|
| 1 | Supply and installation of stud partition using Cstud. 48x0.5mm C-stud (IS 15961) placed at 610mm c/c in50x0.5mm (IS 15961) floor and ceiling channel . Floor andCeiling channel is anchored to the floor and True ceiling usingRawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinccoating, Pull Out Load-6.8kN for M30 concrete grade} /HiltiNail anchor fasteners at 600mm c/c in center line manner.Floor channel to be wrapped with 70µ Self Adhesive LDPEmoisture barrier film to further improve corrosion resistanceperformance. A noggin channel {Material-IS 513,Y/S-300Mpa,Finish - AZ150 (IS 15961)} of 48x0.5mm width has to beprovided at the horizontal joints of the two boards. Theframeowrk to be packed with 50mm th. 48kg/Cum. densityRockwool insulation infill to be covered with RP Tissue placedin metal framework. Framing to be wrapped with Double layerof 12.5mm thick Standard Gypsum plasterboards (Confirmingto IS 2095: Part 1) is screw fixed vertically to either side ofwall Studs with 25mm long Drywall Screws at 300mm centers.The screw fixing of Gypsum plasterboards to the metalframing at the periphery, openings and cut edges should be at150mm centers. The horizontal and vertical joints of theGypsum plasterboards on both sides of the metal frameworkmust be staggered so as to avoid through and through joints.All joints to be taped and finished with 50mm wide Paper tapeand All Purpose Joint compound. (Confirming to ASTM C475).The junction of the partition with masonry and all penetrationthrough the partition has to be treated with Hilti/Pyroplex fireand acoustic sealant. All other detailing and specifications tobe followed as per manufacturer specifications |
| 2 | 132mm thick Gypsteel ULTRA™ stud partition whichincludes two layers of tapered edge 15mm thick Gyproc®FRMR (conforming to IS 2095 Part 1 : 2011) fixed to eitherside of 72mm Gypsteel ULTRA™ Acoustud (0.5mm thickhaving one flange of 34mm and another flange of 72mmmade of GI Steel). Studs are placed at 610mm centre tocentre in 72mm Gypsteel ULTRA™ floor and ceiling channel(0.5mm thick have equal flanges of 32mm made of GI steel).Floor and ceiling channel are anchored to the floor and ceilingslab using suitable anchor fasteners(Anchor fastener HILTIHLC 8X40/HILTI X-GN20MX) at 600mm c/c in zigzag manner.15mm thick Gyproc® FRMR board strip of 94mm width isplaced between ceiling channel and ceiling slab to improvefire performance of the system. Stud and floor channel arecrimped together by using crimping tool. A 92mm GypsteelULTRA™ noggin channel (0.5mm thick having two flanges of40mm each) is to be fixed using Gyproc® Metal to Metal flathead screws at the horizontal joints of the boards. The boardsare to be fixed vertically to the framework with jointsstaggered to avoid leakage through joints with Gyproc®drywall screws of 25mm and 35mm at 600mm C/C at centreand 300mm C/C at periphery of board. Finally square andtapered edges of the boards are to be jointed and finished soas to have a flush look which includes filling and finishing withGyproc® Jointing compound, Gyproc Joint Paper tape (as perrecommended practices of Saint- Gobain Gyproc India) Thejunction of the partition with masonry and all penetrationthrough the partition has to be treated with fire sealant. M3Rockwool of density 64Kg/m3 has to be provided with RPtissue cover in the framework. |
| 3 | SINGLE GLAZED TOUGHENED GLASSPARTITIONS-with SYSTEM-50 FRAME PROFILES: Supply and installation of Aluminium Framed Glass Partition forAccess and Cabin System for minimal frame, room dividingsolutions. Single glazed mullion free demountable glasspartition using Toughened/ Laminated glass in proprietarynatural anodised/Black aluminium sections ALT 50 of size50mm x 30mm with Concealed sealing (No visibleGaskets/Seals) with acoustic rating of Minimum 32 db withthird party test certificate. The profile will have Carpert Grooveat the Bottom on both sides for accomodating max. 8mmcarpets. THe Glass to be fixed with help of ProprietaryStability GRIPPER Clamp to have a stable system. It shouldconsists of intermediate slim junction profiles for Glass toGlass vertical joints, 90 Degree L Junction and T Junctionprofiles suitably to be used as per room configurationdesigns.No VISIBLE Clip Lines to provide clutter free view atboth side of section. The Glass to be Offset mounted towardsouter edge leading to minimum aluminium frame on one side.Optional Profile Bottom Seal pair for additional accoustic.Glass thickness - 10( LSG).shall be included in the product. |
| 4 | Providing and fixing Philips LED 4` battenlight.Philips, bajaj |
| 5 | Providing and Fixing 100 mm th. Wooden partitionsupported with Al. framing partition frame work consisting of50mm x 25mm x 1.2mm (with 0.581Kgs / Rmt as per ISStandards of Jindal or equivalent make) thick extrudedaluminum box section framework at spacing not exceeding600mm both ways (horizontal and vertical). Frameworkformed using 50mm x 25mm x 1.2mm thick extrudedaluminum box section connected using 50mm X 25mm X1.2mm thick `L` angle support cleats fixed with 12mmgalvanized metal screws. Partition framework to be secured tofloor, structural support and nearest structural member usinggalvanized metal screws and wooden dowels. Framing shallbe taken upto structural ceiling slab- with a horizontal memberat top and bottom. Aluminum section to be cladded with 12mm th. commercial plyboard on both the sides. Rate to beinclusive of making cut outs for services. Mode ofmeasurement shall be as per elevational area.includingrockwool insulation.Make ,Bhutan TUFF, ACTION.EXCLUDING FINISHING LAMINATE/ VENEER |
| 6 | Providing and Fixing 1mm thick laminateas/approved sample laminate over MDF/ Ply, joints should bestaggered such that they do not overlap joints of MDF. MakeMerino, greenlam, Virgo |
| 7 | Providing and fixing ISi marked flush door shuttersconforming to IS : 2202 (Part I) decorative type, core of blockboard construction with frame of 1stclass hard wood and wellmatched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters. Inlcudingjointing pasting with as per design and grooves, matchingwith color of veneer. Complete in all respect. |
| 8 | Providing and fixing of modular trap doors as perarchitects approval. Make: Knauf (Trap Doors - 450X450mm) |
| 9 | Providing and Fixing necessary hardware like doorcloser,stopper, hinge(minimum 4 nos.), tower bolts, handleand lock, all in SS brushed finish |
| 10 | Supply and installation of GI open cell 600X600X100 mm ceiling with main runner 15 mmsuprafine 32WH cross tee 4`15mm suprafine cross Tee 1`15mm suprafine wall angle19*19 make Armstrong |
| 11 | Providing and fixing of modular trap doors as perarchitects approval. Make: Knauf (Trap Doors - 600X600mm) |
| 12 | Providing and fixing gypsum partition with GI frameand gypsum board on both sides with rockwoolinsulation.Make Gyproc, Armstrong, USG BORAL. |
| 13 | Providing and fixing 50 mm high Anodised/Powdercoated Aluminium Skirting Designed to be installed on wall,gypsum and plywood partitions and on top of all kinds offlooring Installed using screws, to camouflage the rivet points.a capping strip is provided either in PVC of matching color oraluminium. Supplied with pre-drilled holes and protection tapewhich is removed after completion, Matching corner guardsare provided with the profiles. |
| 14 | Supply and installation of 6-8mm thick 600X600mmCarpet tiles on deep cleaned existing vitrified tiles withsynthetic rubber adhesive. Fixed and cut to desired shape.Nylon wellspun carpte tile of pile weight of about 550gms/sqmwith vinyl backing. Suitable for castor chairs rated.Manufacturers warranty of minimum 5 years. Color anddesign to be approved by architect in charge. |
| 15 | Supply installation of engineered wooden flooringfixed over a foam layer with tongue and groove joints. Ends tobe terminated with matching beading. Laminated surfacewhich is scratch proof and replaceable in case of damage.With minimum 5 years warranty.Color and design to beapproved by architect in charge.Make- Action Tesa orcomparative |
| 16 | Fabricating and fixing DB storages made of 19mmply with louvers as per details. Shutters to be provided with allnecessary hardware like hinges, brushed SS handles, towerbolts, magnetic catchers, locks etc and complete as perarchitects instructions. Edges to have necessary lipping as perdetails. All the exposed and inside surfaces to be finished withlaminate . Rate to include 50mm high laminate skirting as perdetails.To have louvers on the shutters as per details |
| 17 | Supply and installation of High Quality 3M vinylprinting with self adhesive paspted on verticle surfaces. |
| 18 | Providing an fixing 125 x 60 mm wooden door framein Teak wood fixed with proper fastner/ hold fast etc. Doorframe to be polished in matt finish with black staining. |
| 19 | Providing And Fixing of Blue Star Stainless SteelWater Cooler, 150L, Metallic, SDLX15150 Complete in AllRespect. |
| 20 | The reverse osmosis block shall be 10Ltr , 8 StagePurification and double protection of 100% RO plus SCMTmakes the water baby safe, Silver Charged MembraneTechnology (SCMT) is an advanced additional stage ofpurification to prevent any potential secondary microbialcontamination post RO purification.Patented Side Stream ROMembrane ensures 100% water passes through the ROmembrane ensuring no impurity stands a chance of passingthrough.Copper Fortified Mineralizer: Ensuring you get 100%RO purified water with all essential minerals and benefits ofcopper in it. Retains natural taste with Alkaline Min-Tech. |
| 21 | Supply, installation, testing and commissioning ofExit push button complete as required. |
| 22 | NEC Digital IP ready PBX system Equipped withPower Supply,2 PRI,32 Hybrid Extensions (Both Analog /Digital) with CLI,8 Channel DSP Card for IP Applications,4Port Auto Attendant Welcome Greeting, with Voice Mail for 2hours,Day and Night with COS Control,8 PartyConference,Customised Music on Hold,There is 8 Sots, Out ofwhich 6 are Used. You may however add additional Cabinetsand CPU and Upgrade to 96 Extensions / 112 IP Extensions. |
| 23 | Supply installation Testing and commisioning of thefollowing LED lights. Light fitting to approved by Engineersincharge.36W 2`x2` LED Recess Mounted Light |
| 24 | Supply, receiving, unpacking, handling, storing,assembling, testing, erection, connecting and commissioningof 11W LED Exit Signage with LED system power:11W, luminous flux of luminaire 900lm, with 4 hrs batterybackup,battery voltage 6v and AH capicity of battery is 4AH.complete with all accessories in all respect. Make: Prolite |
| 25 | Supply, installation, testing and commissioning ofsingle Electromagnetic lock,600 lbs along with magneticcontact with door ajar alarm buzzer connectivity, along with LZ U Bracket with all accessories complete as required |
| 26 | Supply and commisioning of 13.5MHz, ISO 14443ASmart cards, 1KB (Kilo byte) memory, ISO Thickness, SmartCards with the possibility of printing the company details on itsfacia using sublimation method complete as required. |
| 27 | Supply, installation, testing and commissioning of12V/5V Door Ajar Buzzer with timer circuit suitable to beconnected to mentioned EM locks complete as required. |
| 28 | Supply, installation, testing and commissioning of13.56MHz, ISO 14443A/B Smart Card readers with keypad,Read Range 3` with weigand data format, UL, CE, FCC listed,Operating Temp -35 to plus 65 Deg C as per specificationsuitable for mounting on metal surface/metal frames orwooden frames or wall or as required based on site conditionswith all accessories complete in all repect as required. |
| 29 | Supply installation Testing and commisioning of thefollowing LED lights. Light fitting to approved by Engineersincharge.18W LED Downlighter Recess mounted |
| 30 | Providing and Ereaction / Laying of PVC/XLPEInsularedUnderground Aluminium Conductor Underground Cable onSurface/Existing Cable Tray Complete in all Respect WithNecessary Connection upto the Entire Satisfaction ofEngineerin Charge of the Work.4Cx10 sqmm-Cu |
| 31 | Supply installation Testing and commisioning of thefollowing LED lights. Light fitting to approved by Engineersincharge.20w LED Batten Light Fixture |
| 32 | INCOMER2 No. 63amps 4P MCB(16KA)METERING and INDICATION for each Incomer |
| 33 | Supply,Installing, Testing and Commissioning ofOne Set of 1 Nos., 15 KVA(1W) UPS. Each should havefollowing specifications in addition to tender requirements :(Battery will be provided as per single UPS) |
| 34 | INCOMER CUM OUTGOING1 No. 63amps 4P MCB(25KA)METERING and INDICATION for each Incomer |
| 35 | INCOMER CUM OUTGOING1 No. 125amps 4P MCCB(25KA) with thermal Magneticrelease with Class-C transient voltage surge suppressiondevice suitable for 3 phases as per specifications. |
| 36 | MAIN BUILDING PANEL1 No. 100amps 4P MCCB(25KA) with thermal Magneticrelease with Class-C transient voltage surge suppressiondevice suitable for 3 phases as per specifications. Sets ofphase indicating lamp with 2A control MCBs |
| 37 | NS Item -Supply Installation Testing and Commissioning ofIntelligent Mudlar Controller (IMC) supporting min 4 CardReader and Expandable up to 62 readers per gatewaycontroller, On-board Ethernet 10/100Base-T port, SerialCommunication, Supports Redundant Controllercommunication over LAN/Serial, 100,000 cardholders, 100000events, Firmware updates over LAN/WAN, Supports up to 8different Card formats and Facilty Codes, Enhanced antipassbackcapabilities i.e hard, Soft, Global. Local and Timed,Up to 32 access level, 255 holidays with grouping, 127timezones, each with 6 intervals, Individual extended heldopen and strike times (ADA required), Up to 9-digit user PINcodes, status LEDs, dedicated inputs for tamper and powerfailure status, 12 or 24 VDC input power Advanced EncryptionStandard (AES) 265/128-bit algorithm for communicationsover LAN/WAN, Capability to support min 08 Card readers, 32Supervised 4-State Inputs, 24 Form-C Relay Outputs rated at24/12VDC, 5/1A, CE, FCC certified, complete with mountingbracket and all necessary accessories, civil, electrical worksand peripheral items, as required.Note :1. Contractor needs to verify the existing Access cotrol systeminstalled. The hardware and software/specs will remain sameas the existing ones on the present.2. The Software to report should be in Excel Format (ReportGeneration) |
| 38 | Supplying, fixing, testing and commissioning offollowing patch cord including connections, ferruling etc. asrequired.Cat 6 Patch Cord 1m -Blue for Rack end for CCTV |
| 39 | Supply, installation, testing and commissioning of32` Full HD LED Display complete with all accessories asrequired. |
| 40 | Supply Installation of 6 TB HDD complete with allaccessories as required Approved Make : Seagate/WD |
| 41 | Supplying and drawing co-axial TV cable RG-6grade, 0.7 mm solid copper conductor PE insulated, shieldedwith fine tinned copper braid and protected with PVC sheathin the existing surface/ recessed steel/ PVCconduit as required. |
| 42 | Supply and fixing of the following Telephone TagBlock made out of M.S sheets of 18 SWG thickness properlywelded complete with all accessories such as Tag block,connector (KRONE make), mounting strips, tapped holes,fixing bolts, approved shad of paint after primer as perspecifications10 Pair |
| 43 | Supply installation Testing and commisioning of thefollowing LED lights. Light fitting to approved by Engineersincharge.15W LED Downlighter Surface Mounted |
| 44 | Supply and Fixing of openable top Cover floorJunction Boxes made from 2mm thick pre-galvanised GIsheets for bottom and sides and 3mm thick GI top Covercomplete with rubber gasketing beneath the top Cover. TheJunction Boxes shall be suitable to accommodate GI floorraceways as specified above, necessary civil work asdescribed in earlier item to be included here too. 200 x 200 x50 |
| 45 | Supplying, installing, Fixing, testing andcommissioning of wall mounted 22U rack with glass frontdoor, power supply , MCB, cable manager and wiring channelto accommodate system equipment. |
| 46 | Supply, installation, testing and commissioning ofEmergency exit push button including break glass enclosurecomplete as required. |
| 47 | Same as Above but 10 pair telephone cable of jellyfilled Armored cable. in existing pipe |
| 48 | Supply and fixing of the following Telephone TagBlock made out of M.S sheets of 18 SWG thickness properlywelded complete with all accessories such as Tag block,connector (KRONE make), mounting strips, tapped holes,fixing bolts, approved shad of paint after primer as perspecifications20 Pair |
| 49 | Supplying, wiring and connecting following pairs 0.6mm dia twin core tinned copper conductor PVC insulated andsheathed Unarmoured telephone cables in existing pipes.10Pair |
| 50 | Supplying and fixing following modular switch/socket on the existing modular plate and switch box includingconnections but excluding modular plate etc. as required.TV antenna socket outlet |
| 51 | Clean Agent GAS SUPPRESION SYSTEM (Approx.Size of Main Server / UPS Rooms No 1:- As per drawing )Design, supply, installation, testing and commissioning ofCCOE Approved Seamless Novec 1230/FK-5-1-12 Cylinderand PESO approved Valve Assembly, OEM Factory filled withNovec 1230/FK-5-1-12 Suppression Liquid , pressurised to 50bar. Kit complete with Solenoid, Pneumatic actuators,Pressure Gauge, Low pressure supervisory switch, Dischargehoses, Flexible actuation hoses and connectors to completethe system,Including UL or Vds Listed Nozzles, VdS or UL ManifoldCheck Valve, Piping as required,Sch 40, ASTM A106 Gr B, Wall mount kit or Floor MountRack, Warning Signages `Do Not Enter` or `Exit-GasReleased` working on 24V DC power suppy, ConventionalHooter, Single zone Gas Release Panel , Manual releaseswitch, Abort switch- VDS or UL Listed.Bidder to take actual dimension of server room during sitevisit. |
| 52 | Supplying, drawing, connecting, testing andcommissioning of 8 core x 0.5 sq. mm. stranded copperconductor, pvc insulated PVC sheathed, shielded FRLS wirein existing conduit. (For Access Control) |
| 53 | Supply and Fixing of factory fabricated pregalvanizedG.I. sheet steel raceway in 2mm thickness forbottom and sides and 2/3mm thick top Cover as called forincluding necessary civil work such as chase cutting in screed,fixing/ jamming the raceway, aligning and levelling andfinishing with sand cement plaster alongwith PCC base80mm x 38mm (2mm top Cover) |
| 54 | Supply and Fixing of 32 Port PoE Fast EthernetWebSmart Switch, including 2 Gigabit BASE-T , 2 GigabitCombo and 2 SFP Port BASE-T/SFP Network Switch.. |
| 55 | Supply, installation, testing and commissioning of16 Channel HD NVR , 1080P high resolution live view ,Standard H.264 compression , Playback of upto 4 channelsimultaneously , Multiple recording options: manual, schedule,motion detection , HDMI and VGA output simultaneously upto1080P resolution, 1/2 SATA HDD interface: maximum ,6 TBstorage capacity , CE, FCC certification and Storage upto 30days. |
| 56 | 2 Megapixel CMOS image sensor, H.264 andMJPEG dual-stream encoding, Max 20FPS@4MP(1920×1080) and 25/30FPS@960P(1280×960), 4mm LensDay/Night(ICR), 2DNR, AWB, AGC, BLC,Max. IR Distance:30m, 1 Array LED , IP66, Mobile Soft: CMOB,(4MP HD IPSMART IR 30 Mtr Bullet Camera with HD Lens) |
| 57 | 2 Megapixel CMOS image sensor, H.264 andMJPEG dual-stream encoding, Max 20FPS@4MP(1920×1080) and 25/30FPS@960P(1280×960), 4mm Lens,Day/Night(ICR), Array IR Distance: 25m,(4MP HD IP SMARTIR 25 Mtr Dome Camera with HD Lens. |
| 58 | Supply and Fixing of factory fabricated pregalvanizedG.I. sheet steel raceway in 2mm thickness forbottom and sides and 2/3mm thick top Cover as called forincluding necessary civil work such as chase cutting in screed,fixing/ jamming the raceway, aligning and levelling andfinishing with sand cement plaster alongwith PCC base :100mm x 38mm (2mm top Cover) |
| 59 | Supply and Fixing of factory fabricated pregalvanizedG.I. sheet steel raceway in 2mm thickness forbottom and sides and 2/3mm thick top Cover as called forincluding necessary civil work such as chase cutting in screed,fixing/ jamming the raceway, aligning and levelling andfinishing with sand cement plaster alongwith PCC base150mm x 38mm (2mm top Cover) |
| 60 | Supply and Fixing of factory fabricated pregalvanizedG.I. sheet steel raceway in 2mm thickness forbottom and sides and 2/3mm thick top Cover as called forincluding necessary civil work such as chase cutting in screed,fixing/ jamming the raceway, aligning and levelling andfinishing with sand cement plaster alongwith PCC base :225mm x 38mm (3mm top Cover) |
| 61 | Supply and Fixing of openable top Cover floorJunction Boxes made from 2mm thick pre-galvanised GIsheets for bottom and sides and 3mm thick GI top Covercomplete with rubber gasketing beneath the top Cover. TheJunction Boxes shall be suitable to accommodate GI floorraceways as specified above, necessary civil work asdescribed in earlier item to be included here too. 100 x 100 x50 |
| 62 | Supply and Fixing of openable top Cover floorJunction Boxes made from 2mm thick pre-galvanised GIsheets for bottom and sides and 3mm thick GI top Covercomplete with rubber gasketing beneath the top Cover. TheJunction Boxes shall be suitable to accommodate GI floorraceways as specified above, necessary civil work asdescribed in earlier item to be included here too. 150 x 150 x50 |
| 63 | Supply and Fixing of openable top Cover floorJunction Boxes made from 2mm thick pre-galvanised GIsheets for bottom and sides and 3mm thick GI top Covercomplete with rubber gasketing beneath the top Cover. TheJunction Boxes shall be suitable to accommodate GI floorraceways as specified above, necessary civil work asdescribed in earlier item to be included here too. 325 x 325 x50 |
| 64 | Supply and fixing following Data /Lan modularsocket RJ - 45 Socket |
| 65 | Supplying and drawingof UTP 4 pair CAT 6 LANCable in the existing surface / recessed steel / PVC conduit asrequired1 run of cable |
| 66 | Supplying and drawing following pair, 0.5 mm diaFRLS PVC insulated copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ PVC conduit asrequired.2 Pair |
| 67 | Supplying and fixing following modular switch/socket on the existing modular plate and switch box includingconnections but excluding modular plate etc. as required.Telephone socket outlet |
| 68 | Supplying and fixing following size/ modules, GI boxalong with modular base and cover plate for modular switchesin recess etc as required. 1 or 2 Module (75mm x 75mm) |
| 69 | Supply and Fixing sutiable 400 mm sweep wallmounted fan |
| 70 | Supply installation Testing and commisioning of the30W LED Suspended/ Furface Mounted LED Light |
| 71 | Lounge Sofa |
| 72 | Librarian Chair |
| 73 | Reception Table |
| 74 | Workstation Computer table |
| 75 | Working Desk 120 degree 1200X1200 |
| 76 | Coffee Chair |
| 77 | Coffee Table |
| 78 | Storage 2 |
| 79 | Storage 1 |
| 80 | Storage 3 |
| 81 | Lockers |
| 82 | Coffee Sofa |
| 83 | Lounge Chair |
| 84 | Reception Chair |
| 85 | Security Chair |
| 86 | Security Table |
| 87 | Librarian Table |
| 88 | High Chair |
| 89 | Visitor`s Chair |
| 90 | Providing and installing DELL DESKTOP VOSTRO3710 I3 12TH GEN 8GB RAM 512 SSD WIN 11 MSO 2021WITH “20” INCH SCREEN WITH WIRED KEYBOARD andMOUSE and MCAFEE ANTIVIRUS 1YEAR WITH 3 YEARWARRANTY |
| 91 | Working Desk 120 degree |
| 92 | Semi circular Table |
| 93 | Chairs |
| 94 | Revolving chair |
| 95 | Fire Extinguisher WorksProviding and fixing Fire Extinguishers (CO2 type powder ) 4.5Kg,s (A, B, C type powder ) 6 Kg,(A, B, C type powder ) 9 Kgand Fe 36 modular Fire Extinguishers 10 Kg Capacitycomplete with all accessories as per manufacturer complete inall respect |
| 96 | Ducting and GrillesRectangular GI Ducting (Factory Made),Duct AccousticLining,Duct Insulation,Grilles, Diffusers, VCD,AOP cell withNANOX and PLASMAOX technology and Bi Polar Ionizer. |
| 97 | HVAC PlumbingCondensate Drain Piping With Nitrile Rubber Insulation(25mm dia pipe, 13 mm Insulation,32 mm dia pipe , 13 mmInsulation,40 mm dia pipe , 13 mm Insulation)Insulated Refrigerant Piping for VRV / VRF System (Variousdia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mmthick insulation |
| 98 | Sub Head `A` - MachineryVariable Refrigerant Volume / Flow Air-conditioning System(Air Cooled VRV / VRF Outdoor Unit 34(18 plus 16) H.P Cool /Heat Pump Unit)INDOOR UNITS (CASSETTE UNIT 1.6 TR)INDOOR UNITS (CASSETTE UNIT 2.0 TR)Double Skin CS/FM VRV DX AHU (AHRI / Eurovent Certified)(CS-AHU 5000 CFM (40mm SP))Expansion Kit, Communication PCB and Thermostat (For2400-5000 CFM C/S AHU with 1 x 20.0 HP VRV ODU)Y-joints For Indoor UnitMain Intelligent Programmable Central Controller (CordedType)PROPELLER FANS (200 CFM (with plastic blade)) |
| 99 | HVAC Electric WorkELECTRICAL PANEL for VRV Outdoor Units (34 HP),POWERCABLES,CONTROL CABLING,CABLE TRAYS,EARTHING |
| 100 | Construction of E-Library in Subhash Park, Municipal Council, Ambala Sadar Please Enable Macros to View BoQ information |
