|
| 1 | NS ITEMS |
| 2 | Providing and fixing of INDOOR BADMINTON SPORTS FLOORING- 8.0MM THICKPRE-MARKED (PREMIUM)- GEM complete in all respect as per satisfaction of Engineer In-charge. As per followong specifications Sport: BadmintonLength*Width: 15m*1.8m*4 RollsColor: GreenService life: 10 yearsApplication: Indoor Badminton CourtMaterial: 100% PVCWarranty: 3 years Make: Carlton/Yonex/Vooxe |
| 3 | Providing and fixing indoor wooden sports flooring for badminton court using kiln seasoned and treated imported hardwood boards of 20–22 mm thickness, tongue and groove type, factory pre-finished with minimum 7 coats of UV lacquer, laid over an under-frame system of seasoned Pine / Fir / Spruce wooden runners (approx. 63 mm × 38 mm) fixed with 19 mm thick shock-absorbing air-cushion pads at suitable spacing. |
| 4 | Supplying, installation, testing and commissioning of Commercial Grade Motorized Treadmill, conforming to EN-957 / ISO 20957 standards, having heavy-duty MS powder-coated frame, 3.0 HP AC continuous duty motor (peak 6.0 HP), running belt size not less than 1400 × 500 mm with multi-ply orthopaedic cushioning, speed range 1–18 km/h, motorized incline 0–15 levels, max. user weight 150 kg, LED/LCD display indicating speed, distance, time, calories, heart rate (with hand-pulse sensors), pre-set workout programmes, emergency stop key, transportation wheels and safety side rails. Including freight to site, loading/unloading, complete erection, levelling on rubber pads, trial run, demonstration to user staff and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 5 | Supplying, installation, testing and commissioning of Commercial Grade Upright Exercise Bike conforming to EN-957 / ISO 20957 standards, with heavy-duty MS powder-coated frame, flywheel of minimum 6 kg, magnetic resistance with 16 computer-controlled levels, fully adjustable saddle (vertical and horizontal) and ergonomic handlebars with hand-pulse sensors, max. user weight 130 kg, LCD console displaying speed, distance, time, calories, pulse and pre-set workout programmes, transport wheels and levelling pads. Including freight, loading/unloading, assembly, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 6 | Supplying, installation, testing and commissioning of Commercial Rowing Machine (Magnetic / Air Resistance Type) conforming to EN-957 / ISO 20957 standards, with heavy-duty MS powder-coated frame, aluminium slide rail (length min. 1200 mm) with sealed bearings, multi-level resistance (minimum 16 levels) by magnetic or air-flywheel mechanism, anti-slip footrests with adjustable straps, ergonomic moulded seat, anti-slip rowing handle with nylon strap/chain drive, max. user weight 150 kg, LCD console displaying time, distance, strokes/min, calories and pulse. Including freight, loading/unloading, assembly, levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 7 | Supplying, installation, testing and commissioning of Commercial Lat Pull Down cum Low Row Combo Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with sectorised weight stack of minimum 90 kg in 5 kg increments encased in protective shroud, heavy-duty aircraft-grade steel cable (Ø 5 mm), nylon-coated pulleys with sealed ball-bearings, adjustable thigh pad with knee-lock mechanism, lat bar and low-row V-handle attachments, double-stitched upholstery with high-density PU foam padding. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty on structure and moving parts. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 8 | Supplying, installation, testing and commissioning of Commercial Selectorised Chest Press Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with selectorised weight stack of minimum 90 kg in 5 kg increments with protective shroud, converging press-arm mechanism with sealed ball-bearing pivots, aircraft-grade steel cable (Ø 5 mm) with nylon-coated pulleys, ergonomic dual-position handles, multi-position adjustable seat, high-density PU foam-padded back/seat rest with double-stitched upholstery. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 9 | Supplying, installation, testing and commissioning of Commercial Selectorised Shoulder Press Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with selectorised weight stack of minimum 80 kg in 5 kg increments with protective shroud, converging arc-of-motion press arms with sealed ball-bearing pivots, aircraft-grade steel cable (Ø 5 mm) with nylon-coated pulleys, dual-grip ergonomic handles, multi-position adjustable seat with high-density PU foam padding and double-stitched upholstery. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 10 | Supplying, installation, testing and commissioning of Commercial 45° Inclined Leg Press Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 100 × 50 × 4 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with sled-type platform sliding on hardened chrome guide rods with linear bearings, plate-loaded type accommodating Olympic plates up to 300 kg, anti-skid foot platform (min. 600 × 500 mm) with diamond-pattern tread, three-position safety stoppers and dual safety hooks, contoured back-rest with high-density PU foam padding and double-stitched upholstery. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 11 | Supplying, installation, testing and commissioning of Commercial Selectorised Pec Deck Fly Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with selectorised weight stack of minimum 80 kg in 5 kg increments with protective shroud, dual converging fly-arms with sealed ball-bearing pivots and PU-padded contact pads, aircraft-grade steel cable (Ø 5 mm) with nylon-coated pulleys, multi-position adjustable seat with high-density PU foam padding and double-stitched upholstery. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 12 | Supplying, installation, testing and commissioning of Commercial Leg Extension cum Leg Curl Combo Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with selectorised weight stack of minimum 80 kg in 5 kg increments with protective shroud, dual-function cam mechanism for leg extension and seated/prone leg curl, sealed ball-bearing pivots, aircraft-grade steel cable (Ø 5 mm) with nylon-coated pulleys, adjustable roller-pad arms, multi-position back-rest with high-density PU foam padding and double-stitched upholstery. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 13 | Supplying, installation, testing and commissioning of Commercial 4-Station Multi-Gym, conforming to EN-957 / ISO 20957 standards, fabricated out of 100 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), comprising four independent training stations (typically Lat Pull Down / Chest Press / Pec Deck / Leg Extension or equivalent) operable simultaneously, with four selectorised weight stacks of minimum 75 kg each in 5 kg increments under protective shrouds, aircraft-grade steel cables (Ø 5 mm) with nylon-coated sealed-bearing pulleys, complete set of attachments (lat bar, V-handle, ankle strap, straight bar), high-density PU foam-padded seats/back-rests with double-stitched upholstery. Including freight, loading/unloading, assembly, anchoring/levelling on prepared flooring, trial run, demonstration and three-year on-site warranty on structure and moving parts. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 14 | Supplying, installation, testing and commissioning of Commercial Smith Machine, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 75 × 3 mm MS square hollow section duly powder-coated (DFT = 70 microns), with Olympic-bar (Ø 50 mm) sliding on dual hardened chrome-plated guide rods through linear ball-bearings, counter-balanced for smooth vertical travel, multiple safety catch positions at 75 mm intervals along the full travel, integrated J-hooks and plate-storage pegs, anti-tip base frame with rubber feet, max. user load 300 kg. Including freight, loading/unloading, assembly, anchoring/levelling, trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 15 | Supplying and delivery at site of Olympic Barbell Set comprising one Olympic Barbell of length 2200 mm, sleeve diameter 50 mm, shaft diameter 28–29 mm, made of high-tensile alloy steel with tensile strength not less than 1,50,000 PSI, chrome-plated finish, dual knurling (powerlifting plus Olympic marks), needle-bearing rotating sleeves, load capacity not less than 300 kg, complete with a pair of spring collar clamps: along with a set of cast-iron rubber-coated Olympic weight plates (Ø 50 mm hole) of total weight not less than 150 kg in assorted denominations (e.g. 2 × 1.25 kg, 2 × 2.5 kg, 2 × 5 kg, 4 × 10 kg, 4 × 15 kg). Including transportation, loading/unloading at site and stacking on rack. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 16 | Supplying and delivery at site of Adjustable / Fixed Hexagonal Dumbbell Set ranging from 5 kg to 50 kg in pairs (graduations of 2.5 / 5 kg), of cast-iron core with rubber-encapsulated hex heads and contoured chrome-plated knurled steel grip, total set weight not less than 500 kg, along with one three-tier MS dumbbell rack fabricated out of 50 × 50 × 3 mm square hollow section duly powder-coated (DFT = 70 microns), with anti-slip rubber-lined tray on each tier and load capacity not less than 600 kg. Including transportation, loading/unloading and arrangement on rack. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 17 | Supplying and delivery at site of Commercial Adjustable Flat / Incline / Decline (FID) Bench, conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with seat-back adjustable through minimum seven angles (–20° decline to plus 85° incline), seat and back-rest cushioned with high-density PU foam and double-stitched vinyl/rexine upholstery, integral foot-roller pads for decline locking, transport wheels at front and rubber-padded base, max. user plus load capacity not less than 350 kg. Including freight, loading/unloading, assembly, levelling, trial check and demonstration. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 18 | Supplying and delivery at site of Commercial Preacher Curl Bench (Scott Bench), conforming to EN-957 / ISO 20957 standards, fabricated out of 75 × 50 × 3 mm MS rectangular hollow section duly powder-coated (DFT = 70 microns), with angled arm-rest pad (approx. 30°) padded with high-density PU foam and double-stitched rexine/vinyl upholstery, height-adjustable seat with quick-lock pin, integral barbell holder, and rubber-padded base. Including freight, loading/unloading, assembly, levelling and trial check. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 19 | Providing and laying interlocking Rubber Gym Flooring tiles of size 1000 × 1000 mm and nominal thickness 8 mm (conforming to relevant IS / EN 14904 standards), made of EPDM-granule top layer with SBR rubber base, density not less than 950 kg/cum, Shore-A hardness 60±5, in approved colour, over a duly cleaned, levelled and primed RCC/cement-concrete sub-floor, including supply of reputed synthetic adhesive (PU-based) wherever required, neatly butt-jointed with interlocking edges, including cutting to required size at edges/corners and providing matching skirting tile up to 75 mm height where directed. The work shall include filling minor undulations, edge sealing, cleaning of surplus adhesive and final cleaning after curing. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 20 | Providing and fixing in position Wall-Mounted Gym Quality Mirror of 5 mm thick selected silver-coated float glass (conforming to IS 3438), with copper backing and double-coat protective paint, having distortion-free reflection, edges polished and bevelled, fixed in true plumb to wall on 12 mm thick marine-grade plywood/MDF backing with approved mirror adhesive and SS mirror clips/J-channel at top and bottom: including all hardware, scaffolding, drilling, raw plugs, sealing of joints with neutral-cure silicone sealant and cleaning. Measurement shall be on net finished face area. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 21 | Supplying, installation, testing and commissioning of Split Air-Conditioner of 1.5 TR (18,000 BTU/hr), BEE 5-Star rated inverter type, R-32 refrigerant, of reputed make ( Like Voltas / Daikin / LG / Bluestar or equivalent etc), comprising indoor unit (high-wall split type with anti-bacterial filter and remote control) and outdoor unit with copper condenser: including supply and fixing of MS powder-coated outdoor stand, refrigerant copper piping (insulated, up to 5 m run) with drain pipe, 3-core copper wiring between IDU and ODU, MCB and dedicated 16 A power point with earthing, core-cutting and grouting wherever required, gas charging if any, leakage test, trial run for at least 2 hours, and three-year on-site comprehensive warranty (5-year compressor warranty). All complete as per specifications and as directed by the Engineer-in-Charge. |
| 22 | Supplying and installation of 12-Door MS Locker Unit fabricated out of 0.8 mm (20 SWG) CRCA M.S. sheet (conforming to IS 513), of overall size approx. 1830 × 900 × 380 mm (H × W × D) with three columns × four tiers giving twelve compartments of approx. 450 × 300 × 380 mm each, each door provided with stiffener, three-side rubber gasket, SS hinges, ventilation louvers, name-card holder and individual cam-lock with two keys: the body duly degreased, phosphated and finished with epoxy powder coating (DFT = 50 microns) in approved shade. Including freight, loading/unloading, in-position assembly, levelling, fixing to floor/wall with anchor fasteners wherever required and handing over in working condition. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 23 | Supplying, installation, testing and commissioning of Bottom-Loading Hot and Cold Water Dispenser of reputed make ( Like Voltas / Blue Star / Bluestar / Symphony or equivalent etc), with stainless-steel hot and cold water tanks, child-safety lock on hot-water tap, cooling capacity not less than 2 L/hr and heating capacity not less than 5 L/hr, suitable for 20-litre bottom-loaded bottle, with ABS outer body, indicator LEDs, suitable for 230 V / 50 Hz single-phase supply with 3-pin plug-top: including positioning, levelling, electrical connection to existing socket, first trial run, demonstration and three-year on-site warranty. All complete as per specifications and as directed by the Engineer-in-Charge. |
| 24 | Supplying and fixing of Wall-Mounted First-Aid Box of approved make conforming to Factories Act / IS 9258 requirements, with CRCA M.S. body (min. 0.8 mm thick) duly epoxy powder-coated in white/green with Red Cross marking on front, hinged door with lock and transparent acrylic window, internal partitions/trays: stocked with standard contents — adhesive plasters, sterilised dressings of various sizes, cotton wool, crepe and roller bandages, triangular bandages, antiseptic solution (Dettol/Savlon etc), povidone-iodine, burn ointment, ORS sachets, paracetamol tablets, pain-relief spray, scissors, tweezers, safety pins, disposable gloves, surgical tape and contents list pasted inside: including fixing to wall with raw plugs and screws at directed height. All complete as per specifications and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
