|
| 1 | Sch 'A' |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for. |
| 3 | Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as specified & directed. |
| 4 | M&L rendering 15mm thick on walls as well as on sunken floor in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule). |
| 5 | M&L for applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl fibre felt & cleaning surfaces complete all as specified & directed. |
| 6 | M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded aggregate)as in foundation filling and mass concrete complete all as specified & directed. |
| 7 | Dismantling brick tiles or terracing tiles, single layers on roof complete all as specified & directed. |
| 8 | Demolition mud phuska in roofs any thickness incl platering and leeping(whether full thickness removed or only a part thereof) complete all as specified & directed. |
| 9 | M&L for applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl cleaning surfaces complete all as specified & directed. |
| 10 | M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) land on primed surfaces by forced application APP based polymeric membrance complete all as specified & directed. |
| 11 | M & L 40 mm thick brick tiles laid on 15 mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement complete all as specified & directed. |
| 12 | M & L 40 mm thick brick tiles laid on 15 mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement complete all as specified & directed but except tile. |
| 13 | M&L 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with water proofing compound on roof slab and finishing the surface finished even and smooth without using extra cement complete all as specified & directed. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule). |
| 14 | M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate average thickness 50mm as in roof padding incl mixing water proofing compound (Dr. Fixit) or equivalent make specified in Appx 'B' as per manufacturers instruction complete all as specified and as directed. Note. water proofing liquid shall be measured and paid seperately) |
| 15 | Supply only Iiquid water proofing compound. |
| 16 | M&L for providing, cement concrete 1:2:4 type B-1 using 20mm graded stone agg in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed. |
| 17 | M&L for 15mm thick screed bed or bedding layer of CM (1:3) for laying floor finishes completed all as specified and directed. |
| 18 | Material & Labour for PolyUrethane Coating based waterproofing and heat reflecting system having following key performance properties:(a) UV resistant and resistant to yellowing and weathering(b) Highly elastic and crack bridging(c) Non-toxic and VOC compliant water based coating(d) One component ready to use(e) Excellent adhesion on porous and non porous substrates(f) Seamless waterproofing membrane (g) Water vapour permeable Note : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.Procedure : Providing and applying primer over the prepared surface with Homeshield PU ROOFKOT or Equivalent. First coat: Material : Water = 1:1 by weightTotal thickness: ̴̴ 0.4 – 0.5 mmConsumption: 0.25 kg/sqm.Reinforcement: Glass fiber meshSecond coat: Homeshield PU ROOFKOT or Equivalent.Consumption : 0.5 kg/sqm.Third coat: Homeshield PU ROOFKOT or Equivalent.Consumption: 0.5 kg/sqm. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 20 | M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 21 | All as per item No 9 above but for work on vertical surfaces such as skirting risers to steps etc |
| 22 | M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 23 | Taking down steel water tubing of 15 mm dia bore incl connection. |
| 24 | Taking down steel water tubing of 40 mm dia bore incl connection. |
| 25 | Taking down steel water tubing of 20 mm dia bore incl connection. |
| 26 | Mild steel GI tubing 15 mm bore medium weight fixed to walls and floor complete all as specified and as directed.. |
| 27 | S&F mild steel GI tubing 20 mm bore medium weight fixed to walls and floor complete all as specified and as directed. |
| 28 | S&F mild steel GI tubing 40mm bore medium weight fixed to walls and floor as in spout pipe complete all as specified and directed. |
| 29 | S&F in repairs vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand as directed fixed in repairs complete all as specified & directed. |
| 30 | S&F Pillar taps, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified & directed. |
| 31 | S&F in repairs 25 mm dia mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified and directed. |
| 32 | Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, complete all as specified & directed. |
| 33 | Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe,complete all as specified & directed. |
| 34 | Supply and fix in repair 10 ltrs capacity PVC symphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified & directed. |
| 35 | S&F PVC connection 15 mm dia with PTMT nuts of length 450 mm as specified & directed. |
| 36 | Supply and fix in repair Bib cock 15mm with flange, chrome plated fixed as in repair complete all as specified and directed. |
| 37 | Supply and fixing in repair Angular/ stop cock 15mm with wall flange chrome plated, fixed in repairs complete all as specified and directed. |
| 38 | Supply and fixing in repair Concealed stop cock, 15mm chrome plated long shank and cup complete all as specified and directed. |
| 39 | S & F chromium plated fancy type shower rose with arm 125 mm size including fixing to steel pipe or union complete all as specified and directed. |
| 40 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 41 | S&F Grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed. |
| 42 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 43 | S & F in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed |
| 44 | Ditto all as per item No 42 Above but 40mm dia complete all as specified and directed |
| 45 | S&F in repair 32 mm bore PVC waste pipe suitable for WHB or Sinks etc complete all as specified and directed. |
| 46 | S&F in repair 40 mm bore PVC waste pipe suitable for WHB or Sinks etc complete all as specified and directed. |
| 47 | S&F in repair tubular towel rail brass chromium plated 20mm dia complete all as specified and directed. |
| 48 | S&F in repair soap dish of chromium plated brass screw fixed to wall complete all as specified and directed. |
| 49 | Taking down chowkat with shutter (without taking off shutter from frame) n exc 1.5 sqm each all as specified and directed. |
| 50 | S&F Solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in operating as per specifications given in SSR 2020 (Part-II) complete all as specified and directed. |
| 51 | S&F Factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail , lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed. |
| 52 | S&F mild steel, cold rolled, medium weight butt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed. |
| 53 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed of size 150 mm long as specified and directed. |
| 54 | S&F Aluminium handle Extruded aluminium alloy handles fabricated type anodised of size 150 mm long as specified and directed. |
| 55 | Dismantling water tanks of capacity 250 to 500 ltr complete all as specified and directed. |
| 56 | S & F rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank as specified and directed.. |
| 57 | Ball brass valves 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete as specified and directed. |
| 58 | Dismantling of cast iron soil waste and drain pipe, 75/100 mm dia, jointed in cement mortar or lead and taking out of trenches, if required |
| 59 | S&F PVC (SWR) 75 mm pipes single socketed in any length with rubber ring joints fixed to walls complete as specified and directed. |
| 60 | S&F PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls. |
| 61 | M&L, 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete as specified and directed. |
| 62 | S&F PVC 75 mm (SWR) bends any radius complete as specified and directed. |
| 63 | Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specfied and directed. |
| 64 | M&L for RCC (Nominal Mix) type B0 1:2:4 (12.5 mm graded aggregate) as in roofs, beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work complete as specified and directed. |
| 65 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed. |
| 66 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc all as specified & directed. |
| 67 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specfied and directed. |
| 68 | M&L 75 mm thick PCC 1:2:4 type B-2 (with using 40mm graded stone aggregate) finished surface even and smooth as in floor in alternate panel complete all as specfied and directed. |
| 69 | Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed from walls fins facia etc up to 7.00 m ht incl removing all shurbs,vegetation,trees around the area for working space etc. |
| 70 | M&L rendering 15 mm thick on brick work or concrete surfaces in cm 1:4 rendering to be finished even smooth without using extra cement as on walls/fins facia /chajjas etc any height complete all as specified & directed . |
| 71 | M&L preparing new plaster surfaces of walls, Roof, facia, chajja etc of any height and applying two coats of cement base paint in with fibre brushes complete all as specified and directed . |
| 72 | M&L rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 rendering to be finished even and smooth without using extra cement complete all as specified & directed etc any height. |
| 73 | M&L preparing new plaster surfaces of walls applying two coats of oil emulsion distemper with fibre brushes complete all as specified and directed as approved by GE. |
| 74 | M&L rendering 5 mm thick on ceiling surfaces or concrete surfaces in cm 1:3 rendering to be finished even and smooth without using extra cement complete all as specified & directed etc any height. |
| 75 | M & L Preparation of new plastered surfaces of Ceiling and applying three coat of white wash on Ceiling complete as specified and directed. |
| 76 | M&L for preparation of old decorated plastered or un-plastered surfaces of ceiling of any height including cornices, pilasters by brooming down with steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash on ceiling all as specified and directed. |
| 77 | M&L for preparation of old decorated plastered or un-plastered surfaces of walls of any height including cornices, pilasters by brooming down with steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of White wash on walls all as specified and directed. |
| 78 | Preparation of old decorated plastered or un-plastered surfaces of walls of any height including cornices, pilasters by brooming down with steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc making good holes cracks with wall putty , rubbing down with sand paper to make the surfaces even and smooth and applying one coat of distemper oil emulsion white or tinted, all as specified and as directed. |
| 79 | M&L preparation of old plaster surface of walls of any height ncluding brooming down or steel wire brushing, scrapping down smokes soots, moulds, moss and efforescent salts and trading oil and greasy spots removing of nails making good holes, cracks with wall putty/plaster of pairs and applying one coat of cement base paint in camouflage pattern including scaffolding complete all as specified and directed. |
| 80 | M&L Complete removal & preparation of old plaster surface of walls of any height including brooming down or steel wire brushing, scrapping down smokes soots, moulds, moss and efforescent salts and trading oil and greasy spots removing of nails making good holes, cracks with wall putty/plaster of pairs and applying two coats of cement base paint complete all as specified and directed. |
| 81 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 82 | M&L for preparation of old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 83 | M&L for preparation of old plastered or un-plastered surfaces of walls / ceiling including cornices, pilasters by brooming down with steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying two coat of exterior / interiour emulison paint/ weather shield paint (Apex) over a coat of water based primer on walls and ceiling all as specified and as directed.Make approved by GE. Please Enable Macros to View BoQ information |
