|
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 2 | Material and labour for brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed. |
| 3 | All as per serial item No 2 herein before but except bricks (using old serviceable bricks obtained from ser item No 1 here-in-above) complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick/stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete. |
| 6 | M&L for 15mm thick rendering cement plaster in Cement mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements complete all as specified and directe |
| 7 | M&L for rendering 15mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface fair and even without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. |
| 8 | M&L for 10mm thick rendering in ceiling CM 1:3 over brick work or concrete surfaces finished even and smooth without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of primer on the surfaces including 1mm thick wall care putty complete all as specified and directed |
| 10 | M&L for applying Two or more coats on new plasteredsurfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height (n.Exc 11m )incl necessary scaffolding /Centreing etc complete all as specified and directed. |
| 12 | M&L for two coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed |
| 13 | Preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 14 | Preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 15 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enameled paint complete all as specified & directed. |
| 17 | M&L for Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and applying one coats of cement base paint with fully automatic airless spray machine of paint application with a flow speed of min 1 lts per minute having a pressure including at any height (not.exc 11mtr )incl necessary scaffolding /Centreing etc complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 19 | M&L Glazed ceramic coloured tiles in vertical surfaces of size 350 x 250x 7mm /450mm x 350mm x7mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:4 for receiving the tiles complete all as specified complete all as specified. |
| 20 | M&L Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick cement mortar (1:6) screed bed for floor finishes complete all as specified complete all as specified. |
| 21 | M&L for Vitrified Coloured Ceramic tiles 10mm thick square polished area of each tile not exe 0.36 sqm in floor, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including10 mm thick bedding layer in CM 1:6 complete all as specified complete all as specified. |
| 22 | Ditto all as per item no above item but as in skirting/ daddo including and over 10mm rendering in cement mortar 1:4 complete all as specified and as directed. |
| 23 | Dismantling of boarding any description fixed in any position fixed with screws complete all as specified and directed |
| 24 | M&L Powder coated Gl frame work grid 605x 605mm for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 3mm dia GI (up to 1200mm length )adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia ,40mm long complete all as specified and directed. |
| 25 | M&L 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timper /GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 26 | S&F factory made 18mm thick solid WPC (wood polymer composite) board of density 650kg/cum of one side prelaminated/rigidlam with any colourn and other side balancing lamination, as in cupboards/kitchen/ cabinet shutter/ drawers etc fixed with screws, sovent cement, adhesive complete all as specified and directed. |
| 27 | M&L for solid WPC (wood polymer composite) board 25mm thick interior grade, pre laminated one side ,fixed with screws as in shutters of cup boards and kitchen cabinets, including dismantling old existing boardcomplete all as specified & directed . |
| 28 | S&F 18 mm thick HDHMR Board for Cup board and shutters prelaminated both sides white, as per approved design manufactured from hardwood and having uniform density gradient & compact core with density over 850 kg/m3, complete all as specified and directed. |
| 29 | S&F 1.5mm thick scratch proof high gloss Acrylic sheet, to be pasted on front shutters of HDHMR board, complete all as specified and directed. |
| 30 | S&F in repair magnetic cathcher for kitchen cabinet/ cupboard complete all as specified and as directed. |
| 31 | S&F for continuos piano hinges, mild steel bright finish width of flap 30mm, fixed as in repair complete all as specified and as directed. |
| 32 | Taking down chowkhat n.exc 1.5 sqm each with or without taking off shutter and removing from site complete all as specified and as directed. |
| 33 | Taking down chowkhat exc 1.5 sqm each but not exc 4.00 sqm with or without taking off shutter and removing from site complete all as specified and as directed. |
| 34 | Taking down shutter exc 1sqm but n.exc 2 sqm each & removing from site complete all as specified and directed. |
| 35 | Resecuring or easing & adjusting Same opening Shutters of any description exc 1.0 sqm and n exc 2.0 sqm complete all as specified and directed. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm and 45 x 85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed. |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 38 | S&F 125mmx60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6 type C1 in frame complete all as specified and as directed. |
| 39 | S&F 105 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of cement concrete 1:3:6 type C1 in frame complete all as specified and as directed. |
| 40 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 41 | S&F 35mm 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 42 | S&F 200mm aluminium anodized barrel tower bolt (ISI Marked) of extruded section complete all as specified and directed |
| 43 | S&F 100mm aluminium anodized barrel tower bolt (ISI Marked) of extruded section complete all as specified and directed |
| 44 | S&F aluminum alloy, anodized, sliding door bolt (ISI Marked) 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy. |
| 45 | S&F 100 mm size but hinges ,extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and as directed. |
| 46 | M&L for 100mm size aluminum handle (ISI Marked) extruded type anodized, complete all as specified and directed. |
| 47 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions.Note:- (I) Thickness of powder coatings shall be not less than 30 micron.(ii) Weight of the aluminiumnsections only shall be measured and paid.(iii) Aluminium doors window/ ventilators to be fixed to jambs with cadmium plate screws.(iv) The rate shall be inclusive of neoprene beadings, handles, hinges, screws etc. weight of fittings/fixtures will not be measured for ariving the weight of aluminium section.(v) Glass panes and panels shall be measured & paid separately under respective items. Design shall be approved from GE as existing at sitebefore fabrication and bulk order to the manufacturer. |
| 48 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of GE. |
| 49 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed. |
| 50 | S&F 4.80mm thick ordinary quality tinted glass, fixed to frame work not exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 51 | S&F factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer fixed including taking down old window and finished smooth and fair surface complete all as specified and as directed. |
| 52 | S&F factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer fixed including taking down old window and finished smooth and fair surface complete all as specified and as directed. |
| 53 | S&F steel ventilator factory made fixed type including hinges, steel peg stay, a shop coat of red oxide primer including taking down old window and finished smooth and fair surface including taking down old ventilator and finished smooth and fair surface complete all as specified and as directed. |
| 54 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.. |
| 55 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed. |
| 56 | S&F 4mm thick tinted / frosted sheet glass area n exc 0.5 Sqm fixed to frame work complete all as specified & directed. |
| 57 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed. |
| 58 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed. |
| 59 | Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 60 | M&L preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed. |
| 61 | S&F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 62 | S&F in repair Pillar tap 15mm dia cast copper alloy fancy type with capstain heads, chromium plated, screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, fancy type complete all as specified and directed. |
| 63 | S&F PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/pedastal pattern etc , fixed as in repair complete all as specified and as directed. |
| 64 | Taking up or down steel tubing and connections 20/25mm bore, including cleaning for refixing or removal to store complete all as specified and directed |
| 65 | S&F in repair of 20mm bore, CPVC pipes of pressure rating 10 Kgf/Sqcm including all fittings (Like brass elbow,brass tee, male brass threaded adaptor,female brass threaded adaptor,tank adaptor,union,CPVC Flange Etc ),adhesive for joints and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 66 | S&F in repair of 25 mm bore, CPVC pipes of pressure rating 10 Kgf/Sqcm including all fittings (Like brass elbow, brass tee, male brass threaded adaptor, female brass threaded adaptor, tank adaptor, union, CPVC Flange Etc ),adhesive for joints and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 67 | S&F in repairs Brass Elbow 20mm for CPVC pipe lines complete all as specified and directed. |
| 68 | S&F in repairs Brass Elbow 25mm for CPVC pipe lines complete all as specified and directed. |
| 69 | S&F in repairs Brass Tee 20mm for CPVC pipe lines complete all as specified and directed. |
| 70 | S&F in repairs Brass Tee 25mm for CPVC pipe lines complete all as specified and directed. |
| 71 | S&F 15mm bore GI tubing “medium grade”, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors Taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 72 | S&F 20mm bore GI Tubing “medium grade”, galvanized, with and including all fittings and fixed complete to walls and ceilings or laid in floors Taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 73 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed |
| 74 | S&F vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repair complete all as specified and as directed. |
| 75 | S&F vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repair complete all as specified and as directed. |
| 76 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket to connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 77 | S&F in repair plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, complete all as specified and directed. |
| 78 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. fixed as complete all as specified and directed. |
| 79 | S&F in repair cromium plated Jet for EWC for 15mm bore with fittings complete all as specified and as directed. |
| 80 | S&F wall Mixer, mixer for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed |
| 81 | S&F in repair vitreous china wash hand basin, white, flat back, size 550x400mm including brackets of suitable size, complete all as specified and directed. |
| 82 | S&F in repair bath cabinet of size 600mm x 450mm fixed to wall with rawl plugs having arrangements to put inside toiletries, complete all as specified and directed. |
| 83 | S&F 25mm dia,curtain rod mild steel chromium with fixing brackets, stops, end rollers etc. for including taking down defective bracket all as specified and as directed. |
| 84 | S&F in repair towel rail 600mm long of chromium plated fixed with and including chromium plated screws and wooden / plastic cleats (minimum weight 190gms), complete all as specified and directed. |
| 85 | S&F in repair of brass chromium plated shower rose, 125mm size with long swivel plush CP arm complete all as specified . |
| 86 | S&F in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified . |
| 87 | S&F in repair 15mm bore angle valves, cast copper alloy, fancy type chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and all as specified and directed. |
| 88 | S&F 15mm bore Bib taps, cast copper ally, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair all as specified and directed. |
| 89 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaningcomplete all as specified and directed. |
| 90 | S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed |
| 91 | S&F in repairs 600 x 450 mm bevelled edge mirror of selected quality glass 5 mm thick mounted on 6 mm thick commercial ply wood plastic moulded/aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 92 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaningcomplete all as specified and directed.complete all as specified and directed. |
| 93 | S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed |
| 94 | Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed |
| 95 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 96 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 97 | M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 98 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick cement screed in CM 1:4 and jointed with ditto complete all as specified and directed. |
| 99 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks white in colour (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed |
| 100 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks white in colour (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed |
| 101 | Cleaning and removing all scale and dirt, etc. from tanks any height and form mouths of circulating pipes, etc complete all as specified and as directed. |
| 102 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 103 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, includingNainital or similar pattern roof coverings complete all as specified and as directed. |
| 104 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed. |
| 105 | S&F Fibre glass reinforced translucent corrugated/Plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 106 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 108 | S&F rolled sections as in main and cross beams, coloumns , hip and jack rafters; purlins where connected to common rafters of angle , pipe sections etc Fe 410 Gde 250 quality B complete all as specified and as directed |
| 109 | M&L for framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-290 fixed as in repair complete all as specified and directed. |
| 110 | M&L painting to new steel and iron surface exc 10 cm width or girth and applying two coats of synthetic enamal paint over 1 coat of primer including preparation of surfaces complete all as specified and directed. |
| 111 | Demolition of cement concrete (unreinforced) of any description and in any position (below or above GL at any ht) not otherwise specifically provide for complete all as specified and directed. |
| 112 | M&L for cement concrete 1:2:4 Type B 1 (using 20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water trought and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 113 | M&L for 75mm thick Cement concrete type C2, (1:3:6) (using 40mm graded aggregate) as in Plinth protection finished the concrete surface even and smooth W/O using extra cement complete all as specified and directed. |
| 114 | S&F factory made rubber moulded machine pressed coloured chequered cement concrete tiles 250mm x 250mm x 22-25mm thick (with grey cement and no pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6, over Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) for 75mm thick floor as in sub base for tiles complete all as specified and directed. |
| 115 | S&F concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 40mm thick sand cushioning, over Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) for 75mm thick floor as in sub base for tilescomplete all as specified and directed. |
| 116 | M&L taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement, wire brushing and claening the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reinforcement/chicken wire mesh for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 11.0mtr (Appx) complete all as specified and as directed. |
| 117 | M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm garded stone agg as in flooring, finished concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 118 | Dismantling of brick tiles laid or bedded in cement mortar complete all as specified and as directed. |
| 119 | M&L for Rendering 15 mm thick, finished even and fair on roof slab in cement mortar 1:4, using water proofing compound @ 3% by weight of cement complete all as specified. Note :- (WPC will be measured and paid seperately) |
| 120 | Supply only integral water proofing compound |
| 121 | Taking down of old roof treatment of any description including Brickbat, coba finishes,cement mortor screeds,chinamosic tiles,brick/pcc tiles, ceramic tiles from roof surfaces etc including cleaning ,brushing and watering to joints and grooves and throwing the demolition materials/waste, debris away from the MOD Land etc complete and the roof of height n.ecx 11 mtr etc complete all as specified and directed. |
| 122 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof , paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed. |
| 123 | M&L Cutting out cracks to V-section in existing roof surfaces, chases pinning in making good to facings where required and repair with fiber reinforced mortor equivalent to ( MAPEGROUT T40 ) mixed with SBR in ratio 1:1 for repair of cracks and that filled with sigle component polyurethane sealent eqivalent to (NITOSEAL :PU50) at the roof for the water proofing as per manufacturer instructions complete all as specified and directed. |
| 124 | M&L for cleaning the surface of the stone/concrete roof and slab with wire brush/ mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface and removing complete and applying one coat of sealer @ 0.2 kg/sqm of SBR equivalent to (Dr Fixit 302 Super latix) and cement in ratio of 1:1 having a capacity of filling cracks of less than 3mm and having bonding agent propertycomplete all as specified and directed. |
| 125 | M&L applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5kg/Sqm/2coats spray/brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM C2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied which is the combination of base and hardener water based epoxy system as per manufacturer's instructions complete all as specified and directed. |
| 126 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 127 | M&L for cement concrete 1:5:10 type E2 (40 mm graded stone aggregate) as in foundation filling and mass concrete or sunken etc complete all as specified and as directed. |
| 128 | M&L for 15mm thick plastering in CM 1:4 with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound all as specified and directed. |
| 129 | M&L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate ) 40 mm thick in sunken of bath /toilet /Kitchen etc WPC 3% by weight of cement complete all as specified and directed. Note:- WPC shall be measured and paid seperaitly. |
| 130 | Supply and applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating,smart damp block 2k suprema or approved equivalent,having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing etc complete as per manufactures specifications and as directed. |
| 131 | M&L for Providing & applying in any surface Alkaline Rust converting primer APCOREP RUSTREM in two coats conforming to ASTM-B-117 & ASTM-G-60-86 to exposed existing rebars after removing & cleaning loose rust by wire brush and leave it for 6-8 hours. The rust converter shall have a minimum pH of 7.5 and shall be able to convert both hematite and magnetite forms of rust shall pass 400 alternate immersion cycles in 3.5 % NaCl complete all as specifdied and directed. |
| 132 | M&L for Providing and applying in any surface anti-corrosive coating APCOREP RUSTCOAT RB (CSIR/CBRI know how) in 2 coats with time interval of minimum 6 hours. The coating shall have ECorr value of -45 mV against SCE in 3.5 NaCL for 100 hours and electrochemical evaluation of max 0.5 mA /cm2. This coating shall be applied over APCOREP RUSTREM coated rebars complete all as specifdied and directed |
| 133 | M&L for Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect as following:- (a) SBR polymer (@ 10 % of cement weight ) modified cementation coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer complete all as specified and directed. |
| 134 | M&L for Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, repair mortar SMARTCAE REPAIR MORTAR capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed. |
| 135 | S&F in repairs Nozel pipe for WHB 15 mm size of length 600 mm complete all as specified and directed . |
| 136 | S&F in repair 20 mm dia ball valves PTMT , high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed . |
| 137 | S&F of Mild steel cover sheet water tank cover made out of 1 mm thick GI steel sheetwith sharp spikes for prevention of its lid with monkey of design and pattern as approved by GE and suitable for 500 and 1000 Ltr tank as the case may be fixed with machine screw etc Complete all as specified and directed. |
| 138 | M&L for injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 139 | M&L for injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 140 | M&L for grinding and polishing of existing mosaic tile/ Kota stone or terrazo flooring up to required finishing complete all as specified and directed. |
| 141 | S&F in repairs Internal kit including flush handle & float for low level flushing cistern complete all as specified and directed. |
| 142 | M&L for cleaning of spot blockage of floor trap, nahani trap, gully trap, WC (Indian or EWC),WHB, Sink outlet by removing the CP or PVC grating and CI oval access door etc of any type including cleaning of sludge & removing to out side of MD Accn complete or cleaning and removing of spot blockage by any means in between trap and up to Ist manhole of any size and depth & removing of sluge to a distance 50 M and including cutting/clearing away grass vegetation, saplings, shrubs ,brushwood ,undergrowth ,roots compelet all around of manholes complete all as specified and directed. |
| 143 | S& F in repair stainless steel kitchen plate rack wall mounted of overall minimum size1100 x 800 mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel gauge,fixed with rawl plug and CP steel screws complete all as specified and directed. |
| 144 | S&F for Waste cupling for sink of 125mm dia complete all as specified |
| 145 | S&F in repairs PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink Please Enable Macros to View BoQ information |
