|
| 1 | Scraping (a) White wash and colour wash. (CSR 8.31) (a) |
| 2 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. (CSR 13.65) |
| 3 | Providing and fixing mineral fibre false ceiling tiles at height upto 4 mtr With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.. (CSR 13.64) |
| 4 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR 16.65) |
| 5 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR 16.63) |
| 6 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(CSR 16.18) |
| 7 | providing and fixing of 4mm thick teak ply veneer (greenply/centuryply), finished with polish on existing wooden work as per design selected complete in all respect |
| 8 | Providing and fixing of wall panelling with 25 mm commercial plywood with 4 mm thich teak ply veneer, finished with melamine polish as per design selected complete in all respect. (Make greenply/merino/century) |
| 9 | Providing and fixing of partition full/low height, partly glazed & solid partition consisting of partal soft wood frame work consisting of 3\\"x2\\" partal wood, except skirting members which shall have 2x75x50mm members at required spacing of 2' c/c but not exceeding 3' in either direction or as/ site condition, finished with 4mm thick teak veneer over 6mm BWP ply on both sides complete with 15mmx20mm thick with good quality wood beading inclusive of P/F 5mm etched glass (as per approved design) in all partition complete. The rate shsall inclusive of providing and giving neat finish inclusive of polishing on all exposed wood surfaces. Also note that the ply/ laminates fixed ot the wooden frame shall have grooves of 8mm x 8mm at 400 spacing verticaly/ horizentaly as per given design. (N.S) |
| 10 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.(CSR 11.8) (i) |
| 11 | Cement concrete 1:4:8 (a) with brick balast 40mm gauge. (i) mixing by manual means. (CSR 10.10) (a) (i) |
| 12 | Dismantling brick work tile, masonry or tile lining. (b) In cement. (CSR 8.5) (b) |
| 13 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below.. (CSR 8.26) (a) |
| 14 | 12.5mm thick cement plaster 1:4 (CSR 15.9) |
| 15 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. (B) Single Rebate (60mm x 100mm) (CSR 17.15) (ii) (B) |
| 16 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick. (CSR 17.27) (a) (iv) |
| 17 | Providing and fixing Antique hinges 5\\" complete in all respect |
| 18 | Providing and fixing Antique handle 8\\" |
| 19 | Providing & fixing Antique tower bolt 8\\" |
| 20 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) (CSR 17.43) (c) |
| 21 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (CSR 17.22) (iv) |
| 22 | Providing and fixing of Arl kunda Antique brass i/c screws etc. complete in all respect. (N.S) (rate approved) |
| 23 | Providing and fixing Antique door stopper |
| 24 | Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.(CSR 14.101) |
| 25 | Removal of Malba by mannual labour |
| 26 | Disposal of Malba |
| 27 | Providing and fixing wall panelling with wooden frame of 1.5\\" batten, 12mm commercial with 4 mm thick teak ply veneer (Century/Greenply), finished with polish backing with 4mm thick PVC sheet as per design LED panel |
| 28 | Providing and fixing door profile made of laminate wood of required size and shape for wood floors (Premium Series) at edge of wooden Flooring at door entrance to eliminate level difference between existing Floor and wooden Flooring and to cover the edge of wooden Flooring with necessary nails and adhesive complete as per manufacturer's recommen dation complete. Please Enable Macros to View BoQ information |
