|
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. (CSR 8.44) |
| 2 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. (CSR 13.65) |
| 3 | Providing and fixing mineral fibre false ceiling tiles at height upto 4 mtr With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling u (CSR 13.64) |
| 4 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm. (CSR 14.113) (a) |
| 5 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.(CSR 14.117) |
| 6 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (a)Size 600x600 mm. (CSR 14.120) (a) |
| 7 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Tile 600 x 1200 mm (DSR 2023 11.41A.1.3) |
| 8 | Scraping (c) Cement plaster (CSR 8.31) (c) |
| 9 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. (CSR 14.88) |
| 10 | Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) (CSR 14.75) |
| 11 | Dismantling brick work tile, masonry or tile lining. (b) In cement. (CSR 8.5) (b) |
| 12 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below.. (CSR 8.26) (a) |
| 13 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth (CSR 11.35) |
| 14 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. (CSR 11.6) (i) |
| 15 | 12.5mm thick cement plaster 1:4 (CSR 15.9) |
| 16 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. (B) Single Rebate (60mm x 100mm) (CSR 17.15) (ii) (B) |
| 17 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (CSR 17.27) (a) (iv) |
| 18 | Providing and fixing of 4mm thick teak ply (green/centurian make) on existing wood work and Melamine polish two or more coats to give required finish including one coat of wood filler complete in all respect. |
| 19 | Providing and fixing 5.5mm thick frosted glass of 1'x1' with ¾” x ¾” moulding with 3\\"x3\\" teak wood frame complete in all respect. (N.S) |
| 20 | Providing and fixing of Roller blinds complete in all respect.(N.S) |
| 21 | Scraping (a) White wash and colour wash. (CSR 8.31) (a) |
| 22 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement (CSR 16.65) |
| 23 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR 16.63) |
| 24 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete (CSR 16.18) |
| 25 | Providing and fixing Antique hinges 5\\" complete in all respect |
| 26 | Providing and fixing Antique handle 8\\" |
| 27 | Providing & fixing Antique tower bolt 8\\" |
| 28 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) (CSR 17.43) (c) |
| 29 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (CSR 17.22) (iv) |
| 30 | Providing and fixing of Arl kunda Antique brass i/c screws etc. complete in all respect. (N.S) |
| 31 | Providing and fixing door stopper |
| 32 | Cleaning of glass panes |
| 33 | Removal of Malba by mannual labour and Removal of office partition |
| 34 | Disposal of Malba Please Enable Macros to View BoQ information |
