|
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 3 | S&F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4.complete all as specified and as directed. |
| 4 | M&L for Virified Ceramic tiles double charged 8 - 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 15 mm thk cement screed bed in cm 1;4 complete all as specified and as directed. |
| 5 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4. |
| 6 | M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes complete all as specified and as directed. |
| 7 | Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 8 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 9 | Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each |
| 10 | Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed. |
| 11 | S&F 2nd class hard wood as in plain straight chowkat and frames wrought framed rebeared on the solid rounded or charmfered but together with glue pinned at joints,etc complete all as specified and as directed |
| 12 | M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 13 | Supply and fixing 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed. |
| 14 | Supply and fixing 2nd class HW 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.complete all as specified and directed. |
| 15 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 16 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 17 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 18 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 19 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of wood grain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 20 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and wood grain pirinted PVC for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to & 5 mm thick x 15 mm wide PVC sheet beading and decorative PVC beading of 10mm x 10mm (90 degree) with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified . |
| 21 | Supply & fixing for frosted glass / tined glass 4.8 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed. |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 23 | Supply & fixing Sheet glass 4mm thick,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each inculding hackinng out old broken glass complete all as specified and directed. |
| 24 | S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 25 | S & F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 26 | S&F in repair to Harrison rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed |
| 27 | S&F for butt hinges 75 mm long medium weight, cold rolled stainless steel complete all as specified and directed. |
| 28 | S&F in repairs MS butt hinges of 75 mm size cold rolled stainless steel medium weight, ISI marked complete all as specified and directed. |
| 29 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section. |
| 30 | S&F in repair 150mm aluminium anodised barrel tower bolts of extruded section and fixed. |
| 31 | Supply and fixing 125 mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 32 | Supply and fixing in repairs 125 mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 33 | S&F butt hinges 100 mm long medium weight, cold rolled stainless steel complete all as specified and directed. |
| 34 | S&F in repairs MS butt hinges of 100 mm size cold rolled stainless steel medium weight, ISI marked complete all as specified and directed. |
| 35 | S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 36 | S & F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 37 | Supply and fixing 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed. |
| 38 | Supply and fixing in repairs 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed. |
| 39 | S & F for 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 40 | S & F in repairs 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 41 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 42 | Supply and fixing in repairs 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 43 | Demolition of cement concrete in reinforcement and in any position not otherwise specifically provided complete all as specified and directed. |
| 44 | M&L for Granite (of any type) tiles 18-20mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing ncluding 15 mm thick screed bed in cement sand mortar 1:4 complete all as specifed and directed by EIC. |
| 45 | M& L for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations |
| 46 | Demolition Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 47 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 48 | M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 |
| 49 | Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified . |
| 50 | Rendering 15mm thick on fair faces of brick work or concrete surfacesin cement mortar 1:6 and finishe even and smooth without using extra cement complete all as specified and as directed. |
| 51 | M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% complete all as specified and directed.( Note :Water proofing compound shall be measured and paid separatel) |
| 52 | Supply only integral water proofing compound complete all as specified and directed. |
| 53 | M&L for 5mm rendering thick in CM (1:3) on ceiling sufaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 54 | M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed. |
| 55 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed. |
| 56 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of oil bound distemper complete all as specified and directed. |
| 57 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of oil bound distemper complete all as specified and directed. |
| 58 | M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed. |
| 59 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed. |
| 60 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed. |
| 61 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 62 | M & L for complete removal of existing finish on walls including chajjas, facias etc. including filling of holes and cracks with putty on wall as per manufacturer's instructions and applying two coat of weather proof acrylic exterior paint (100% Acrylic)over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 63 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of cement base paint complete all as specified and directed. |
| 64 | M&L preparation of old steel surfaces and applying one coats of synthetic enamel paint of any description over 10 cm width and girth complete all as specified and directed. |
| 65 | M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed. |
| 66 | M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. |
| 67 | M & L for preparation new or prevously untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 68 | Removing the existing roof treatment completely, Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed. |
| 69 | Brushing neat cement slurry with 3.0kg of cement per sq. Metre |
| 70 | Material & labour for rendering 15 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. (Note;- water proofing compound shall be measured and paid separately as supply only) |
| 71 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces forced application complete all as specified. |
| 72 | M&L for preparation of new surfaces of any description, over APP based polymeric membrane and applying one coat of aluminum paint , complete all as specified and directed. |
| 73 | S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) EWC white complete incl seat and cover, flush pipe incl all joints complete. |
| 74 | S&F in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580xmmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and direrected. |
| 75 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand. |
| 76 | S &Fixing in repairs Vitreous china urinals, bowl typeflat back size 465 x 355x 265 mm whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws. |
| 77 | S&F for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe |
| 78 | S&F in repair 32mm PVC pipe for waste fitting,brass , CP for glazed ware sinks,basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixedcomplete all as specified. |
| 79 | S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe. |
| 80 | S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 81 | S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 82 | S & F in repairs 15 mm bore chromium plated twin one bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 83 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube andABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed |
| 84 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 85 | S&F in repair stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 86 | S/F in repairs PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed. |
| 87 | S&F in repairs 15mm dia PVC connection pipe with PTMT nuts of length 450mm all as directed incl taking down old one. |
| 88 | S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms). |
| 89 | S&F in rotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified |
| 90 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified. |
| 91 | S&F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified |
| 92 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 93 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 94 | Supply and laying for 20mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed. |
| 95 | Supply and laying for 25mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. of following sizes :-etc complete all as specified and directed. |
| 96 | Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) . |
| 97 | S&F 150 mm dia PVC (SWR) pipes single cocketed , in any length , in rubber ring joints fixed in walls. |
| 98 | S&F 150 mm dia bore PVC (SWR) bends . |
| 99 | S&F 110 mm dia PVC (SWR) pipes single cocketed , in any length , in rubber ring joints fixed in walls. |
| 100 | S&F 110 mm dia bore PVC (SWR) bends . |
| 101 | S&F 110 mm PVC (SWR) junction single(Single T) equal or unequal with access doors. |
| 102 | S&F 110 mm PVC (SWR) vent cowl |
| 103 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 104 | S&F 75 mm size PVC(SWR) bends any radius complete all as specified and directed |
| 105 | S&F 75 mm PVC (SWR) junction single(Single T) equal or unequal with access doors. |
| 106 | S&F 75 mm PVC (SWR) junction double,(double T), equal or unequal with access doors. |
| 107 | S&F 75 mm PVC (SWR) branch piece,single (single Y) equal orunequal with access doors. |
| 108 | S&F 75 mm PVC (SWR) branch piece,double (double Y) equal or unequal with access doors. |
| 109 | S&F 75 mm dia bore PVC (SWR) couplers |
| 110 | S&F 75 mm dia bore PVC (SWR) reducers |
| 111 | S&F 75 mm PVC (SWR) vent cowl |
| 112 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed. |
| 113 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 114 | S & F pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and a directed by Engineer-in-Charge. |
| 115 | M&L for plain Cement Concrete type C2 1:3:6 (40mm graded aggregate) as in foundation filling or in mass concrete. |
| 116 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed. |
| 117 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of gin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of lasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and as directed. |
| 118 | S & F 18 mm thick Wood Plastic Composite (WPC) boards with one side decorative lamination & other side balancing lamination fabricated using adhesive and all required brackets, screws etc. as in shutters including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer instructions as specified and as directed. |
| 119 | S & F 18 mm thick Wood Plastic Composite (WPC) boards, plain white fabricated using adhesive and all required brackets, screws etc. solid board plain, for shelf / partition including covering the edges with 2mm thick edge bonding tape or 90 degree edge bent finish all as per manufacturer instructions as specified and as directed. |
| 120 | Supply and fixing for 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed. |
| 121 | Supply and fixing in repair 100mm size Aluminium handles, cast type,anodised,ISI marked complete all as specified and directed. |
| 122 | S&F for 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified. |
| 123 | S&F in repair 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified. |
| 124 | S & F for 100mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed. |
| 125 | S & F in repair 100mm size aluminium anodised,barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed. |
| 126 | S & F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as spd |
| 127 | S&F for magnetic PVC catcher for kitchen/shelve cup board complete. |
| 128 | M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same |
| 129 | M&L for cutting out cracks to V-section in existing tile floor , cleaningout, wetting, grouting with cement and sand slurry 1:3 mixed with water proofing compound @ 3% by weight of cement including joint filling for sealing compound as per manufacture |
| 130 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 131 | M& L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm of thickness 6mm frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 132 | S&F 5 mm thick solid PVC wall lining consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling old wall panelling dismantling alll as directed by the Engineer In Charge |
| 133 | S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall male pvc frame complete Please Enable Macros to View BoQ information |
