|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Repairs to roof treatment, joinery, flooring, plastering, plumbing and sanitary fitting including internal electrification in Bde area under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkat or frames not exceeding 1.50 Sqm each with shutters (without taking off shutters from the frames) and removing from site complete all as specified and as directed. |
| 3 | Taking down chowkat or frames exceeding 1.50 Sqm but n.exc 4.00 Sqm each with shutters (without taking off shutters from the frames) and removing from site complete all as specified and as directed. |
| 4 | Taking down shutters of any description n.exc 1.00 Sqm each and refixing in same opening complete all as specified and as directed. |
| 5 | Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and refixing in same opening complete all as specified and as directed. |
| 6 | Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed. |
| 7 | Supply only 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed. |
| 8 | S&F of steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter:- (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note:- Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 9 | S&F of steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter: (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc; complete all as specified and directed. |
| 10 | S&F of solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 11 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 12 | S&F of rolled mild steel Fe 410-W (Gde-E-250) quality-A in Joist, door frame, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified and directed. |
| 13 | S&F of 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8 complete all as specified and directed. |
| 14 | S&F of 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 15 | S&F of in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.18mm and fixed with tinned tacks of galvanised wire stapple etc wooden/fillets complete all as specified and directed. . |
| 16 | S&F of powder coated anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges and tower bolt as reqd, anodised aluminum snap beading screws etc prepared to receive glass, gauze, etc; (without sash bars), and fitted to chowkats complete all as specified and directed. Note:- Glass and wire gauge will be measured and paid separately. |
| 17 | S&F of powder coated anodised aluminium window/ventilator, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges and tower bolt as reqd, anodised aluminum snap beading screws etc prepared to receive glass, gauze, etc; (without sash bars), and fitted to chowkats complete all as specified and directed. Note:- Glass and wire gauge will be measured and paid separately. |
| 18 | S&F of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc with a minimum size of 80 x 40 mm to carry laod of aluminium door/ windows as fixed complete all as specified and directed. |
| 19 | S&F of 200 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 20 | S&F of 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 21 | S&F of 100mm size butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified & as directed. |
| 22 | S&F of 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and as directed. |
| 23 | S&F in repairs MS sliding door bolts of size 250mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 24 | S&F in repairs 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified and directed. |
| 25 | S&F in repair anodised aluminium alloy curtain rail chromium plated with fixing brackets, stops, roller etc complete all as specified and as directed. |
| 26 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed. |
| 27 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 28 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 29 | S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 30 | Taking up or down steel tubing incl connection, 15mm bore unserviceable pipe for removal to store complete all as specified and directed. |
| 31 | Taking up or down steel tubing incl connection, 20mm bore unserviceable pipe for removal to store complete all as specified and directed. |
| 32 | S&F of mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors including excavation complete all as specified and directed. |
| 33 | S&F of mild steel tubes, 20 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified and directed. |
| 34 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc; complete all as specified and directed. |
| 35 | S&F of PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 36 | S&F of PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed. |
| 37 | S&F of PVC (SWR) bends ISI marked any radius of 110 mm bore complete all as specified and directed. |
| 38 | S&F of PVC (SWR) bends ISI marked any radius of 75 mm bore complete all as specified and directed. |
| 39 | S&F of PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed. |
| 40 | S&F of PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed. |
| 41 | S&F in repairs 20mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 42 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified and directed. |
| 43 | S&F in repairs fancy type 15mm bore bib tap cast copper chromium plated long body with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified and directed. |
| 44 | S&F in repair for fancy type chromium plated stop valves, cast (angle cock) copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for bore of size 15mm complete all as specified and as directed. |
| 45 | S&F in repairs fancy type swan neck pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 46 | S&F in repairs 15mm bore CP brass mixer hot and cold for WHB/Sink complete all as specified and directed. |
| 47 | S&F in repairs vitreous china wash down water closet pan ORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc; complete all as specified and directed. |
| 48 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) \\"with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice (excluding flusing cistern and flush pipe) complete all as specified and directed. |
| 49 | S&F in repairs vitreous china wash hand basin, pedestal pattern white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket , including fixing of all fittings (excluding of pillar cock, waste coupling and pvc waste pipe )complete all as specified and directed. |
| 50 | S&F in repair vitreous china wash down water closet pan (one piece floor mount)\\"with seamless style with soft close lid complete all as specified and directed. |
| 51 | S&F of PVC connection 600mm long with brass nuts suitable for 15mm bore pipe complete all as specified and directed. |
| 52 | S&F in repairs vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. Complete all as specified and directed. |
| 53 | S&F of urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed. |
| 54 | Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 55 | M&L for PCC type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) as in parapets walls, benching, coping and filling at junction of brickwork and the like including weathering, slightly rounded or chamfered angles and throating, as directed. complete including use of forwork (straight or curved) complete all as specified and directed. |
| 56 | Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 57 | M&L for RCC 1:11/2:3 , type A-0, using 12.5 mm nominal size graded crushed stone aggregate as in chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including 5mm thick rendering in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 58 | M&L for 10mm dia mild steel TMT bars as in reinforcement, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia or occuring with clips complete all as specified and as directed. |
| 59 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed. |
| 60 | Dismantling of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc; but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 61 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 62 | - ditto- all as per item No 60 above but except bricks etc; complete all as specified and directed. |
| 63 | M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 64 | Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 65 | M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface of wall finished even and smooth without using extra cement complete all as specified and directed. . |
| 66 | M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 67 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 68 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces complete all as specified and directed. |
| 69 | M&L for preparation of new plastered and unplastered surfaces of Wall and applying two coats oil bound distemper over 1mm thick wall care putty complete all as specified and directed. |
| 70 | M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 71 | Demolition of PCC in ground floors/PCC path/plinth protection and paving not exceeding 15cm thickness (below or above ground level) etc; complete all as specified and directed. |
| 72 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed. |
| 73 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 74 | M&L for vitrified ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cement mortar 1:6 complete all as specified and directed. |
| 75 | M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 76 | M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 77 | M&L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking platforms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granitecomplete all as specified and directed. |
| 78 | M&L for machine cut kota stone slab flooring 16-18 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 20 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and directed. |
| 79 | M&L for machine cut kota stone 16-18 mm thick over and including 15 mm thick rendering in cement and sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps/ pillars/ skirting/ dado including rubbing and polishing complete all as specified and directed. |
| 80 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 81 | S&F in repais new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 1000 litres, including dismantling of unserviceable tank and removing from site complete all as specified and directed. |
| 82 | S&F in repair bib tap 15 mm standard of PTMT long body any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) complete all as specified and directed. |
| 83 | Dismantling of wall panneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed. |
| 84 | M&L for ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed. |
| 85 | S&F of 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved, complete all as specified and as directed. |
| 86 | S&F of 18mm thick prelaminated WPC, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter, kithen cabinet shutter or similar work inclding dismantling of old board in any position, complete all as specified and directed.Note:- Timber frame work for fixing of prelaminated board as in shelves is included in this item. |
| 87 | S&F in repairs brass chromium plated shower rose with or without swivel joints, 125mm size with arm including fixing to steel pipe or union complete all as specified and directed. . |
| 88 | S&F in repairs double legged floor door stopper aluminium alloy body and tongue, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed. . |
| 89 | S&F in repairs one piece toilet tank fittings set high pressure flush and fill valve kit pure ABS toilet tank parts suitable for one piece commode of 8 inch & 10 inch toilet tank repair kit fixing in position complete all as specified and directed. |
| 90 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed. |
| 91 | M&L in repair for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC casing caping with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box complete all as specified and as directed.Note :- Sunken box , hylam plate will be measured and paid separately |
| 92 | One light point controlled by one, one way switch complete all as specified and directed. |
| 93 | One fan point controlled by one, one way switch complete all as specified and directed. |
| 94 | One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and directed. |
| 95 | One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed. |
| 96 | One bell point controlled by one bell push complete all as specified and directed. |
| 97 | - ditto - all as per item No 90 here in before but 2.5 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 98 | M&L in repair for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box complete all as specified and as directed.Note:- Sunken box , hylam plate will be measured and paid separately |
| 99 | One light point controlled by one, one way switch complete all as specified and directed. |
| 100 | One fan point controlled by one, one way switch complete all as specified and directed. |
| 101 | One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and directed. |
| 102 | One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed. |
| 103 | One bell point controlled by one bell push complete all as specified and directed. |
| 104 | - ditto - all as per item No 92 here in before but 2.5 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 105 | - ditto - all as per item No 92 here in before but 4.0 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 106 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with white frame for modular fittings of required size for 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- |
| 107 | One light point controlled by one, one way switch complete all as specified and directed. |
| 108 | One fan point controlled by one, one way switch complete all as specified and directed. |
| 109 | One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and directed. |
| 110 | One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed. |
| 111 | One bell point controlled by one bell push complete all as specified and directed. |
| 112 | - ditto - all as per item No 95 here in before but 2.5 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed. |
| 113 | S&F in repair switch piano flush type single pole one way 6 Amp complete all as specified and directed. |
| 114 | S&F in repair switch piano flush type single pole one way 15 Amp complete all as specified and directed. |
| 115 | S&F in repair Bell push flush type 5 amp complete all as specified and directed. |
| 116 | S&F in repair socket out let 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed. |
| 117 | S&F in socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and directed. |
| 118 | S&F in switch modular piano flush type single pole one way 5- 10 Amp complete all as specified and directed. |
| 119 | S&F in modular switch piano type single pole one way 15 Amp complete all as specified and directed. |
| 120 | S&F in modular socket out let 2 in 1, 3 pin 15 Amp flush type complete all as specified and directed. |
| 121 | S&F in modular socket out let 2 in 1, 3 pin 5/6 Amp flush type complete all as specified and directed. |
| 122 | S&F in repair modular bell push switch one module complete all as specified and directed. |
| 123 | M&L for ceiling rose, surface bakelite 65x17.50mm of three terminals PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 124 | Taking down old unsv sub main and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper conductor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size 19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed. Note:- Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC conduit shall be measured & paid as one unit.) |
| 125 | S&F in repair LED batten tube light (4ft) for surface and pendant applications.18/ 20 watt, Colour Temp 3000 K 5000 K complete all as specified and directed. |
| 126 | S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Colour Temp 3000 K 5000 K complete all as specified and directed. |
| 127 | S&F in repair PVC insulated aluminium 6 Sqmm 2 core sheathed cable complete all as specified and directed. |
| 128 | S&F in repair modular switch 6 Amp 250 V AC one way one module as per suitability of Frame already existing on work site complete all as specified and directed. |
| 129 | S&F in repair modular switch 16 Amp 250 V AC one way with indicator one module as per frame suitability already existing on work site complete all as specified and directed. |
| 130 | S&F in repair modular socket, 6A - 2/3 pin combined 2 module as per frame suitability already existing on work site complete all as specified and directed. |
| 131 | S&F in repair modular socket 6A/16A - 2/3 pin combined 2 module on work site complete all as specified and directed. |
| 132 | S&F in repair modular fan regulator step type, 100 - 2 module on work site complete all as specified and directed. |
| 133 | S&F in repair in repair metal flush mounting box of 1/2 module complete all as specified and as directed. |
| 134 | S&F in repair in repair metal flush mounting box of 3 module complete all as specified and as directed. |
| 135 | S&F in repair in repair metal flush mounting box of 4 module complete all as specified and as directed. |
| 136 | S&F in repair in repair metal flush mounting box of 6 module complete all as specified and as directed. |
| 137 | S&F in repair in repair metal flush mounting box of 8 module complete all as specified and as directed. |
| 138 | S&F in repair white cover plate with frame, 1 module complete all as specified and as directed. |
| 139 | S&F in repair white cover plate with frame, 2 module complete all as specified and as directed. |
| 140 | S&F in repair white cover plate with frame, 3 module complete all as specified and as directed. |
| 141 | S&F in repair white cover plate with frame, 4 module complete all as specified and as directed. |
| 142 | S&F in repair white cover plate with frame, 6 module complete all as specified and as directed. |
| 143 | S&F in repair white cover plate with frame, 8 module complete all as specified and as directed. |
| 144 | S&F in repair electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan complete all as specified and as directed. |
| 145 | S&F in repair PVC/Polycarbonate lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittings complete all as specified and as directed. |
| 146 | S&F in repair PVC gang box for mounting switches 01 module complete all as specified and as directed. |
| 147 | S&F in repair PVC gang box for mounting switches 02 module, complete all as specified and as directed. |
| 148 | S&F in repair PVC gang box for mounting switches 06 module, complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
