|
| 1 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers |
| 2 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers |
| 3 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 4 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 5 | Painting the old Iron works with best black anti-corresive paint of approved quality, colour and brand (to be approved by executive engineer before use of workI including cost of brushes, high scaffolding charges, neat finsishing, complying with standared specification and as directed by the departmental officers 10m2 106 |
| 6 | Brick work in following Cement Mortar using best quality II Class Ground Moulded Chamber Burnt Bricks 9\\" x 43/8\\" x 23/4\\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 7 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unshealhed SC.Cu. conductor of 1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (For Electronic regulator) (5 points per coil). SD-23 |
| 8 | Wiring with 2x1.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 11mm TW switch box for 5A 3pin non interlocking Wall socket with 5A flush type switch with painting of suitable colour with continuous earthwire connectin of 1.5sq.mm copper wire for open PVC plug point. 1224.4 SD-36 |
| 9 | Supplying and fixing of 1200mm ( 48'' ) sweep AC ceiling fan complete with regulator with 1M down rod including S & F of fan clamp with side plates and cross arm etc, complete as per standard specifications SD 106 |
| 10 | Supply and fixing of 4Feet LED 18W Fitting with LED 18W tube (Lower End) complete with TW round blockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. SD-440 |
| 11 | Supply and Delivery and Fixing of the following ISI Make water supply materials including all labour charges etc complete |
| 12 | 75mm Elbow |
| 13 | 75mm Tee |
| 14 | 75mm Vent Cowl |
| 15 | 25mm PVC Pipe |
| 16 | 110mm PVC Pipe |
| 17 | 12Litre RO |
| 18 | Tharpai |
| 19 | 75mm PVC Pipe |
| 20 | Supply and Delivery of Fly Catcher of High Quality certificate machine etc complete |
| 21 | Repair and Maintenance of weight Machine and replacement of damaged parts and other required spare parts and removing and fixing of machine at site etc., |
| 22 | Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. |
| 23 | Repair and Maintenance of shredder Machine only for segregation garbage removing, cleaning and refixing of blade and other required spare parts and removing and fixing of machine at site etc., |
| 24 | Repair and Maintenance of Sand Screening Machine for Screening of waste and other materials and changing of damaged mesh, motor belt and eletrical cable and painting work and replace of damage part and at site etc., |
| 25 | Repair and Maintenance of belt conveyor removing, cleaning and refixing of Belt, motor ,bearing and other required spare parts and removing and fixing of machine at site etc., ` Please Enable Macros to View BoQ information |
