|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (un reinforcement ) complete all as specified and directed |
| 2 | Material and Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete for chanels/drains etc complete all as specified and directed. |
| 3 | Material and Labour for 75 mm thick PCC 1:4:8(40 mm graded stone aggregate ) type D-2 as in sub base of flooring/ paver block etccomplete all as specified and directed. |
| 4 | Material and Labour sand filling (sand cushioning) under column foundaion & for interlocking tiles etc complete all as specified and directed. |
| 5 | Material and Labour for Machine pressed precast conctete interlocking glossy/ lacquer finish paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness including 2mm thick rubber mould glossy/ lacquer finish paver block of Grade M-35 complete all as specified and directed. |
| 6 | Material and labour for Factory made precast cement concrete 1:2:4 type B-1 (using 20 mm and below stone aggregate ) as in kerb stone etc factory made as approved by EIC with plane fair faces including chamfering, weathering etc complete with joint to match in CM 1:6 complete all as specified and directed. |
| 7 | Material and labour for Preparation of new kerb stone or plastered surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 8 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar. |
| 9 | Material and labour for 18-20 mm thick machine cut, Granite stone slab (of any type) (table rubbed and polished) as in steps, jambs, pillars, windows, cills, cup board shelfs etc and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and making mould on edges including cutting and holes for WHB complete all as specified and directed |
| 10 | All as per item No-9 above but Granite stone slab of 15mm thick for skirting etc and including 10 mm thick CM 1:4 backing coat complete all as specified and directed |
| 11 | Taking down cement Plaster , any description, on brick walls or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 12 | Material and Labour for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately) |
| 13 | Supply only Integral water proofing compound complete all as specified. |
| 14 | Supply and fix rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical verftical with closed top) 3 layered including all fittings i.e tank nipple, of 20mm dia Ball brass valves, high pressure, with polythene float and flynut etc hoisted and fixed in position complete all as specified and directed. |
| 15 | Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down and and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over two coats of exterior birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed.(The makes of exterior grade acrylic emulsion shall be : Asian Paints \\" Apex Ultima\\", Nerolac paints \\" Excel Anti Peel Emulsion\\", ICI Dulux \\" Weather Shield Max / Ultra Clean Emulsion\\", Berger\\"Long Life 7\\" |
| 16 | Material and Labour for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting over 2 coat of birla wall care putty and including necessary scaffoldings as reqd etc Smart painting work carried through manufacturer as per PS clause . complete all as specified and directed . (Make :- Interion grade acrylic emulsion shall be of the make : Asian paints \\"Premium Emulsion\\", Nerolac Paints \\"Beauty Gold Acrylic Emulsion, ICI Dulux \\"Super Smooth Acrylic Emulsion, Berger \\" Rangoli Acrylic Emulsion/ Equivalent). |
| 17 | Material and Labour for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over two coats of exterior birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+3 etc etc complete all as specified and directed.(The makes of exterior grade acrylic emulsion shall be : Asian Paints \\" Apex Ultima\\", Nerolac paints \\" Excel Anti Peel Emulsion\\", ICI Dulux \\" Weather Shield Max / Ultra Clean Emulsion\\", Berger\\"Long Life 7\\" |
| 18 | Material and Labour for dark shade Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed |
| 19 | All as per item No 18 above but as in skirting/ dado including 10 mm thick rendering/ backing coat of CM 1:4 etc complete all as specified and directed. |
| 20 | M&L Anodised aluminium snap grid frame of 605X605 mm Size grid work for false ceiling all as specified |
| 21 | S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 22 | M&L for 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified |
| 23 | S&F EWC Vitreous China wash down water closet pan (pedestal pattern), white/ coloured (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified. |
| 24 | Supply and Fix in repair for low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan of white / coloured complete incl brackets and 15mm bore 450mm long PVC connection all as directed. |
| 25 | Supply and fix in repair vitreous china wash hand basin (flat back or angle back type) of size 630x450mm including cutting for and pinning in ends of MS brackets of 30 cm length or erecting stand including 15mm dia CP Pillar cock, 32mm dia 1mtr PVC pipe and chromium plated waste coupling with check nuts complete all as specified and as directed. |
| 26 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed. . |
| 27 | Supply and Fix Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed . |
| 28 | Supply and Fix Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed |
| 29 | Supply and Fix pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed. |
| 30 | Supply and Fix 125 mm dia Fancy type brass CP shower rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed . |
| 31 | Supply and Fix tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed. |
| 32 | Supply and Fix PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed. Make- Prayag |
| 33 | Supply and fix stainless steel sink with drainage board kitchen bowl size 410 mm x 330 mm x 160 mm and overall size of 915 mm x 460 mm with drain board etc made out of 1 mm thick steel with plug and washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever cast iron brackets and connecting union to 1mtr long waste pipe and 40mm waste coupling etc., all as per manufacturer's instructions including taking down old drain board of any size and taken as credit complete all as specified and as directed. |
| 34 | S&F plastic water closet seat cover, white/ coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed |
| 35 | S&F for 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor in repairs complete all as specified and directed |
| 36 | S&F in repairs for 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed |
| 37 | Supply and fix for mild steel framed work as in doors or gates of angle or other section with gusset plates , rails braces , wind ties drilled for fixing of steel sheeting & incl. & hinges complete incl. mild steel plain black sheet in wall cladding, cut to size, holes punched,incl. round headed screws or rivets with plain 40mm lap of Fe 290 (gde E-165) complete all as specified and directed. |
| 38 | Supply and Fix MS Steel work in tubular/hollow sections of trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed. |
| 39 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick of any colour having tensil strength of 550 Mpa, as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 40 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of primer exposed to view surfaces complete all as specified and as directed. |
| 41 | Material and labour for preparation of old decorated surfaces of wall and applying antifungal treatement as required and applying one coats of 100% acrylic emulsion paint and filling crack with crack seal or white cement and including necessary scaffoldings complete all as specified |
| 42 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles and removing rubbish from the site complete all as specified and directed. |
| 43 | Material and labour for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 44 | Removal of building materials/debris from 1.5mtr to a distance of out side of 5.0 KM etc complete all as specified and directed. Please Enable Macros to View BoQ information |
