|
| 1 | Demolition of Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish outside MOD land complete all as specified and directed. |
| 4 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 5 | M&L for Preparing newly plastered surfaces and applying two coats of Premium emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth. |
| 6 | Demoltion of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris outside MOD land. |
| 7 | M&L for 50 mm thick Cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed. |
| 8 | M&L for light coloured vitrified tiles Double charged vitrified tiles tiles of any design and pattern, 800x800x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed. |
| 9 | M&L for light coloured Double charged vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM (1:6) Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, tiles shall be free from visible defects including dismantling existing tile work with screed bed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by GE .Complete all as specified and directed |
| 10 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar (1:4) and including dismantling existing tile work with plaster complete all as specified and directed. |
| 11 | S&F Stainless steel commercial modular kitchen matt finish cabinets 700mm width and 850mm hight having 1.2mm thick with 1mm Thick food grade 304 stainless work top, with reinforced lining 430 Grade stainless steel for the remainder and including sliding/openable doors with lockable castors, Drawers with strong steel runners and Adjustable internal strong shelf, all types of SS Baskets, auto closing hinges and handles complete all as specified and directed. |
| 12 | M&L 18 mm thick granite work any type as in Cooking plat form, Steps, pillars, display boards, wall cladding and like incl 15 mm thick screed bedding in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges complete, all as specified and directed. |
| 13 | M&L for false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed powder coated white consisting of main T-runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall / partitions on a W- Profile wall section made of Pre-coated galvanized steel of dimension 3.0mm long x (15mm +10mm)x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI Suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia GI hangers and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required and including dismantling of existing false ceiling any specification and any hight complete all as directed |
| 14 | Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) |
| 15 | S&f Pressed steel frames Double or Single grue 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 16 | M&L cement concrete type C0, (1:3:6) (using 12.50 mm graded aggregate) for filling in steel frames complete all as directed |
| 17 | M&L cement concrete type B1(1:2:4) (using 20mm graded aggregate) in bed blocks or holdfasts, copings and kerbs etc complete all as specified and directed. |
| 18 | S&F 35 mm thick factory made pressed moulded panelled door of single or multi panel texured masonite moulded door fabricated using well seasoned and chemically treated solid second class hardwood styles, rails and panels made out of tubular core bonded with PF synthetic resin confirming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's colour, texture design shall be approved by GE complete ass as specified and directed. |
| 19 | M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying pink primer and one coat of synthetic enamel paint. |
| 20 | S&F 150 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, with brass screws complete all as directed. |
| 21 | S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and complete all as specified and directed. |
| 22 | S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed. |
| 23 | S&F 150 mm extruded brass handles,fabricated type polished complete all as specified and directed. |
| 24 | S&F floor door stopper of brass body and tongue and with hard drawn steel spring 140 mm long with screws. |
| 25 | M&L 18mm thick Plywood 9 layer grade BWR type BB fixed as in cupboards with screw to timber frame work . |
| 26 | M&L 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer,s instructions complete all as specified. |
| 27 | S&F Soft closing Hydraulic regular hinges automatic closing type suitable for cupboard doors of thickness 1-1.5mm high quality complete all as directed Make : Godrej or equilvalent make |
| 28 | S&F Line art Handle zinc alloy die cast with satin finish of 150mm pitch fixed in position with SS screws complete all as directed and specified. Make : Hettich or equivalent |
| 29 | S&F telescope channel soft closing of 304 Grade SS fixed in position with SS screws complete all as directed and specified.Make : Godrej or equilvalent make |
| 30 | S&F Multicolour zeebra double layered black out fabric roller blinds Rolling type including hanging mechanism water resistant, UV protection and printed on blinds DMDE crust for window etc fixed complete all as directed .Make: Vista/Amar |
| 31 | M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 |
| 32 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 33 | M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified. |
| 34 | S & F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 35 | S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain and brass fiitings and fixed complete to wall or laid in floor and Including taking down existing pipe line complete all as directed. |
| 36 | S&F 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete in all respect as specified.Make- F570008CP of Hindware or equivalent |
| 37 | S&F CP brass long swage neck bib cock complete all as specified and directed by Engineer in charge.Make- F570006 of Hindware or equivalent |
| 38 | S&F PVC connection hot & cold 15 mm bore dia 600 mm long with 2 Nos Brass nuts with washer complete in all respect as specified |
| 39 | S&F 5mm thick looking mirror bevelled edge of size 800x600 mm fixed with stainless steel fasteners complete all as specified and directed by Engr-in-Charge. Make : ATUL, Modi Float |
| 40 | M&L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement. |
| 41 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches complete |
| 42 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches, fixed to walls etc complete |
| 43 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 44 | S&F aluminium ( Die cast) body door closer hydraulically regulated designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complelte all as specified and directed.Make :- Godrej /Everite / Hardwin |
| 45 | S&F in repairs stainless steel sink of 1.2mm thick for kitchen Double Bowl Kitchen Sink (45 x 20 x 9 Inches) including waste coupling, waste pipe, plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed.Make :- Hindware or equivalent |
| 46 | S&F in repairs stainless steel sink of 1.2mm thick for kitchen single Bowl Kitchen Sink (21 x 18 x 9 Inches) including waste coupling, waste pipe, plugs, washers, bedding in cement mortar on to dwarft wall or cantilever brackets and connecting union to pipe complete all as directed.Make :- Hindware or equivalent |
| 47 | M & L for 75 mm thick cement concrete 1 : 4 :8 type D-2, (using 40 mm graded stone aggregate) as in plinth protection and making joints and filling with bitumen sand mastic including necessary form work. |
| 48 | M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300mm thick set and jointed in neat cement slurry in floors with grey cement and pigments and with 15mm thick screed bed or bedding layer in CM (1:6) including dismantling of old tiles and screed bed complete all as directed |
| 49 | S&F 12mm thick Toughened frosted/tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard/ saint Gobain |
| 50 | S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as specified and directed..Make : Godrej/Ozone |
| 51 | S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as speicified and directed. |
| 52 | Material and labour providing reinforced Cement Concrete Type B1 (1:2:4) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, waste slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 53 | Supply and fixing Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed. |
| 54 | Material and labour for use & waste of form work to soffits of suspended slabs such as roof slab,floor slab for rough finished surfaces of concrete complete all as specified and as directed. |
| 55 | M&L for Preparing Old/newly plastered surfaces and applying Co-polymer emulsion based paint for interior application (Royale Play or equivalent). Including priming over a coat of Two coat of wall putty to make surfaces smooth. |
| 56 | Supply Stainless steel used plate trolleys with wheels typically feature SS 304 grade construction, mirror polish, various shelf configurations (often 3-6 shelves or open platform), high capcity swivel casters wheels (75mm common), and range in load capacity 400kg+, with dimensions 1200x400x1200mm complete all as specified and as directed. |
| 57 | M&L preparation of old surfaces of brick, stone, concrete asbestos or plaster surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint ( plaster coat) complete. |
| 58 | M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- |
| 59 | One light/ Fan/ Bell point controlled by one way modular switch 6 Amps |
| 60 | One 3 pin 6 Amps switch socket outlet point on independent board |
| 61 | One 3 pin socket outlet 6 Amps on the same board with other switches. |
| 62 | M&L for point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core multi standard FRLS copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/Ceiling and Terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. |
| 63 | S/F modular switch one way 6 amps 1 module |
| 64 | S/F modular switch one way 16 amps 1 module |
| 65 | S/F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as directed by Engineer-in-Charge. |
| 66 | S/F modular socket out let 6A/16A - 2/3 pin combined 2 module, multipurpose type complete all as directed by Engineer-in-Charge. |
| 67 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete |
| 68 | Supply and fixing LED lights fitting 1x 20W, 220V,AC batten type fittings with extruded aluminium housing PC diffuser and integrated electronic driver connector block etc and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 69 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC white recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete |
| 70 | Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 71 | S&F MCB single pole 5 Amp to 40 Amps complete all as directed by Engr-in-charge |
| 72 | S&F MCB SPN 240 Volts 63 Amps complete all as specifed. |
| 73 | M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete all as directed by Eng-in-charge |
| 74 | M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 4 sqmm (nominal area) 1100 volts grade multistranded FRLS copper conductor with one run of 4 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 25mm outer dia complete and accessories of suitbale size as required. |
| 75 | S&F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) |
| 76 | Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed. Make: Racold/Jaquar/Havells/Bajaj/Crompton |
| 77 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. |
| 78 | Supply and fixing wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as directed by Engineer - in - charge. Make:- Bajaj/Havells/Crompton/Usha Please Enable Macros to View BoQ information |
| 79 | Supply and fixing wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as directed by Engineer - in - charge. Make:- Bajaj/Havells/Crompton/Usha Please Enable Macros to View BoQ information |
