|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Dismantling of ceramic tiles or vitrified and plaster to making surface clean for refixing the glazed tiles including removal of malba complete in all respect and to the entire satisfaction of the Engineer in charge. |
| 3 | Dismantling of green marble/ kota/ terrazo chips from dado or flooring including removing of malba to 50 meters complete in all respect and to the entire satisfaction of the Engineer in charge. |
| 4 | Providing and laying Vitrified floor tiles of size 600 x 600 mm single charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), joining with grey cement slurry @3.3 kg kg/sqm. The groves are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Single charge vitrified tile of size 600 x 600 mm |
| 5 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS 15622 of approved make, in all colours and shades, in skirting. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), joining with grey cement slurry @3.3 kg kg/sqm. The groves are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Single charge vitrified tile of size 600 x 600 mm |
| 6 | Providing and fixing 0.5mm thick aluminium sheet at the bottom of washroom door complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 7 | Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (MARBLE) |
| 8 | Providing and laying 1st quality ceramic glazed wall tiles of size 300x450 mm conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make, in all colours, shades as approved by Engineer-in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. |
| 9 | Providing and laying antiskid ceramic floor tiles of specified size (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand). The tiles are to be fixed by provding 2 mm thick spacer. The area of spacer is to be filled by using cement based grout of approved shade. The grooves are to be filled with cemenitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire statisfaction of Engineer-in-Charge. Size of tile 300x300 mm |
| 10 | Providing and fixing wooden cabinet of 13½” deep and 2’-0\\" height with openable shutter at wall above 4’-9\\" height consisting of 18mm thick both side pre-laminated particle board with one side decorative, flat pressed 3 layer and graded (medium density), grade I, type II, conforming to IS 12823 (exterior grade) lipped with hard wood lipping of size 18mm on exposed edges include cost of piano hinges and handle, magnetic cathcer, nail, screws, synthetic adhesive etc. and fixed in position with help of wooden gutties at wall complete in all respect to the entire satisfaction of Engineer-in-charge |
| 11 | Providing and fixing of kitchen cabinet below working shelves consisting of chowkhats frame of hard wood of 2\\" x 2\\"section with one additional member with suitable rebate of 1\\" x 1/2\\" on outer side for shutter. The shutters are to be provided with 18mm thick both side pre-laminated particle board with one side decorative, flat pressed 3 layer and graded (medium density), grade I, type II, conforming to IS 12823 (exterior grade) with hard wood lipping of size 19 mm x 6 mm all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with handle and magentic catcher. The complete frame is to be fixed with fastnerst, etc. complete fixed in position to the entire satisfaction of Engineer-in-Charge. |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 13 | Providing and Fixing 35mm thick golden champ wood (kiln seasoned) wire gauge door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail wire mesh 22 x 12 mm gauge fixed with 1/2” x 3/4” golden champ wood (kiln seasoned) beading, with two vertical members in each panel to hold wire mesh, with necessary 4 Nos. of hinges 4\\", 2 Aluminium Tower bolts 8\\", 2 Aluminium Handles 5” and Aluminium door stopper and single acting door spring and complete fixed in position including two coats of paint and one coat of primer after preparation of surface (special quality) Complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length golden champ including two coats of paint and one coat of primer after preparation of surface (special quality) and removal old damaged chowkhat complete in all respects and to the entire satisfaction of the Engineer in charge |
| 15 | Providing and fixing of cupboard shutter consisting of 19mm thick commercial board with lipping all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with Alum. handle (with base plate) and magnetic catcher. The board surface is to be painted with two coats of special quality synthetic enamel paint after primer coat and preparation of surface, complete frame is to be fixed with iron nails etc. complete in all respects and to the entire satisfaction ofthe Engineer in charge. |
| 16 | Providing and fixing of cupboard shelves consisting of 19mm thick commercial ply (ISI marked) phenol bonded fixed with hard wood battens and gutties including the cost of necessary lipping screws nails feviclos and two coats of special quality paint over one coat of primer after preparation of surface complete in all respect and to the entire satisfaction of the Engineer in Charge. |
| 17 | Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2\\"x3/4\\" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 2 nos. 3\\" hinges, 2 nos. Aluminium tower bolts 4\\", Aluminium handles 1 nos., I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineerin-charge. |
| 18 | Providing and fixing 35mm thick golden champ wood (kiln seasoned) wire gauge window shutters consisting of vertical and horizontal styles 75x35mm size with wire mesh 22 x 12 mm gauge fixed with 1/2\\"x3/4\\" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 3\\" hinges, Aluminium tower bolts 4\\", Aluminium handles 1 nos., I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 19 | Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of iron hinges, all necessary Aluminium fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr., of approved brand and manufacturer, including applying additional coats wherever required, to achieve even shade and colour. Old work (One or more coats) |
| 21 | 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) |
| 22 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 24 | Providing and applying cement based putty (Birla, JK or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Providing and fixing 4mm thick plain glass panes with beading when required over existing chowkhat or fixed shutter or fixed portion or glazed shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 27 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
