|
| 1 | Supply of new Transformer Oil of approved/standard make conforming to IS 335:2018 with latest amendments, possessing requisite dielectric strength, low moisture content, oxidation stability and other characteristics as specified under the relevant BIS standard. |
| 2 | Supply of Wooden Cylindrical Former for HV/LV winding, size 80 mm Length × 200 mm Girth (Circumference). |
| 3 | Supply of Wooden Cylindrical Former for HV/LV winding, size 80 mm Length × 150 mm Girth (Circumference). |
| 4 | Supply of Wooden Cylindrical Former for HV/LV winding, size 75 mm Length × 140 mm Girth (Circumference). |
| 5 | Supply of Wooden Cylindrical Former for HV/LV winding, size 100 mm Length × 150 mm Girth (Circumference). |
| 6 | Supply of Wooden Cylindrical Former for HV/LV winding, size 170 mm Length × 150 mm Girth (Circumference). |
| 7 | Supply of Wooden Cylindrical Former for HV/LV winding, size 180 mm Length × 175 mm Girth (Circumference). |
| 8 | Supplyof Wooden Cylindrical Former for HV/LV winding, size 60 mm Length × 160 mm Girth (Circumference). |
| 9 | Supply of Wooden Cylindrical Former for HV/LV winding, size 60 mm Length × 150 mm Girth (Circumference). |
| 10 | Supply of Wooden Cylindrical Former for HV/LV winding, size 100 mm Length × 125 mm Girth (Circumference). |
| 11 | Supply of Wooden Cylindrical Former for HV/LV winding, size 90 mm Length × 200 mm Girth (Circumference). |
| 12 | Supply of Wooden Cylindrical Former for HV/LV winding, size 580 mm Length × 110 mm Girth (Circumference). |
| 13 | Supply of Wooden Cylindrical Former for HV/LV winding, size 400 mm Length × 70 mm Girth (Circumference). |
| 14 | Supply of Wooden Cylindrical Former for HV/LV winding, size 400 mm Length × 80 mm Girth (Circumference). |
| 15 | Supply of Wooden Side Collar for transformer winding, size 280 mm Girth (Circumference). |
| 16 | Supply of Wooden Side Collar for transformer winding, size 310 mm Girth (Circumference). |
| 17 | Supply of Wooden Side Collar for transformer winding, size 350 mm Girth (Circumference). |
| 18 | Supply of Wooden Side Collar for transformer winding, size 240 mm Girth (Circumference). |
| 19 | Supply of Wooden Rectangular Former for HV/LV winding, size 140 mm Width × 260 mm Height. |
| 20 | Supply of Supply of Automatic LV Winding MachineAutomatic Low Voltage Winding Machine suitable for distribution transformers up to 1000 kVA. Variable speed AC/VFD drive, programmable winding pitch, digital turn counter, automatic stop at preset turns, suitable for copper/aluminium strip and wire winding, heavy-duty fabricated steel frame, foot pedal operation, spindle with tailstock, emergency stop, 415V AC, 50 Hz supply & testing. |
| 21 | Supply of Digital Insulation Resistance Tester (Digital Megger) – 5 kVMicroprocessor-controlled Digital Insulation Resistance Tester. Test Voltages: 250V, 500V, 1000V, 2500V & 5000V selectable. Insulation Resistance Range: 1 TΩ to 10 TΩ or higher. Accuracy: ±5% of reading ±2 digits or better. Short circuit current ≥3 mA. Polarization Index (PI) and Dielectric Absorption Ratio (DAR) measurement. Automatic discharge after testing. Guard terminal, backlit LCD display, rechargeable battery, CAT IV safety rating, IP54 or better, supplied with test leads, charger and carrying case. Calibration certificate to NABL/Equivalent. |
| 22 | Supply of Canvas Pipe – 1.5 Inch DiaFlexible heavy-duty canvas hose pipe, internal diameter 1.5 inch (38 mm), oil resistant, abrasion resistant, suitable for transformer oil transfer, reinforced construction, working pressure minimum 8 bar, complete with end fittings if required. |
| 23 | Supply of Rechargeable Impact Wrench (Full Set)Cordless brushless impact wrench, minimum 18V Li-ion battery, torque not less than 1000 Nm (breakaway torque higher preferred), variable speed trigger, forward/reverse operation, ½” or ¾” square drive, LED work light, supplied with two batteries, fast charger, carrying case and socket set. Reputed make only. |
| 24 | Supply of C-ClampsHeavy-duty forged steel C-Clamps, screw spindle with swivel pad, powder-coated finish, opening capacity minimum 150 mm (6”) or as specified, suitable for transformer fabrication and workshop applications. |
| 25 | Supply of Lifting Belts with Hooks – 2 Metre LongDuplex polyester web lifting sling with forged alloy steel hooks at both ends, length 2 metres, Safe Working Load (SWL) minimum 2 Ton (or as specified), safety factor 7:1, IS/EN certified, colour coded, abrasion-resistant, complete with test certificate. |
| 26 | Supply of Open Ended Spanner – 14 × 15 mmChrome Vanadium Steel construction, drop forged, hardened and tempered, mirror/polished finish, conforming to IS 2028/DIN 3110 or equivalent. Size: 14 × 15 mm. |
| 27 | Supply of Open Ended Spanner – 18 × 19 mmChrome Vanadium Steel, drop forged, heat treated, corrosion resistant finish, IS/DIN standard, Size: 18 × 19 mm. |
| 28 | Supply of Open Ended Spanner – 20 × 22 mmChrome Vanadium Steel, hardened and tempered, polished finish, IS/DIN standard, Size: 20 × 22 mm. |
| 29 | Supply of Open Ended Spanner – 24 × 27 mmChrome Vanadium Steel, forged construction, high strength, corrosion resistant finish, IS/DIN standard, Size: 24 × 27 mm. |
| 30 | Supply of Digital Flow MeterPortable Digital Flow Meter suitable for transformer oil measurement. Flow range: 10–100 LPM (or suitable as required). Accuracy ±1% or better. Digital LCD display. Totalizer function. Rechargeable battery or 230V AC operation. Compatible with transformer oil. Stainless steel/aluminium body. IP54 or higher protection. Complete with hose connections, calibration certificate and carrying case. |
| 31 | Supply of Corded Electric Angle Grinder of reputed make, suitable for heavy-duty metal and construction applications, having rated power input 2200 Watts, 230 mm disc diameter, M14 spindle thread, operating on 220-240V, 50Hz AC supply, with no-load speed of approximately 6500 RPM, complete with wheel guard, side handle, flange set, lock nut, spanner/wrench, power cable and all standard accessories, conforming to relevant IS/IEC standard. |
| 32 | Supply of Petrol Operated Chainsaw, conforming to IS 17017:2018 / ISO 11681-1 or latest amendments, Model 162 or equivalent, suitable for cutting firewood, tree branches, pruning and general forestry operations, complete with 16-inch (400 mm) guide bar, lightweight compact design, two-stroke air-cooled gasoline engine of minimum 61.5 cc displacement, rated output not less than 2.5 kW (3.4 HP), automatic chain lubrication system, recoil starter, chain brake, anti-vibration handle system, fuel tank capacity not less than 500 ml, chain oil tank capacity not less than 250 ml, complete with saw chain, guide bar cover, tool kit and all standard accessories. The chainsaw shall be supplied in ready-to-use condition and conform to relevant safety and quality standards. |
| 33 | Providing and fixing of window jambs/frame of approved quality including holdfasts, fixtures and all allied works complete. |
| 34 | Providing and fixing of 5 mm thick clear float glass in windows including putty/beading, cutting, fitting and finishing complete. Please Enable Macros to View BoQ information |
