|
| 1 | ADDITION ALTERATION B/R WORK |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built in cement or cemnt lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 4 | Demolition of cement Concrete (unreinforced) in ground floors and pavings In exc 15 cm thickness below or above ground level complete all as specified and as directed. |
| 5 | Supply and fixing of Motorised Rolling Shutter (HSN code-7308) Model: RS78G, Curtain made of single skinned Galvanised steel laths, Pressed galvanised steel hood & motor cover, Finish: Prepainted / two coats of polyurethane spray paint Non standard RAL over one coat of epoxy primer, CE Certified CRS Compact Gear P.R.C. Make Indirect Drive Operator Wind lock-Storm anchors, three station push button with deadman control with M.S. support structure for rolling shutter, 100x50mm ISMC with one coat of epoxy primer including freight charges, transit insurance etc., complete all as specified and as directed. |
| 6 | Supply and lay of M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc., of size 80mm complete all as specified and as directed. |
| 7 | Material and labour for Cement concrete type C2 (1:3:6) in foundations, filling and mass concrete complete as specified and as directed. |
| 8 | Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in old size bricks in cement mortar 1:6 complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc., complete all as specified and as directed. |
| 10 | Material and labour for 15 mm thick CM plaster in CM(1:4) on fair faces of brickwork or masonary work rendering to be finished even and smooth complete mixed with WPC all as specified and as directed.Note : WPC measured and paid seperately. |
| 11 | Material and labour for 15 mm thick CM plaster in CM(1:6) on fair faces of brickwork or masonary work rendering to be finished even and smooth complete all as specified and as directed. |
| 12 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 13 | Material and labour for for preparation of newly plastered surfaces and applying two coat of distemper oil emulsion (white or tinted) over Priming plastered and other surfaces with alkali resistant priming paint on wall complete all as specified and as directed. |
| 14 | Material and labour for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed. |
| 15 | Material and labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 (type C-2) of 150mm dia pipe complete all as specified and as directed. |
| 16 | Material and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi-tred/stopped ends etc as specified and as directed. |
| 17 | Supply and fix of 150 mm PVC (SWR) pipes singlesocketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 18 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 150mm of pipe complete all as specified and as directed. |
| 19 | Material and labour for Cement concrete 100mm thick type D-2, 1:4:8 40mm graded aggregate complete all as specified and as directed. |
| 20 | Material and labour for providing precast cement concrete in CM (1:4) of nominal mix (1:1.5:3) (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc., complete all as specified and as directed. |
| 21 | Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spefied and as directed. |
| 22 | Taking down chowkhats or frames of size exc. 1.5 sq. m and not exc 4 sqm each withshutters without taking off shutters from the frames complete all as specified and as directed. |
| 23 | Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete as specified and as directed. |
| 24 | Material and labour for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats and holdfast including necessary form work complete all as specified and as directed. |
| 25 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh Two nos. glazed & one no. wire mesh panels upto 1.50m height made of big series frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. Area of window above 1.75 sqm comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy white powder coated touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. |
| 26 | Note: Glass or wiremesh shall be paid separatelyFor UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 27 | Supply and fix of Anodised aluminium window and ventilator shutters Powder coating of any colour as spproved (Thickness or powder coating not less than 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed. |
| 28 | Preparation of new or previously untreated steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 29 | Supply and fix of powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 30 | Supply and fix for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed. |
| 31 | Material and labour for 12 mm thick Prelaminated particle board, interior grade, prelaminated on both side with decorative choice lamination & other side balancing white lamination complete all as specified and as directed. |
| 32 | Supply and fix 4.8 mm thick sheet glass selected quality approved fixed in position in aluminium/iron/wooden frame work including rubber beading and pointing cleats/glazing with oil putty complete all as specified and as directed. |
| 33 | Supply and fix of aluminum (Die cast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as spcified and as directed. |
| 34 | Supply and fix of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of Overall length of cover plate 150 mm complete all as specified and as directed. |
| 35 | Returning, filling in hard/ dense soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed. |
| 36 | Removing excavated material exceeding 1.50 km but not exceeding 5 km and depositing where complete all as specified and as directed. |
| 37 | Material and labour for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. |
| 38 | Material and labour for demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) of cement concrete (unreinforced) complete as specified and as directed. |
| 39 | Material and labour for cement concrete (1:2:4) type C-2 using 40mm graded stone aggregate 75mm thick complete all as specified and as directed. |
| 40 | Material and labour for Non-skid colour ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors including screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes all as specified. set and jointed in cement slurry @3 Kg/Sqm and pointed in white or colour cement to match existing surfaces complete all as specified and as directed. |
| 41 | ADDITION ALTERATION E/M WORK |
| 42 | Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm of 3 core cable complete all as specified and as directed. |
| 43 | Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm of 3.5 core cable complete all as specified and as directed. |
| 44 | Supply and fix sheet metal enclosure for board distribution double door with 200 Amps double door rated bus bar TPN 4 way complete all as specified and as directed. |
| 45 | Supply and fix sheet metal enclosure for board distribution Single door SPN 2 Way complete all as specified and as directed. |
| 46 | Supply and fix MCB TPN 100 Amps , 451 volts Rupturing capacity 16 kA 'C' curve complete all as specified and as directed. |
| 47 | Supply and fix SPN 40 to 63 Amps rating, 240V, 10kA 'C' Curve miniature circuit breaker (MCB) fo following poles and current carrying capacity in the MCB DB complete with connection testing and commisioning complete all as specified and as directed. |
| 48 | Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 32 x 6mm means of bolts, nuts washers, check nuts as shown in electrical plate No. 3 connected to earthing test points including excavation and earth work PCC 1:2:4 type B-1(using 20mm graded aggregate) in PCC chamber RCC cover 50mm thick in RCC 1:2:4 type B-1 ( 20mm graded aggregate) with 8 mm TMT bars at 15 cm c/c in both ways with hooks, funnels with 20 mm dia GI watering pipe medium grade, wire mesh and funnel 15 mm dia GI protection pipe light grade and testing on completion including taking out old u/s earthing accessories complete all as specified and directed. |
| 49 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc., as required 32X6mm GI stip complete all as specified and as directed. |
| 50 | Supply and lay DWC HDPE pipe ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket, bend, couplers etc. Conforming to IS 14930 , Part II complete with fitting and cutting, jointing etc., of Size 63 X 50 mm dia ( ODX ID) complete all as specified and as directed. Please Enable Macros to View BoQ information |
