|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 2 | Filing of carted earth |
| 3 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. |
| 4 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 5 | Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 6 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 7 | Class 150 brick work in 1:6 Cement and coarse sand in FM 2.25 mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I. |
| 8 | Providing and laying damp-proof course 40 mm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size). |
| 9 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 10 | Same as in item No. 6 above but in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand). |
| 11 | Same as in item no. 9 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. |
| 13 | Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 14 | All works upto plinth level |
| 15 | R.c.c. Work in Footing |
| 16 | R.c.c. Work in Column |
| 17 | R.c.c. Work in Plinth Beam |
| 18 | Above plinth lvl. |
| 19 | R.C.C. work in Beam |
| 20 | R.C.C. work in Column |
| 21 | R.C.C. work in Slab |
| 22 | R.C.C. work in Lintel |
| 23 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick (when not included in over all rates) brought to require shape as necessary and also including being for proper completion of work and including supply of all steel and wastage & over lapping & hooks. |
| 24 | Upto plinth level |
| 25 | Above plinth lvl. |
| 26 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand. F.M. 2.25 |
| 27 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. F.M. 2.25 |
| 28 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, .hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete |
| 29 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick |
| 30 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 31 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 32 | Supply & fixing of kota stone in flooring 25 mm thick & joint filled with 1:2 cement & coarse sand with approved colouring materials to be given an even shade with 12mm base coat (bedding) of 1:2 cement & coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials. labour , tools & plants etc required for proper completion of the work. |
| 33 | Supply & fixing 10 to 12 mm of kota stone tiles in Skirting or dado laid with 1:2 Cement & approved coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools & plants etc required for proper completion of the work. |
| 34 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, Colour Aprroved as per Architect in charge |
| 35 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacturer in desired shade to give an even shade complete on new work ( two +one more coats ) over and including priming coat. |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 38 | Providing & fixing ISI marked flush door shutters conforming IS: 2202 non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (a) 35mm thick |
| 39 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 40 | Fabrication of hold fast for door chaukhats and windows. |
| 41 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 42 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 43 | M.S. grill for window |
| 44 | Providing & fixing mosquito proof heavy quality iron wire gauge of expended metal heavy quality over windows. |
| 45 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) 35mm thick Second class teak wood. |
| 46 | Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950 |
| 47 | Painting or varnishing on wood work in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950 |
| 48 | Fixing of D/W/V Chaukhats. |
| 49 | Window |
| 50 | Ventilator |
| 51 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (a) 300mm x 16mm. |
| 52 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete |
| 53 | (a) 250 mm x 10mm |
| 54 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (a) 100 mm |
| 55 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 56 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. (0.63 mm thick with zinc coating not less than 275 gm/m²). |
| 57 | Supplying of 8mm Cross Link Foam (Aflex) with one side Aluminium Foil Insulation as per Archiect in Charge |
| 58 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 59 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (I) 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 60 | Supply and fixing rolling sutters of approved make made of 80*125 mm (3\\"*18 gauge) cold rolled MS Lath inter locked through their entire length and joined together at the end by locks and mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operationcomplete including the cost of top cover and spring. |
| 61 | Providing and fixing ball bearing for rolling shutters . |
| 62 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 63 | (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 64 | (b) Foundations, footings, bases of columns, etc. for mass concrete |
| 65 | (c) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 66 | (d) Suspended floors, roofs, landings, balconies and access platform. |
| 67 | SANITARY INSTALLATIONS & C.P FITTINGS |
| 68 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 69 | W.C. pan with ISI marked black solid plastic seat and lid |
| 70 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. |
| 71 | a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 72 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 73 | Semi rigid pipe |
| 74 | 32 mm dia |
| 75 | 40 mm dia |
| 76 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 77 | Providing and fixing white vitreous china flat back half stall urinal of size 430*260*350 with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: |
| 78 | Range of Single half stall urinals with 5 litre PV.C. automatic flushing cistern. |
| 79 | CP Brass fittings |
| 80 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 81 | 45 cm length |
| 82 | 15 mm nominal bore |
| 83 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 84 | a) 15 mm nominal bore |
| 85 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 86 | a) 15 mm nominal bore |
| 87 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 88 | a) 15 mm nominal bore |
| 89 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. |
| 90 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 91 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 92 | P.V.C. SOIL/PVC WASTE & VENT PIPES AND FITTINGS |
| 93 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) |
| 94 | 100 /75 mm dia |
| 95 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 96 | 110 mm |
| 97 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. |
| 98 | Bend 87.5 degree |
| 99 | 110 mm Bend |
| 100 | Shoe (Plain) |
| 101 | 110 mm Shoe |
| 102 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 103 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 104 | 110 mm |
| 105 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. |
| 106 | INTERNAL & EXTERNAL WATER SUPPLY WORKS |
| 107 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 108 | Concealed work including cutting chases and making good the walls etc. |
| 109 | 20mm dia nominal outer dia pipes |
| 110 | 25mm dia nominal outer dia pipes |
| 111 | 32mm dia nominal outer dia pipes |
| 112 | Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). |
| 113 | Internal work-Exposed on wall |
| 114 | 25mm dia nominal bore |
| 115 | 32mm dia nominal bore |
| 116 | 40mm dia nominal bore |
| 117 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. |
| 118 | 25mm dia nominal bore |
| 119 | 32mm dia nominal bore |
| 120 | 40mm dia nominal bore |
| 121 | Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work). |
| 122 | 25mm dia nominal bore |
| 123 | 32mm dia nominal bore |
| 124 | 40mm dia nominal bore |
| 125 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 126 | 25mm dia nominal bore |
| 127 | 32mm dia nominal bore |
| 128 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. |
| 129 | Capcity in Per Liters |
| 130 | Providing and fixing brass stop cock of approved quality. |
| 131 | b) 20 mm nominal bore |
| 132 | SEWERAGE SYSTEM |
| 133 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. |
| 134 | All kinds of soil |
| 135 | Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. |
| 136 | Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 137 | 100mm dia SW pipe |
| 138 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design |
| 139 | 100mm dia SW pipe |
| 140 | Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. |
| 141 | 150 mm. dia. RCC Pipes |
| 142 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design |
| 143 | 150 mm. dia. RCC Pipes |
| 144 | Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 145 | 150 x 100 mm size P type |
| 146 | With Sewer bricks conforming to IS : 4885 |
| 147 | SANITARY INSTALLATIONS & C.P FITTINGS |
| 148 | Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN Conventional system for soil and waste water pipes conforming to (HSN CODE: 3917) Type B including jointing with seal ring. (i) Double socketed pipes. |
| 149 | a) 110mm dia P.V.C. pipe |
| 150 | b) 90mm dia P.V.C. pipe |
| 151 | Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) |
| 152 | P-Trap type Floor Trap 110 x 90 mm |
| 153 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 154 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. |
| 155 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 156 | Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 157 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 158 | Class 150 brick work in 1:6 Cement and coarse sand in FM 2.25 mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E / I. |
| 159 | Providing and laying damp-proof course 40mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 160 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 161 | Same as in item No. 6 above but in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand). |
| 162 | Same as in item no. 9 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 163 | Mild steel or iron in plan work shch as reinforced concrete or reinforced brick (when not included in over all rates) brought to require shape as necessary and also including being for proper completion of work and including supply of all steel and wastage & over lapping & hooks.(PWD-504) |
| 164 | Upto plinth level |
| 165 | Above plinth lvl. |
| 166 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand. F.M. 2.25 |
| 167 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1)1 cement : 6 coarse sand. F.M. 2.25 |
| 168 | Ceramic tiles in flooring laid on a bed of 10 mm cement mortar 1:3 (1 cement : 3 coarse sand) finished with flush poinnting with white cement slurry. |
| 169 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 170 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 171 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 172 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). |
| 173 | Distempering with oil bound washable distemper of approved brand and manufacturer in desired shade to give an even shade complete on new work ( two +one more coats ) over and including priming coat. |
| 174 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 175 | Providing & fixing ISI marked flush door shutters conforming IS: 2202 non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (a) 35mm thick |
| 176 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 177 | Fabrication of hold fast for door chaukhats and windows. |
| 178 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 179 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 180 | M.S. grill for window |
| 181 | Providing & fixing mosquito proof heavy quality iron wire gauge of expended metal heavy quality over windows. |
| 182 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) 35mm thick Second class teak wood. |
| 183 | Painting or varnishing on wood work in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950 |
| 184 | Fixing of D/W/V Chaukhats. |
| 185 | Window |
| 186 | Ventilator |
| 187 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (a) 300mm x 16mm. |
| 188 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete |
| 189 | (a) 250 mm x 10mm |
| 190 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (a) 100 mm |
| 191 | S/F of 4.0 mm thick glass panes for window shutter incluing supply of puty, brand & spring all material labour T&p etc. |
| 192 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 193 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 194 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 195 | (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 196 | (b) Foundations, footings, bases of columns, etc. for mass concrete |
| 197 | (c) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 198 | (d) Suspended floors, roofs, landings, balconies and access platform. |
| 199 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 200 | W.C. pan with ISI marked black solid plastic seat and lid |
| 201 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. |
| 202 | a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 203 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 204 | Semi rigid pipe |
| 205 | 40 mm dia |
| 206 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 207 | Providing and fixing white vitreous china flat back half stall urinal of size 430x260x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: |
| 208 | Range of Single half stall urinals with 5 litre PV.C. automatic flushing cistern. |
| 209 | CP Brass fittings |
| 210 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 211 | 45 cm length |
| 212 | 15 mm nominal bore |
| 213 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 214 | a) 15 mm nominal bore |
| 215 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 216 | a) 15 mm nominal bore |
| 217 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 218 | a) 15 mm nominal bore |
| 219 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. |
| 220 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 221 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 222 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) |
| 223 | 100 /75 mm dia |
| 224 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. |
| 225 | 110 mm |
| 226 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 227 | Concealed work including cutting chases and making good the walls etc. |
| 228 | 20mm dia nominal outer dia pipes |
| 229 | 25mm dia nominal outer dia pipes |
| 230 | 32mm dia nominal outer dia pipes |
| 231 | Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). |
| 232 | Internal work-Exposed on wall |
| 233 | 25mm dia nominal bore |
| 234 | Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. |
| 235 | 25mm dia nominal bore |
| 236 | Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work). |
| 237 | 25mm dia nominal bore |
| 238 | 32mm dia nominal bore |
| 239 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 240 | 25mm dia nominal bore |
| 241 | 32mm dia nominal bore |
| 242 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. |
| 243 | Capcity in Per Liters |
| 244 | Providing and fixing brass stop cock of approved quality. |
| 245 | b) 20 mm nominal bore |
| 246 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. |
| 247 | All kinds of soil |
| 248 | Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. |
| 249 | Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 250 | 100mm dia SW pipe |
| 251 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design |
| 252 | 100mm dia SW pipe |
| 253 | Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. |
| 254 | 150 mm. dia. RCC Pipes |
| 255 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design |
| 256 | 150 mm. dia. RCC Pipes |
| 257 | Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 258 | 150 x 100 mm size P type |
| 259 | With Sewer bricks conforming to IS : 4885 |
| 260 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design |
| 261 | Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). |
| 262 | With FPS bricks of class designation 75 |
| 263 | Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN Conventional system for soil and waste water pipes conforming to (HSN CODE: 3917) Type B including jointing with seal ring. (i) Double socketed pipes. |
| 264 | a) 110mm dia P.V.C. pipe |
| 265 | b) 90mm dia P.V.C. pipe |
| 266 | Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) |
| 267 | P-Trap type Floor Trap 110 x 90 mm |
| 268 | SEPTIC TANK & SOAK PIT |
| 269 | Size :- Length = 2.30 M. Width = 1.10 M Total Depth =1.30 M |
| 270 | Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. |
| 271 | In all kind of soil upto 1.5m depth |
| 272 | In all kind of soil upto 1.5m to 3.0m. depth |
| 273 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregate 20mm nominal size) |
| 274 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) including centering and shuttering and reinforcement. |
| 275 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) |
| 276 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 277 | 15mm cement plaster on rough side of mix 1:4 (1 cement : 4 coarse sand) |
| 278 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. |
| 279 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. |
| 280 | Providing & fixing 75mm dia vent pipes. |
| 281 | Providing & fixing of 75mm dia cast iron terminal guard. |
| 282 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. |
| 283 | M.D. -10- Circular shape 500mm internal diameter |
| 284 | M.D. -2.5- Circular shape 450mm internal diameter |
| 285 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. |
| 286 | With F.P.S. bricks Please Enable Macros to View BoQ information |
