|
| 1 | Dismentalling and removing old grading concrete from roof slab including removing the debris away from the worksite cleaning the surface including cost of all laburs T&P etc. required for the work in all respect as per specification and direction of the Engineer-in-Charge. |
| 2 | Providing 4cm thick grading concrete with C.C. (1:2:4) on roof slab using 12mm size and down graded crusher broken hard granite chips including all cost, conveyance, royalty and taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 3 | Earth work in excavation in foundation in all kinds of soil including earth mixed with boulder (except sheet rocks and boulder requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour ,T&P and dewatering if required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 4 | Supplying filling in foundation and plinth with sand in layers not exceeding 22.5cm (9\\") thick including watering and ramming with cost conveyance, royalities, taxes of the materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 5 | Providing Cement Concrete (1:3:6) with 40 mm down graded of crusher broken hard granite stone aggregate of approved quality from approved quarry for cement concrete work including hoisting, lowering and laying in position in layers with proper packing and ramming by means of vibrator to proper slope and level including cost of curing for 28 days, conveyance, royality , taxes of all materials required for the work, running and hire charges of machineries and all T & P required for the work, labour charges for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 6 | R.C.C. work in C.C. M-20 using 12 mm to 20mm size (20 mm not be exceed 25%) hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, laying & compacting concrete watering and curing for 4 weeks including smooth, rigid centering, shuttering & finishing the exposed surface smooth with cost, conveyance, royalities and taxes of all materials and labour, T& P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or tor steel and binding wire and labour charges for straightening, cutting, beinding, binding etc. and tying the grills and placing in proper position as per direction of the Engineer-in-charege.a). Column Base & Foundation |
| 7 | b). Plinth Bend |
| 8 | c). Column |
| 9 | d). Wall Beam |
| 10 | e). Roof slab |
| 11 | f). Lintel |
| 12 | g). Chajja |
| 13 | i). Drain |
| 14 | Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specification Clauses 1000 and 1200 of MoRD and as per direction of the Engineer-in-Charge. |
| 15 | Fly ash brick masonary in cement mortar (1:6) in foundation and plinth and basement and ornamental flower bed plinth moulding and similar such types of works with all necessary projections using fly ash . bricks of 9\\"/10\\" size having a crushing strength of not less than 35kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 16 | Fly ash brick masonary in cement mortar (1:6) in superstructure using fly ash bricks of 9\\"/10\\" size having a crushing strength of not less than 35kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 17 | 32 mm both side laminated factory made Flush door shutter including cost of fitting , fixtures and labour for fixing in position etc. complete as per specification and direction of the Engineer-in-Charge. |
| 18 | Providing & fixing WPC Door frames with rebate cuts & finished cross section size 75 mm x 45 mm or 90 mm x 50 mm including cost of all materials cost of all labour, conveyance, taxes loadig, unloading, T&P etc. complete as per direction by the Engineer-in-charge. |
| 19 | Providing & fixing UPVC (FINESTA / NCL / VEKALTD etc three track three panell sliding window 60 series duly manufactured using UPVC reinforced profile of 108 mm x 45 mm x 2.5mm for outer frame and window sash 39 mm x 58 mm x 2.500 profile capable of mounting single glazing system including cost of all materials cost of all labour, conveyance, taxes loadig, unloading, T&P etc. complete as per direction by the Engineer-in-charge. |
| 20 | 12mm (1/2\\") thick cement plaster (1:6) finished smooth to outside brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 21 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curing with cost, conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 22 | Providng and fixing Ceramic tiles in floors treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with all cost, conveyance, taxes of marble / tiles , labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 23 | Providing and fixing Vertified tiles in dados, skirting and riser of steps on 12mm thick cement mortor (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles inlcuding rubbing and polishing with all cost, conveynace, taxes of marble / tiles labour with T& P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 24 | Providing, fitting and fixing of M.S. Door, M.S Windows, M.S. Grills ,M.S. Grill Gate and Collapsible Gate with top and bottom rails in proper position including making holes in walls, RCC structure and wood work in proper position etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with CC (1:2:4) with hard black crusher broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost ,conveyance, royality, taxes of all materials, labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 25 | Finishing walls with weather coat of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge. |
| 26 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade including scaffolding staging charges with cost conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification & direction of the Engineer in charge. |
| 27 | Finishing wall surface of wall with Acrylic wall putty of approved make and finished smooth and even surface to relive painting including cost of scaffolding staging charges with cost of all materials taxes labour T & P etc. complete. |
| 28 | Supplying, fitting and fixing of G.C.I. Sheet in roof with cost, conveyance, taxes of G.C.I. sheets but excluding cost of fittings and labour with T & P required for the work etc. complete as per specification and direction of the Engineer-in-Charge. |
| 29 | Iron work wrought and putup in grated doors, window and cage latrines including cost, conveyance royalities and all taxes of all materials along with T&P required for the ye work in all respect as per direction of Engineer-in-chage. |
| 30 | Supplying fitting and fixing of stainless steel of 304 grade in hard railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mmx32mmx2mm @ .90 mtr c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing , polishing etc with cost conveyance taxes of all materials labour T&P required for the work etc complete. |
| 31 | 20mm(3/4\\") thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brush laid to proper slope finished smooth to receive tarfelt treatment watering and curring including cost ,conveyance, royality , taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 32 | Painting two coats with any approved enamel paint to new wood work and iron work including cost of the primer and paint sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 33 | Providing Cement Concrete (1:2:4) with 12 mm size C.B.H.G chips of approved quality from approved quarry including hoisting, lowering,laying in layers not exeeding 150 mm thick with proper packing & ramming by means of vibrator to proper slope & level including curing with cost, conveyance, royality, taxes, labour with T& P required for the work etc. complete as per specification and direction of the Engineer in charge. |
| 34 | Earthwork in embankment in ordinary soils from approved borrow areas with all lead and lifts over intial lead and lift and laying on properly prepared surface including spreading, levelling the earth not exceeding 30 cm in layers, Sectioning, Watering for finished item of work including all cost, royalty, labour, T & P article required for the work etc. Complete as per the specification and direction of the Engineer-in-Charge. |
| 35 | Providing fitting and fixing of wall paneling aluminium section B9835 as Horizontal and vertical member placed @600 mm C/C covered with 18 mm thick WPC bouard plain colour and 4 mm thick veneer of approved quality with melamine polish with all cost, labour T&P required for the work etc. complete as per direction of Engineer-in-charge. |
| 36 | Providing fitting and fixing of Gypsum board with Aluminium anodised T section No. 3115 with 2'-0\\" center to center , \\" section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'-0\\"x2'-0\\" with Gypsum board suspended from ceiling etc. complete as per specification and direction of Engineer in charge. |
| 37 | Providing, supplying, fitting and fixing of 80 mm thick interlocking concrete paver block on compacted river coarse sand free from all organic materials and filling the joints with sand including cutting, corbelling, splayes whereever necessary to proper size with cost, conveyance , royalities of all materials and as directed by Engineer-In-Charge. |
| 38 | E.I. WorkRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )'-do- Group-A |
| 39 | -do- Group-B |
| 40 | -do- Group-C |
| 41 | Recessed wiring to Fan Point in... Group-B |
| 42 | Group-C |
| 43 | Recessed wiring to Call Bell Point in... Group-C |
| 44 | Recessed wiring to Exhaust Fan Point inGroup-B |
| 45 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 46 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 47 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 48 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 49 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 50 | Sub-MainSupply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface / recessed STEEL/PVC conduit as required. ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). (Rewiring) -do- 2x1.5sqmm +1x1.5sqmm ( 1.19.2 + 1.19.1 ) |
| 51 | -do-2x2.5sqmm +1x1.5sqmm ( 1.19.11 + 1.19.1 ) |
| 52 | -do-2x4sqmm +1x1.5sqmm ( 1.19.11 + 1.19.1 ) |
| 53 | 4x4+2x2.5(1:8:9) |
| 54 | 4x6 sqmm+2x2.5 sqmm(1:8:10) |
| 55 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 56 | Circuit Breakers S/F of 'C' series SP MCB of 6 /10A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 57 | S/F of 'C' series 4P MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 58 | S/F of 'C' series DP MCB of 16 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 59 | S/F of 4Way (8+12) TPN Double Door Distribution Board ISI marked complete with all accessories and connection etc. as required (Make : Legrand / Hager / Scheider / Seimens) |
| 60 | EarthingEarthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 61 | Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18) |
| 62 | S/L of 25 mm x 5 mm Cu. Earth strip in 40 mm dia G.I. Pipes (3.11) |
| 63 | FittingsSupply and fixing of 230mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 64 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 65 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic) |
| 66 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 67 | S/F step type modular fan regulator |
| 68 | S/F of 2000VA/24V Invertor machine with 2 nos 180Ah tall tubular Battery including Trolly (Make-Luminous /microtek/v-guard) |
| 69 | S/F of 15A socket on 2Modular Board board for A.C |
| 70 | S/F of 32 A Flush type D.P. Switch for A.C. (Make : Cona / Anchor) |
| 71 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 72 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 73 | S/F of 1.5 T 3 Star Inverter Model Split Type AC Machine (Make- Hitachi/Blue Star/Carrier/Daikin/LG/Mitsubishi/O-General) |
| 74 | S/F of 4KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard |
| 75 | S/F of Modular Cover Plate of following module complete (Make: Anchor Penta / Cona)1/2 Modular Cover Plate. |
| 76 | 8 Modular Cover Plate. |
| 77 | 12 Modular Cover Plate. |
| 78 | S/F 5/6 A.F.T Switch (Modular type) (1.25.1) |
| 79 | S/F of Urea Ceiling Rose ISI marked (Make: Cona / Anchor) (1.28) |
| 80 | S/F of Angle Holder ISI Marked (Make: Cona / Anchor) (1.29) |
| 81 | Supply & fixing of 63 A TPN Panel board 1. 63A MCCB (Make : Legrand / Hager / Scheider / Seimens)-1No.2. TPN Busbar-1set with DC Gland for 25mmsq aluminium armoured cable and 3. 4Pole Spreaders link (63A-200A)4. 63Amp 4P Changeover-1No.5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 82 | CablesProvision of Armoured cable size 2x6sqmm (15) |
| 83 | Provision of Armoured cable size 3 1/2 x 25sqmm (24) |
| 84 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 85 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 86 | S/F of 50mm HDPE pipe for laying of cable & protection. |
| 87 | S/F of 40mm HDPE pipe for laying of cable & protection. |
| 88 | Provision of 2.5mmsq 3 core PVC insulated and FR PVC Round sheathed Copper conductor (Flexible industrial cable),1100 volt conforming to IS 694 (Make: Polycab/ KEI / Havells) |
| 89 | Supply of 15 KVA DG Set with AMF control panel and Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacture's work, packing, supply unloading / transportation/ handing / storage at site, assembly at site, installation including tuchup painting, hook-up pre-commissioning, commissioning, inspection and testing of the complete supply of all erection and commissioning spares, special tools and tackkes (as required) instrumentation all Auxiliaries, exhaust system and silencer, Fuel Tank, Fuel piping with good quality change over, metering panel with CT Meter complete with all connection etc. with inspection certificate from electrical inspector and as per Direction of Engineer-in-charge. (Make: Kirloskar / Jakson / Mahindra) |
| 90 | Installation of 15 KVA DG Set with required foundation and shed for DG set complete etc. |
| 91 | Area lightingsSupply & Instalation of 6 meter HDG octagonal Pole (Top 70 mm & Bottom 130mm of 3 mm thick) with double arm detachable ring type Bracket suitable to hold the light fitting on 1500mm long beacket . The Base Plate (220X220X12mm) with 4 nos of plinth Foundation bolts(20 mm dia 600mm Length) to be mounted on concrete Foundation (1.5'X1.5'X4' high) usng HYSD steel reinforced for errection of Pole firmly as per direction of Engineer in Charge. (Make: Utkarsh/RR Ispat/Vakrangee) |
| 92 | CCTV Camera & Fire Fighting SystemSupply, Installation, Testing & Commissioning of Full High Definition 5MP( 2560 x 1440) resolution vandal proof dome/bullet camera, 1/2.7\\" Progressive Scan CMOS Sensor, IR Cut mechanical Filter for True Day & Night vision, Support dual streams, Onvif supported, IP66 Weather proof outdoor enclosure, Inbuilt Smart IR LEDs with intensity control, IR 30 mtr, H.264 / H.265, Supports android and iOS APP for Smart phone and tablets, -30°C ~60°C, CE, FCC, RoHS . Make-Honeywell Impact Series/Hik Vision Prama/UNV. |
| 93 | Supply , Installation, testing , commissioning of 8 Channel NVR with 2 SATA; 200 Mbps incoming bandwidth, Up to 12 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS). Make-Honeywell Impact Series/Hik Vision Prama/UNV. |
| 94 | Supply & Installation of surveliance 8 TB HDD . Make: WD/ Segate/ Toshiba |
| 95 | Supply and installation of 8 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 270 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/Netgear/HP |
| 96 | Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU, Cable manager and H/W Pkt. Make : Netrack/Valrack/Rittal/APW |
| 97 | Supply and fixing of 6U/500D Wall Mount Rack with 1XFAN, 1X 6skt 6/16amp PDU and H/W Screw Pk. Make: Legrand/Valrack/Netrack |
| 98 | Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit, Make: Legrand/Systimax/Panduit |
| 99 | Supply & laying of 20 Sqmm PVC Pipe conduit on wall Complete in all respect as per the direction of engineer in charge Make-AKG/BEC/Precision/Norpak /Anchor. |
| 100 | Supply & laying of 25 Sqmm PVC Pipe conduit on wall Complete in all respect as per the direction of engineer in chargeMake-AKG/BEC/Precision/Norpak /Anchor. |
| 101 | Supply & fixing of Cat6 24 Port Loaded Patch Panel:Make: Legrand/Systimax/Panduit/Digisol |
| 102 | Supply & Installation of Cat6 Factory crimpped moulded patch cord, 1mtr. Make: Legrand/Systimax/Panduit |
| 103 | Supply and installation of HDMI Cable, 10mtr Make: Tyco-AMP/ Legrand/ Digisol. |
| 104 | Supply and Installation of 32\\" UHD (3,840 x 2,160) TV with 300 nits brightness,10W+10W Audio Output,Crestron Connected®, NTP sync timer, BEACON, Embedded CM (contents manager), Soft AP, WiFi , Screen Share (Miracast), DIAL, Bluetooth Audio Playback,Hotel Mode , Welcome Screen (Splash Image), Insert Image, One Channel Map, IP Channel Manager, External Speaker Out , Remote jack pack, Moving Picture Playback, Auto Off / Sleep Timer,Smart Energy Saving, Motion Eye Care,USB Cloning, WOL, Interface : Set Side - HDMI In 3, USB 1, CI Slot, RF In, Digital Audio Out (Optical), RS-232C, RJ45 , External Speaker Out,Power Consumption(Typ.)-145 W, with 3years Warranty including the cost of labor & material T & P as required as EIC. Make:Samsung/Sony/LG |
| 105 | Wireless Mouse.Make-Logitech |
| 106 | Supply & fixing of PVC 4x4 Box. |
| 107 | 5 Amp Power Point |
| 108 | Supply and fixing of Key Stone for Connection of Camera. |
| 109 | FIRE EXTINGUISHERS :Providing & fixing ABC type (Dry powder type ) extinguishers. Including all accessories as per IS specification (IS :15683) Consisting of welded MS cylindrical body with discharge hose ,discharge valve ,suspension brackets,initial filling etc. complete as required., initial filling etc complete as required. Capacity - 6 kg . Make : Fireshiled/ Kanex/ Safex/Flame Klog |
| 110 | Providing & fixing Water based Carbon-di-oxide 4.5 ltrs. fire extinguishers as per IS specification consisting of welded MS cylindrical body ,squeeze lever discharge valve fitted with internal discharge tube ,30 cm long high pressure discharge hose ,discharge nozzle,suspension brackets,finished exteranally with red enemel paint and fixed to wall with brackets with rawl plug/dash fastners complete with initial charging. Make : Fireshield/Kanex/ Safex/ Flame Klog |
| 111 | P.H. Work10 user septic tank Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC. Initial lift upto 1.50m |
| 112 | From 1.50m to 3.00m depth |
| 113 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 114 | Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 115 | Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 116 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC |
| 117 | Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 118 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 119 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 120 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 121 | Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 122 | Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 123 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 124 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 125 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 126 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 127 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 128 | Dismantling and removing old tiled flooring including removing the old base and stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C |
| 129 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.Ground Floor Wall |
| 130 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall |
| 131 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor |
| 132 | Supplying all materials,labour,T&P and fixing the PVC door frames to be made up of PVC profiles of size 40x48mm,the vertical profiles to be joined with the horizontal ones,after inserting MS/Fibre 'L' angles of size 200x100mm and self tapping screws,One meter long reinforcement to be provided along the side of the frame where the door is to be hung,to be fixed to the wall with steel screws and PVC royal plugs etc. all complete as per specification and direction of the E.I.CDoor - Frame |
| 133 | Supplying all materials,labour,T&P and fixing the Factory made single leaf rigid PVC sand witch composite door shutter of 32mm thick laminated with two PVC screens with wood grain finish plastic door shutters to be made up of selected PVC profiles, the stiles and the rails to be made up of sections measuring 24x59mm the pannels to be provided of size 200x20mm, lockrail to be provided horizontally at the required place for strength and firmness,measuring approximately 24x100mm,all four corners to be provided with M.S/Fibre 'L' Angles of the size 200x100mm fitted with steel screws,the door to be hung to the frames with the help of 100mm SS. hinges and self tapping screws,etc. all complete as per specification and direction of the E.I.CDoor - Shutter |
| 134 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall |
| 135 | 375mm thick wall |
| 136 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 137 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 138 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. |
| 139 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) |
| 140 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra) |
| 141 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe |
| 142 | 110mm dia U-PVC S. Trap |
| 143 | 110mm dia U-PVC P. Trap |
| 144 | 110mm U-PVC S/J with Door |
| 145 | 110mm U-PVC door bend |
| 146 | 110mm dia U-PVC Plain bend |
| 147 | 110mm U-PVC Plain Tee |
| 148 | 110mm U-PVC Cowl |
| 149 | 125mm dia CP Grating |
| 150 | 75mm dia U-PVC SWR Pipe |
| 151 | 75mm dia U-PVC Plain Tee |
| 152 | 75mm U-PVC Door Bend |
| 153 | 75mm U-PVC Plain Bend |
| 154 | Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC610x510x200 mm Stainless Steel kitchen Sink heavy good quality |
| 155 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra ) |
| 156 | WHB-Padestrail |
| 157 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality |
| 158 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Ambar make . |
| 159 | CP Towel ring heavy Stainless steel with mousoumi make . |
| 160 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 161 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Ambar make) (Shower+Arm) |
| 162 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality |
| 163 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra ) |
| 164 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 165 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 166 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.0.91m dia x 2.10m deep |
| 167 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 168 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing |
| 169 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 20 mm dia C-PVC Pipe( Internal) |
| 170 | 25mm dia C-PVC Pipe (external) |
| 171 | 40mm dia C-PVC Pipe (external) |
| 172 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock Plaza/Amber Deluxe |
| 173 | 20mm dia cp concealed stop cock Plaza/Amber Deluxe |
| 174 | 15mm dia cp angle stop cock Plaza/Amber Deluxe |
| 175 | 15mm dia cp bib cock S.B. Plaza/Amber Deluxe |
| 176 | 15mm dia cp bib cock L.B. Plaza/Amber Deluxe |
| 177 | 15mm dia CP Two way bib Cock Plaza/Amber Deluxe |
| 178 | Health Fuccet Plaza/Amber Deluxe |
| 179 | 15mm dia CP flange Plaza/Amber Deluxe |
| 180 | 15mm dia CP Extension piece Plaza/Amber Deluxe |
| 181 | 25mm dia Brass Ball Valve |
| 182 | 40mm dia U-PVC Ball Valve[Metal Ball] |
| 183 | Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 1000 lit sintex tank (1st Floor) |
| 184 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.1000 ltr capacity tank 1st floor |
| 185 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. Please Enable Macros to View BoQ information |
