|
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.omplete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 4 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets omplete all as specified and directed. |
| 5 | S&F aluminium anodised snap grid (Size of grid 605 x 605mm) frame work for false ceiling including all materials required for fixing complete all as specified and directed. |
| 6 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 7 | M&L for 4mm thick armstrong ceiling boards (600x600)mm fixed or laid inserted to timber/GI/Aluminium frame work with screw in ceiling complete all as specified and directed |
| 8 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed |
| 9 | M&L for Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes /tiles etc complete all as specified and directed |
| 10 | S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 11 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified. and directed. |
| 12 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for 10mm thick screed bed in CM (14) on backing coat of wall tiles.complete all as specified. and directed. |
| 15 | S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. and directed. |
| 16 | Providing and applying 1 mm thick putty over plastered surface to prepare the surface even and smooth complete all as specified. and directed. |
| 17 | M&L for of new plastered surfaces of wall and applying two coat of oil bound distemper over 1 mm thick wall care putty. Complete all as specified and directed. (Note: 1mm thick putty will be paid separately) complete all as specified. and directed. |
| 18 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified. and directed. |
| 19 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)complete all as specified. and directed. |
| 20 | S&F aluminium door/ window/ventilator/partition shutters and frame, made out of extruded power coated aluminium sections weighing 0.55kg/m, with sliding or openable shutters including frame and necessary joining cleats, glazing clips, rubber packing, power coated aluminium snap beading, screws, channels etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay and handles connected items wtih and including star lock (star lock used for each sliding glass shutter). complete all as specified and directed. Notes:- (i) Minimum thickness of powder coating shall be not less than 15 micron for widows & ventilators and 25 microns for doors & partions. (ii) Incl Rubber beading. (iii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE. (iv) Incl 4.00mm thick glass for door/windows/venitlator/partions. (v) Incl 4mm thick frosed glass used for ventilator. (vi) Incl Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm for gauged shutter. |
| 21 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty nin square n exc 0.5 sqm in each pane complete all as specified. and directed. |
| 22 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified. and directed. |
| 23 | Taking down Chowkats or frames with shutter exc 1.5 sq. m but n exc 4 sq m each.complete all as specified. and directed. |
| 24 | S&F Pressed steel frames size (105x60)mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified. and directed. |
| 25 | M&L for Precast reinforced cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required complete all as specified. and directed. |
| 26 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 27 | S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified. and directed. |
| 28 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.complete all as specified. and directed. |
| 29 | S&F Aluminium handles 150mm size, cast type, anodised complete all as specified. and directed. |
| 30 | S&F in repair overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor.complete all as specified. and directed. |
| 31 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed |
| 32 | Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primercomplete all as specified. and directed. |
| 33 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.complete all as specified. and directed. |
| 34 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and edge moulding incl 15mm thick screed bed in CM 1:6.complete all as specified and directed. |
| 35 | Dismantling timber framed work scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 36 | S&F Fe-290 (Gde E-165) MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, nut bolts, MS plate etc complete all as specified and directed |
| 37 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 38 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in plinth protection complete all as specified and directed |
| 39 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A.complete all as specified and directed |
| 40 | Demolition of Brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 41 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified and directed |
| 42 | Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge. |
| 43 | Material & labour point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant conforming to IS 694-1990 PVC insulated, unsheathed copper conductor cable FRLSH in and including PVC concealed conduit of 20 mm die or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings : One light point controlled by one, one way switch 05 / 06 Amps. |
| 44 | All as per item No 43 here- in- before but One fan point controlled by one, one way switch 05 / 06 Amps. |
| 45 | All as per item No 43 here- in- before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 46 | All as per item No 43 here- in- before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 47 | All as per serial item No 43 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 48 | Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge |
| 49 | Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge . |
| 50 | Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. |
| 51 | Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge |
| 52 | Supply and fixing steped type electronic fan regulator flush type suitable for BLDC fans on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed by Engineer-in-Charge. |
| 53 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed. |
| 54 | Supply and fix LED lamp 9/10 watt complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing LED tube light fitting 1x 20W, 4 feet ,220V, AC decorative box type with powdered coated aluminium housing & integrated electronic driver with THD<10%, 4KV surge protection, PF<=0.98 and 110 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.. |
| 56 | Material and labour for in repair for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth wire shall be measured as one unit length. |
| 57 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed. |
| 58 | Supply & fixing Sheet Metal Enclosures vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed. |
| 59 | Supply and fixing MCB, SP, AC, 240 volts 'C' series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. |
| 60 | Supply & fixing MCB. SPN, AC, 240 volts, 'C' series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. |
| 61 | Supply and fixing in replacement ceiling fans complete with blades, down rods and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Old unsv fan will be deposited to AGE E/M-II (South) yard only |
| 62 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.(Making of hole required if not available with no extra cost)Note: Old unsv fan will be deposited to AGE E/M-II (South) yard only. |
| 63 | Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed. Make ABB// Legrand/ Schneider/Indoasian |
| 64 | Supply & Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed |
| 65 | Taking down unsv cable of any type/size and S&F (in repair) , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 66 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed. |
| 67 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed by Engr-in-Charge. |
| 68 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 69 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. |
| 70 | Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. |
| 71 | Supply and fixing 45W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, 10KV surge protection and having 130 lumen/watt including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and directed by Engr-in-Charge. |
| 72 | Supplying and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 watt, complete with all acessories all as specified and directed by Engr-in-Charge. |
| 73 | Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed by Engr-in-Charge. |
| 74 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department . Please Enable Macros to View BoQ information |
