|
| 1 | Item Description |
| 2 | Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% andconforming to IS: 15622- 2017, of approved make, in allcolours and shades, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), jointing with grey cementslurry @ 3.3 kg/ sqm including grouting the joints withwhite cement and matching pigments etc. all complete asper direction of the Engineer-in-charge.. Soluble Salt Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm |
| 3 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal ofsurplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 5 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 40 mm nominal size) |
| 6 | Clearing jungle including uprooting of rank vegetation,grass, brushwood, treesandsaplingsofgirthupto30cmmeasured at a height of 1mabove ground level andremoval of rubbishuptoadistanceof 50moutside theperiphery of the area cleared. |
| 7 | ProvidingandfixingPrecastchequeredcementconcretetiles18mmthick, laid in footpath&courtyard, on20mmthickbedof cementmortar1:4(1cement :4finesand) jointedwithneatcementslurryincludingrubbingand cleaning etc. all complete as per direction ofEngineer-in-charge. In dark shade using ordinary cement |
| 8 | Providingwoodwork in framesof doors,windows,clerestorywindowsandotherframes,wroughtframedand fixed in position : Local Teak Wood |
| 9 | Providingandfixingpanelled/orpanelledandglazedshutters fordoors,windowsandclerestorywindowsincluding ISI marked bright finished / blackenamelled M.S butt hinges with necessary screwsexcludingpanellingandorglazing,whichwillbepaidforseparatelybutincludingthewoodenbeadingof20×12mmfor fixingpanellingandor glazingasperdirection of Engineer-In-Charge. 35 mm thick shutters |
| 10 | Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hardwood and well matched teak 3 ply veneering withvertical grains or cross bands and face veneers onboth faces of shutters. 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws. |
| 11 | Providing40×5mmflat ironholdfast40cmlongincludingfixingtoframewith10mmdiameterbolts,nuts andwooden plugs and embedding in cementconcreteblock30×10×15cm1:3:6mix(1cement:3finesand : 6gradedstoneaggregate20mmnominalsize) |
| 12 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the door frameto be jointed with galvanized brackets and stainlessscrews, joint mitred and plastic wilded. The hinge sidevertical of the frames reinforced by galvanized MStube of size 19 × 19 mm and 1 mm +/- 0.1 mm wallthickness and 3 nos stainless steel hinges fixed to theframe complete as per manufacturers specificationand direction of Engineer-in-Charge. Extruded section Profile size 48x40 mm |
| 13 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserying galvanised MStube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVChollow section of size 100×24 mm and 2 mm ± 0.2 mmwall thickness fixed to the shutter styles by means ofplastic /galvanised MS \\"U\\" cleats. The shutter framefilled with a UPVC multi-chambered single panel of sizenot less than 620 mm, having overall thickness of 20mm and 1 mm ± 0.1 mm wall thickness. The panelsfilled vertically and tie bar at two places by insertinghorizontaly 6 mm galvanised MS rod and fastened withnuts and washers, complete as per manufacturer'sspecification and direction of Engineer-In-Charge. (forW.C. and Bathroom door shutter). |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge: With cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 15 | Distempering with 1st quality washable acrylicdistemper of approved brand and manufacture and ofrequired shade on old work ( one or more coats ), togive an even shade as required complete as perdirection of the Engineer in charge. |
| 16 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 17 | Painting on G.S. sheet with synthetic enamel paint ( oneor more coats ) of approved brand and manufacture ofrequired colour to give an even shade on old workincluding preparation of surface as required completeas per direction of the Engineer in charge: |
| 18 | Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. |
| 19 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 20 | Providing and fixing flyproof galvanisedM.S. wiregauge to windows and clerestory windows usinggalvanisedM.S. wire gaugewith averagewidth ofaperture1.4mminbothdirectionswithwireofdia.0.63 mm. With Gamair wood beading 62 × 19 mm |
| 21 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge.Internal work - Exposed on wall 15 mm nominal outer dia .Pipes. |
| 22 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsThisincludesjointingofpipes& fittings with one step CPVC solvent cement,trenching ,refilling&testing of jointscompleteasper direction of Engineer in Charge. External work 25 mm nominal outer dia .Pipes. |
| 23 | Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved makeconforming to IS:8931. 15 mm nominal bore. |
| 24 | Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:8931 15 mm nominal bore |
| 25 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia |
| 26 | Providing and fixing white vitreous china squatting plateurinal with integral rim longitudinal flush pipe. |
| 27 | Providing and fixing on wall face unplasticised RigidPVC soil, waste & vent pipes (working pressure 4 kg /cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion: Single socketed pipe - 75 mm OD |
| 28 | Providing and fixing on wall face unplasticised RigidPVC soil, waste & vent pipes (working pressure 4 kg /cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion: Single socketed pipe - 110 mm OD |
| 29 | steel table full secretariat laminated sheet top three drawers with automobile locking device to the right side and a cupboard with one drawer to the left side stotage unit size H20''Xw25''(60''X30''X30'') |
| 30 | Steel Almirah (with four sheves) 20 Gauge 78''x36''x18'' |
| 31 | Steel tubular resting chair (with cushioned seat and back with arm) (Godrej 7B) |
| 32 | Providing and fixing white vitreous china water closetsquatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 33 | Providing and fixing P.V.C. low level flushing cisternwith manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete. 10 litre capacity-White |
| 34 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 156222017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge. Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles 300 mm x 300 mm in all shades and designs |
| 35 | Providing and fixing 1st class quality ceramic glazed walltiles conforming to IS : 15622- 2017 (thickness to bespecified by the manufacturer) of approved make in allcolours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 finesand) jointed with ordinary cement slurry includingpointing with white cement mixed with pigment ofmatching shade etc. all complete as per direction of theEngineer in-charge. 450 mm X 300 mm in all shades and design |
| 36 | 6.12 Half brickmasonryworkwith first class bricks insuperstructureuptofloor five level includingcostofall materials as required complete: In cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 37 | First classbrickworkinsuperstructureaboveplinthlevel & upto floor-five level including cost of allmaterials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 38 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 39 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid |
| 40 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require : White Vitreous China Wash basin size 550x400 mm with apair of 15 mm C.P. brass pillar taps. |
| 41 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mmthick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete. |
| 42 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 43 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved qualityand colour. 600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not lessthan 190gms. |
| 44 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. 2x1.5 sqmm |
| 45 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. 2x2.5 sqmm |
| 46 | Supplying and fixing of the following Lamps &accessories including connection etc. as required. 1) 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- Please Enable Macros to View BoQ information |
