smooth using extra cement over concrete surfaces and benching including weathering slightely rounded or chamfered angles and applying a coat of PU (01 ltr/sqm appyling area) over a coat of priming coat of the same component all as directed by Engr-in-charge (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). |
| 141 | M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping, benching, steps, PCC gola, holdfast etc including weathering sliglitely rounded or chamfered including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed. |
| 142 | Supply and fixing in repairs MS powder coated peg set of six complete all as specified. |
| 143 | S & F ball bearing runners 45 mm Tele-scopic (KTS-20) full extension load capacity of 50 kgs complete all as specified and directed. Make : Hettich, Hafele, Butterfly |
| 144 | S&F SS handles fancy type 100mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. |
| 145 | S&F Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised of flaps (When open) in 30mm fixed in repair complete all as specified and directed. |
| 146 | S & F Magnetic catcher suitable for cup board shutter fixed with screws in bath cabinet or similar situations complete all as specified and directed. |
| 147 | S&F Chromium plated stainless steel wire basket (storage, cup and saucer, Plate, cutlery, Bottle pull out, Grain Trolley) pull out type Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 148 | M&L in repair for 18/19mm thick prelaminated colour WPC board minimum density of 600 kg/cum for kitchen cabinet shutter/drawer front, cup board shutter, frame etc complete all as specified and directed. |
| 149 | M&L in repair for 18/19mm thick WPC board minimum density of 600 kg/cum for kitchen cabinet shutter/drawer front, cup board shutter, frame etc complete all as specified and directed. |
| 150 | Attending complaints like leakge of taps, angle valve stop coks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratinsgs, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor.(ii) Material will provided by seggregation of complaints (72 Hours/3 days/15 days/30 days) to the contractor and will be seperatly measured & paid as per item below.(iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor or high authority rep in writing.(iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (v) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill. |
| 151 | Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor.Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor.(ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor.(iii) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (iv) If any complaint not attended by contractor with in 48 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill. |
| 152 | Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor.Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor.(ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ).(iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor.(iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I (V) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.150 per complaint.Amount will be deducted from running payments/Final bill. |
| 153 | Attending complaints related to Cleaning of blocked WC seat of pedestal/squatt pattern, trap of bathroom and kitchen upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n. exec 300m and burning the same in pits complete all as specified and directed by Engr-in -charge. T&P for attending the job will be provided by the contractor.Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor.(ii) Material will provided by department through maintanace cell and neccessary salvage/unused material deposit back to complaint cell incharge/JE(Civ).(iii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor.(iv) The area/Location of of Job will be all MD and OTM accn in AOR of AGE B/R-I. (V) If any complaint not attended by contractor with in 24 hours he will be liable for penalty/recovery of Rs.100 per complaint.Amount will be deducted from running payments/Final bill. Please Enable Macros to View BoQ information |
