|
| 1 | PART A (WITH ITC AVAILABILITY) |
| 2 | GM OFFICEUp keeping of inside office/ service / welfare buildings including: a) Cleaning of floors by brooming and mopping, walls ceiling, partitions, chairs, tables, almirahs, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. once in a day in the office building daily in all working days. (b) Cleaning of bathroom / toilets once in a day with water, detergent, phenyl etc. daily in working days inclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In-Charge.Scope of work: The Agency has to engage 8 Nos of unskilled labour per day throughout the year |
| 3 | Maintenance of lawn, garden, flower beds, potted plants, plants and trees, planting of new plants / new lawns as and where required including watering, removal of weeds, wild vegetation etc, manuring, putting good earth, fertilisers, applying pesticides at various locations etc. as per the direction of Engineer-In-Charge. (Cost of plants, manure, good earth, etc. to be paid for separately. However, cost of tools & plants, flexible pipes, fertilisers and insecticide / pesticides are included in the item and is to be arranged by the contractor. The water supply point shall be provided at one point at each separate location by the department.). NOTE: The payment to the workmen shall be made through any nationalised bank Scope of work: The Agency has to engage 1 Nos of unskilled labour and 1 Nos semi skilled labour (Mali) per day throughout the year |
| 4 | Supplying of manure and pesticides/insectisides in a phased manner as per requirement as per direction of Engineer In charge :Urea |
| 5 | Supplying of manure and pesticides/insectisides in a phased manner as per requirement as per direction of Engineer In charge :Gromor 28-28-0 |
| 6 | Supplying of manure and pesticides/insectisides in a phased manner as per requirement as per direction of Engineer In charge : |
| 7 | Upkeeping of concrete pavement/ Black topped roads excluding coal transport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge. |
| 8 | Cleaning and brooming of floor areas like chequered tiles, paver block, IPS floors, including applying water, detergents etc adequately all complete as per the direction of Engineer-In-Charge. Scope of work: The Agency has to engage 7 Nos of unskilled labour per day throughout the year |
| 9 | Supplying and providing harpic solution or its equivalent approved brand for cleaning of toiletes as and when required basis as directed by Engineer-in-Charge. (500 ml bottle) |
| 10 | Supplying and providing Soap based multi-use cleanser and deodorant (BENGAL CIIEMICALS tiger brand white phenyl or its equivalent approved brand) in sealed container(s) of 500ml capacity and distributing the same to all residential quarter(s) and service building(s) as directed by Engineer-in-Charge. |
| 11 | Supply and providing of black phenyl (BENGAL CHEMICAL Lamp brand) or its equivalent approved brand in sealed container of 450 ml capacity as per direction of Engineer-in-charge. |
| 12 | Supply of Odonil as per direction of EIC |
| 13 | Supply of Napthalene Ball as per direction of EIC |
| 14 | Supply of Detergent as per direction of EIC |
| 15 | Trimming of trees & cutting of dead part of trees in colony,near other structures etc and disposal of the same at an appropriate place as per instruction of Engg I/c. |
| 16 | Cleaning of toilets (not attached to office / service or werlfare buildings), its floor and dados including applying of phenyle, napthalene balls, harpic, detergents etc as per the direction of Engineer-In-Charge. (Cost of Phenyle, naphthalene balls, harpic, detergents etc. to be paid separetely)Scope of work: The Agency has to engage 2 Nos of unskilled labour per day throughout the year |
| 17 | Disposal of dead animals like street dog,pigs,cat etc. as an when required including digging of pits and buring the same as per instrution of engineer in charge |
| 18 | Disposal of dead animals like cow,ox,Buffalow etc. as an when required including digging of pits and buring the same as per instrution of engineer in charge |
| 19 | Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) |
| 20 | Cleaning of Drains without siltation or sludge deposition: Open Surface drain above 250 mm width. |
| 21 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge. |
| 22 | Removal of chokage / blockage of sewer lines by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge. |
| 23 | Cleaning of septic tank with removal of sludge night soil etc complete and putting the waste materials by digging pit within a distance of 1km and coverring the same as per the instruction of Engg-in-charge |
| 24 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 25 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 16 mm |
| 26 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 27 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 28 | Bright finished or black enameled mild steel screws 20 mm |
| 29 | Bright finished or black enameled mild steel screws 25 mm |
| 30 | Bright finished or black enameled mild steel screws 30 mm |
| 31 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 33 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 34 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm |
| 35 | Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms |
| 36 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.10 litre capacity - white |
| 37 | Providing and fixing white vitreous china water closet squatting pan(Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 38 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 39 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm |
| 40 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 41 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 200x10 mm |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal dia Pipes |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 44 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes screwed with M.S. screws of required length etc. complete. 110 mm |
| 45 | Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 48 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.32 mm dia |
| 49 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 50 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 52 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete |
| 53 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 54 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete :White solid plastic seat with lid |
| 55 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 56 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 57 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 58 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 59 | By Mechanical Transport including loading,unloading and stackingLime, moorum, building rubbish Lead - 5 km |
| 60 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 61 | Providing and fixing white vitreous china pedestal type (Europeantype/ wash down type) water closet pan. |
| 62 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 63 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 64 | Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia |
| 65 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 66 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 67 | Day to day maintenance of carpentry works by engaging one skilled carpenter and one unskilled Helper as per direction of EIC |
| 68 | Day to day maintenance of water supply net work and plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. |
| 69 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size. |
| 70 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. |
| 71 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 72 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of SOMANY or other approved makeapproved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(300x600mm wall tiles) |
| 73 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 74 | Removing of damage glass panes & providing and fixing black /brown glass panes in door /window with sliding glass runner, rubber and necessary screws fitting as per instruction of Engineer-Charge. |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 76 | Providing polyethylene water storage tank cover as per instruction of Engineer-in-charge. |
| 77 | Cleaning of existing mosaic floor/marble/tile floor with water detergent including brushing and cleaning of existing floor with wire brushes brooms etc. for change of occupancy in quarters as per instruction of Engineer-in-charge |
| 78 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 79 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 80 | Providing and displaying of Croton Golden having ht. 45 cm to 60 cm with 2 to 3 branches, well developed, fresh and healthy foliage in 25 cm size of Earthen pot/Plastic pot as per direction of the officer-in-charge. |
| 81 | Providing and displaying of Dieffenbachia Tropic-snow having ht. 60 cm & above with 8 - 10 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 82 | Providing and Displaying Petunia hybrid different colour single well developed in full bloom in 20 cm Earthen/Plastic Pot and as per direction of the officer-in-charge. |
| 83 | Activities in arrangement of independence Day, Republic Day,MCL foundation Day, Coal India foundation Day, Workers Day, Dr B. R Ambedkar Jayanti and Other Miscellaneous Work at GM office as per Instruction of E/C. |
| 84 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend |
| 85 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 86 | Cleaning of Drains without siltation or sludge deposition: Open Surface drain up to 250 mm width. |
| 87 | Providing and fixing 15 mm CP brass pillar tap of approved quality by (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 88 | Providing and fixing C.P. towel rod size 600x20mm with C.P. brass screws to be approved by Engineer-in-Charge (PLAZA brand or equivalent) as per instruction of Engineer-in-charge. |
| 89 | Providing PVC low level cistern handle as per instruction of Engineer-in-Charge. |
| 90 | Providing PVC low level cistern ballcock 15mm dia as per instruction of Engineer-in-Charge. |
| 91 | Providing M-seal adhesive or equivalent (in packets of 100 gm) as per instruction of Engineer-in-Charge. |
| 92 | Providing CPVC Tank nipple 25MM dia of approved quality as per instruction of Engineer-in-charge |
| 93 | Providing and fixing CP Health Faucet with CP Tube & Hook set and Bib cock two in one quater turn of Jaquar make or approved equivalent quality complete set i/c cost of labour and materials complete as per instruction of EIC. |
| 94 | Providing PVC VALVE 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 95 | Providing CPVC SOCKET - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 96 | Providing CPVC UNION - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 97 | Providing CPVC TEE - 25mm dia of approved quality as per instruction of Engineer-in-charge |
| 98 | Providing CPVC PLAIN ELBOW- 32mm dia of approved quality as per instruction of Engineer-in-charge |
| 99 | PART B (WITHOUT ITC AVAILABILITY) |
| 100 | DAV SCHOOLCleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC (Upto 2000 Litre capacity) |
| 101 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 102 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm |
| 103 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete.10 litre capacity - white |
| 104 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 105 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm |
| 106 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 107 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 200x10 mm |
| 108 | Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore |
| 109 | providing and fixing on wall face unplasticied Rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seel ring conforming to IS 5382 leaving 10mm gap for thermal expansion (i)Single socketed pipes ,110mm diameter. |
| 110 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.32 mm dia |
| 111 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 112 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 113 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete |
| 114 | Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 115 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 116 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 117 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 118 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 119 | Renewal of old putty of glass panes (length) |
| 120 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend |
| 121 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 122 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes. |
| 123 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes. |
| 124 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes. |
| 125 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 126 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour: Old work (one or more coats) |
| 127 | Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
| 128 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 129 | Central Colony DispensaryClearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 130 | Up keeping of inside office/ service / welfare buildings including: a) Cleaning of floors by brooming and mopping, walls ceiling, partitions, chairs, tables, almirahs, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. once in a day in the office building daily in all working days. (b) Cleaning of bathroom / toilets once in a day with water, detergent, phenyl etc. daily in working days inclusive of Cost of detergents and other toiletaries as per the direction of Engineer-In-Charge.Scope of work: The Agency has to engage 1 Nos of unskilled labour per day throughout the year |
| 131 | Cleaning and brooming of floor areas like chequered tiles, paver block, IPS floors, including applying water, detergents etc adequately all complete as per the direction of Engineer-In-Charge. Scope of work: The Agency has to engage 1 Nos of unskilled labour per day throughout the year |
| 132 | Maintenance of lawn, garden, flower beds, potted plants, plants and trees, planting of new plants / new lawns as and where required including watering, removal of weeds, wild vegetation etc, manuring, putting good earth, fertilisers, applying pesticides at various locations etc. as per the direction of Engineer-In-Charge. (Cost of plants, manure, good earth, etc. to be paid for separately. However, cost of tools & plants, flexible pipes, fertilisers and insecticide / pesticides are included in the item and is to be arranged by the contractor. The water supply point shall be provided at one point at each separate location by the department.). NOTE: The payment to the workmen shall be made through any nationalised bank. Scope of work: The Agency has to engage 1 Nos of unskilled labour and 1 Nos semi skilled labour (Mali) per day throughout the year |
| 133 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 134 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm |
| 135 | Carriage of MaterialsBy Mechanical Transport including loading,unloading and stackingLime, moorum, building rubbish Lead - 5 |
| 136 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 137 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 138 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 139 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia |
| 140 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 141 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms |
| 142 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 143 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 144 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal dia Pipes |
| 145 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 146 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 147 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 148 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :25 mm dia (heavy type) |
| 149 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 150 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 151 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (one or more coats applied @ 0.83 Itr/10 sqm) |
| 152 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 153 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:One or more coats on old work |
| 154 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 155 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 156 | Re-lettering with black Japan paint of approved brand and manufacture. |
| 157 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 158 | Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 159 | Providing and Displaying Marigold(Tagetes) inca hybrid different colour having 30 cm and above ht., with 6 to 8 flowers in bloom & blooming condition, well developed pot should be fully covered with fresh and healthy, foliage and flowers in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 160 | Providing and Displaying Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge. |
| 161 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
