Tender For Construction Of 2 Nos Of Twin . D Type N.H. Staff Quarter Under Nh Division Deogarh For 2025-26., Deogarh-Odisha

TDR : 56086922

Tender Notice
BOQ

4 Days Left

Deogarh , Odisha

Tender Brief : Tender For Construction Of 2 Nos Of Twin . D Type N.H. Staff Quarter Under Nh Division Deogarh For 2025-26.

Document Fees
₹ 10000 /-

EMD
₹ 169000.0 /-

Tender Value
₹ 1.68 Crore /-

Submission Date
04-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Ground floor :Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the works site within 50m initial lead &1.5m initial lift. complete as directed by the E.I.C.
2	Supplying ,filling and backfilling of foundation with coarse sand well watered and rammed including cost,cost of all labour ,carriage,royalty complete in all respect.
3	Cement concrete (1:3:6) using 40mm size hard granite C.B. metal approved quary including cost,carriage,royalty, cost of all labour.etc complete and as directed by E.I.C.
4	Plain cement concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost,carriage,royalty,cost of all labour.etc complete and as directed by E.I.C.
5	R.C.C. M-20 grade with 20mm and down grade C.B.chips of approved quality from approved quarry including hoisting,laying. hire charges of concrete mixture ,vibrator,watering, curing and cost of all materials and labour, etc complete but excluding cost of reinforcement.
6	Straightening , cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. Rods or tor confirming to I.S 432(Plain) and 1785(Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C Works including cost,conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect.
7	Rigid and smooth centering & shuttering for R.C.C works including false works and dismantling them after casting including cost of all materials and labour etc complete.Column base footing + Mat-1+ Plinth beam
8	Floor beam + Landing beam + Column
9	Lintel beam + Landing beam
10	Chajja + Roof slab + Landing slab
11	Stair Case
12	Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance +- 2 percent in cement motar (1:6) in foundation and plinth including watering , curing,cost of carriage , royalty and taxes of all materials, cost of all labour,etc complete as per the direction of E.I.C.
13	Brick work with Flyash Bricks 25cm x 12cm x8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance +- 2 percent in cement motar (1:6) in super Structure including watering, curing,cost of carriage, royalty and taxes of all materials,cost of all labour,etc complete as per the direction of E.I.C.
14	12mm thick C.P.(1:6) on brick massonary to the smooth surface including watering,curing,cost of all materials,carriage,royalty off all materials, cost of all labour,etc complete as per the direction of E.I.C.
15	6mm thick cement plaster (1:4) to RCC surface finished incluiuding closed deep chiping and slury treatment including curing,cost of all materials,carriage,royalty off all materials, cost of all labour,etc complete as per the direction of E.I.C.
16	Supplying, fitting & fixing of Vitrified Industrial Floor Tile of premium grade having thickness 8mm to 10mm conforming to IS 4457 of Size 300 mm x300 mm laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and fiiling joints with white cement of approved quality including cost of all materials,carriage,labour, T&P etc.required for the work all complete as per direction of the E.I.C.
17	Providing and fixing 20mm thick Granite stone flooring (Sample of Granite stone should be approved by EIC) for stair case trade,riser and similar locations where ever required on horizonrtal surface of required size of approved shade ,colour and texture,with moduling edge & Grooving etc.;laid over 25mm thick bed of cement mortar 1:1(1 cement :1 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups including rubbing, curing,moduling and polishing to give high gloss finish , cost of all materials,carriage,labour T&Petc.complete as per direction of Engineer-In-Charge.
18	Fixing Granite tiles in dados skirting and riser of steps on 12mm thick . CP (1:3) jointed with neat cement slurry mixed with pigments to mach the shade of the tiles including cost, carriage, cost of all labour etc.complete.
19	Finishing surface of wall with Cement based wall puty (water based) of approved make and finished smooth and even surface to receive painting including of scaffolding ,staging charges with cost of all materials,taxes ,labour, T&P etc complete.
20	Priming 1 coat with water bound wall cement primer including cost of all labour,materials , T & P etc.complete.
21	Wall painting two coat with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, labour, T & P etc complete.
22	Supplying and fixing of M.S. Doors, M.S. Grills, M.S. Gate etc including cost,conveyance of all materials and labour for fitting fixing etc. complete as per the instruction of Engineer-in-Charge.
23	Priming one coat with any approved primer to receive paint including cost of primmer, labour , T & P to give an even shade.
24	Painting two coats with approved enamel paints of approved colour,shade including sand papering, polishing the surface,cost ,conveyances of all materials and cost of all labour etc complete as per specification & direction of E.I.C .
25	Supplying, fitting and fixing of two track UPVC sliding windows of approved make with 6mm thick glass of approved quality complete with frame,shutters and all fitting and fixtures.(SoR 2022 Misc Item -25.17 & (12)
26	Supplying,fitting and fixing of 5.5 mm thick hexagonal Aluminum jally in windows as single groove,double groove and tapered clip as horizental and vertical memebers for fixing of aluminium jally and jointing angle conforming to standard Aluminium sections etc. complete (SOR 2022 NEW MISC ITEM VIDE Page no-234 & item no-10).
27	Providing and fixing in position 50mm thick precast cement concrete jally (1:2:4) using hard granite chips including roughening ,cleaning,fixing and finishing in cement mortar (1:3) etc.complete (SOR 2022 Misc.Item 25.1)
28	Supplying,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification ,buffing,polishing etc.with the cost,conveyance taxses of all material,cost of all labour etc. complete in all respect.
29	First Floor:R.C.C. M-20 grade with 20mm and down grade C.B.chips of approved quality from approved quarry including hoisting,laying. hire charges of concrete mixture ,vibrator,watering, curing and cost of all materials and labour, etc complete but excluding cost of reinforcement.
30	Straightening , cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. Rods or tor confirming to I.S 432(Plain) and 1785(Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C Works including cost,conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect.
31	Rigid and smooth centering & shuttering for R.C.C works including false works and dismantling them after casting including cost of all materials and labour etc complete.Floor beam + Landing beam + Column
32	Lintel Beam(250mm Beam,125 mm Beam) + Landing Beam
33	Chajja (W1,W2,W3,W4, J1,V1) + Kitchen slab + landing slab + Roof slab
34	Shelves(kitchen ,Master bed room, Dinning , Drawing , Childrens Bed Room )
35	Fin (Balcony-1,Balcony-2)
36	Stair Case
37	Brick work with flyash Bricks 25cmx12cmx8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance +-2 percent in cement mortar (1:6) in Super Structure including watering , curing,cost of carriage,royalty and taxes of all materials ,cost of all labour,etc complete as per the direction of E.I.C.
38	Brick Work with Fly Ash Bricks 25cmx12cmx8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance +-2 percent in cement mortar(1:4) in Super Structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary including curing,cost of carriage ,royalty and taxes of all materials ,cost of all labour,etc complete as per the direction of E.I.C .
39	12mm thick C.P.(1:6) on brick massonary to the smooth surface including watering,curing,cost of all materials,carriage,royalty off all materials, cost of all labour,etc complete as per the direction of E.I.C .
40	16mm thick C.P.(1:6) over brick masonary to the uneven surface including watering ,curing, cost of all materials,carriage,royalty,and taxes of all materials, cost of all labour etc complete as per the direction of E.I.C
41	6mm thick cement plaster (1:4) to RCC surface finished incluiuding closed deep chiping and slury treatment including curing,cost of all materials,carriage,royalty off all materials, cost of all labour,etc complete as per the direction of E.I.C.
42	Supplying, fitting & fixing of Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 13755 of sizes. 60cm x 60cm coloured/printed series laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, carriage, cost of all labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
43	Fixing Vitrified Tiles 60cm x 60cm coloured/printed series in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, carriage, cost of all labour, T & P etc. complete.
44	Providing and fixing 20mm thick Granite stone flooring (Sample of Granite stone should be approved by EIC) for stair case trade,riser and similar locations where ever required on horizonrtal surface of required size of approved shade ,colour and texture,with moduling edge & Grooving etc.;laid over 25mm thick bed of cement mortar 1:1(1 cement :1 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups including rubbing, curing,moduling and polishing to give high gloss finish , cost of all materials,carriage,labour T&Petc.complete as per direction of Engineer-In-Charge.
45	Fixing Granite tiles in dados skirting and riser of steps on 12mm thick . CP (1:3) jointed with neat cement slurry mixed with pigments to mach the shade of the tiles including cost, carriage, cost of all labour etc.complete.
46	Supplying, fitting & fixing of Vitrified floor tiles on shelf of premium grade having thickness 8mm to 10mm confirming to IS 13755 of sizes. 60cm x 60cm coloured/printed series laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, carriage, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.
47	Finishing surface of Walls with Cement based wall putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, taxes, labour ,T &P etc complete.Inside Surface
48	Outside Surface
49	Priming 1 coat with water bound wall cement primer including cost of all labour,materials , T & P etc.complete. Inside Surface
50	Outside Surface
51	Wall painting two coat with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, labour, T & P etc complete.
52	Wall painting two coat with any approved weather coat paint including cost of all materials,labour and T&P require for the work etc. complete as directed by the E.I.C .
53	Supplying ,Fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame,shutters and all fitting and fixtures .SOR 2022 Misc Item 25.17(12).
54	Supplying ,fitting and fixing of 5.5mm thick hexagonal Aluminium jally in windows as single groove, double groove and trapered clip as horizental and vertical memebers for fixing of aluminium jally and jointing anggle conforming to standard aluminium sections etc.complete (SoR 2022 New Misc Item Vide Page No-234 & Item No-10)
55	Providing and fixing of fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6MM THICK \\"D\\" Quality, galvanized as per IS-277 with zinc of 120Gm/Sq.mtr) with paint ......with cost,conveyance and taxes of all materials,coat of all labour ,T&P etc complete as per the direction of the Engineer -in-Charge.
56	Supplying Dressed seasoned Sal wood work framed and fixed (wrought and put up) in frames of doors of size (100mm75mm,100mm50mm,100mm*40mm) including cost of all material,labour ,carriage ,T & P etc complete.
57	Supplying and fixing W.I.clamps 25cm to 30cm long of 35mmx5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm to 20mm hard stone chips por in cement mortar (1:3) including cost of all materials (SoR 2022 Vide Page no-221,SI no-14(b)).
58	Supplying ,fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc.complete (SOR 2022 New Misc Item -25.17(9)).
59	Painting two coats with approved enamel paint on wood work over a coat of wood primer of Door frame size 100mm75mm,100mm50mm,100mm*40mm including cost of all materials , labour ,T & P etc complete.
60	Supplying and fixing of M.S. Grills,M.S. Doors,M.S. Gate etc includimng cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instrucction of Engineer-in-charge.
61	Priming one coat with any approved primmer (To Receive Enamel Paint) including cost of Primmer , labour , T & P to give an evn shade etc complete.
62	Painting two coats with approved enamel paints of approved colour,shade over a coat of primer including snd papering,polishing the surface,cost,conveyance of all materilas , cost all labour, T & P etc. completet as per spcification & direction of E.I.C.
63	Providing and fixing in position 50mm thick precast cement concrete jally (1:2:4) using hard granite chips including roughening, cleaning,fixing and finishing in cement mortar(1:3) etc complete .(SoR 2022 Misc.Item 25.1)
64	Supplying ,fitting and fixing of stainless of steel 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification ,buffering,polishing etc.with the cost,conveyance taxses of all material,cost of all labour etc.complete in all respect.
65	Head Room :Providing 25mm thick grading concrete(1:2:2) on roof slab with 6.7mm &down grades size hard granite crusher broken chips using 2% water proofing cement compound (Make-sika/fosroc /Equivalent ) on new work on terrace floor including curing ,all cost of material and labour etc complete.
66	R.C.C M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting,laying hire charges of concrrete mixture,vibrator, watering,curing and cost of all materials and labour etc complete but excluding cost of reinforcement.
67	Staightening , cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. Rods or tor confirming to I.S 432(Plain) and 1785(Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. Works including cost,conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect.
68	Rigid and smooth centering & shuttering for R.C.C works including false works and dismantling them after casting including cost of all materials and labour etc complete.Stair case (Head room column , Parapet wall column,Beam) .
69	ROOF SLAB
70	Brick work with flyash bricks 25cmx12cmx8cm size having crushing strength not less than 75kg/cm2 with dimensional tolerance +-2 percent in cement mortar (1:6) in super structure including watering , curing,cost of carriage, royalty and taxes of all materials, cost of all labour,etc complete as per the direction of E.I.C.
71	12mm Thick C.P.(1:6) over brick masonary to the smooth surface including curing, cost of materials,carriage,royalty and taxes of all materials,cost of all labour etc complte as per the direction of E.I.C .
72	16mm thick C.P.(1:6) over brick masonary to the uneven surface including , curing , cost of materials, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the directionof E.I.C.
73	6mm thick cement plaster (1:4) to RCC surface finished smooth including closed deep chiping and slury treatment, curing ,cost of materials,carriage, royalty of all materials, cost of all labour,etc complete as per the direction of E-I-C.
74	Finishing surface of Walls with Cement based wall putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, taxes, labour ,T &P etc complete.Inside Surface
75	Outside Surface
76	Priming 1 coat with water bound wall cement primer including cost of all labour,materials , T & P etc.complete. Inside Surface
77	Outside Surface
78	Wall painting two coat with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, labour, T & P etc complete.
79	Wall painting two coat with any approved weather coat paint including cost of all materials,labour and T&P require for the work etc. complete as directed by the E.I.C .
80	Supplying and fixing of M.S. Grills, M.S. Doors, M.S. Gate etc including cost, conveyance of all materials and labour for fitting fixing etc. complete asper the instruction of Engineer-In-Chief.
81	Priming one coat with any approved primmer (To Receive Enamel Paint) including cost of Primmer , labour , T & P to give an evn shade etc complete.
82	Painting two coats with approved enamel paints of approved colour,shade over a coat of primer including snd papering,polishing the surface,cost,conveyance of all materilas , cost all labour, T & P etc. completet as per spcification & direction of E.I.C.
83	Approach Road:Earth work in exavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the exavated materials away from the work site within 50m initial lead & 1.5m initial lift. Complete as directed by the E.I.C.
84	Supplying ,filling & backfilling of foundation with coarse sand well watered and rammed incliding cost,cost of all labour ,carriage,royalty complete in all respect.
85	Construction of Granular Sub-base by providing closed graded Granular sub-base Grading-III material as per table 400-1, spreading in uniform layer by mortar grader on prepared surface mixing by mix in place method with rotavator at OMC and compating with vibratory roller to achive the desired density, complete as per Clause-401 of MoSRT&H Specification for road & bridge works including cost of all materials ,machinary, labour,carriage,royalty etc complete.
86	Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 GRADE OF APPROVED MAKE, DESIGN, COLOUR AND SIZE MADE BY Block making machine with proper compaction fixed in required pattarn etc. complete in all respect conforming to IS 5758:1984. (Sor 2022 New Misc item vide Page No.-233 & Item No. -3)
87	Supplying and fixing of 80mm cement concrete interlocking paver block of M-40 grade of approved make. Design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63.2018.(SoR 2022 New Misc item Vide Page No. -233 & item No.-2)
88	Drain Earth work in exavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the exavated materials away from the work site within 50m initial lead & 1.5m initial lift. Complete as directed by the E.I.C.
89	Supplying ,filling & backfilling of foundation with coarse sand well watered and rammed incliding cost,cost of all labour ,carriage,royalty complete in all respect.
90	Providing and lying plain cement concrete of proportion (1:4:8) in foundation with 40 mm. Size h.g.c.b stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry including hoisting, lowering, laying concrete, ramming and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, royalty and taxes of all materials and cost all labours, T & P required for the work etc. complete as per the instruction of the Engineer-in-Charge.
91	R.C.C M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting,laying hire charges of concrrete mixture,vibrator,curing and cost of all materials and labour etc complete .
92	Supplying all materials , labour, T&P and providing M.S reinforcement for R.C.C. work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, taxes etc all complete as per specification and direction of the Engineer-In Charge.
93	Rigid and smooth centering & shuttering for R.C.C works including false works and dismantling them after casting including cost of all materials and labour etc complete.
94	Compound Wall,Gate & Site:Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift etc. complete as directed by the E.I.C .
95	Supplying , filling & BackFilling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect.
96	Providing and lying plain cement concrete of proportion (1:4:8) in foundation with 40 mm. Size h.g.c.b stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry including hoisting, lowering, laying concrete, ramming and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, royalty and taxes of all materials and cost all labours, T & P required for the work etc. complete as per the instruction of the Engineer-in-Charge.
97	R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying, hire charges of concrete mixture, vibrator, curing and cost of all materials and labour etc complete.
98	Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect.
99	Rigid and smooth centering & shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials,Labour etc complete .Column Base Footing+Tie Beam
100	Column Upto GL+Column above GL
101	Coping over Compound wall
102	Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C
103	12mm thick C.P.(1:6) on brick masonary to the smooth surface including curing, cost of all materials, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C.
104	Plain Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
105	Priming 1 coat with water bound wall cement primer including all labour, materials, T & P etc. complete as directed by the E.I.C
106	Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C
107	Supplying, Fixing G.I. Grill gate complete including all cost of material,labour, carriage, T&P etc as per the direction of Engineer in charge.
108	Priming one coat with red oxide primmer to receive enamel paint including cost of primmer, labour, T & P to give an even shade.
109	Painting two coats with approved enamel paints of approved colour, shade including sand papering, polishing the surface, cost of materials, cost of all labour , T & P etc complete as per specification & direction of E.I.C
110	Site Clearance : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used up to a lead of 1000 metres .
111	PH Work:Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.25mm dia PVC ASTM pipe (sch-80)
112	32mm dia PVC ASTM pipe (sch-80)
113	40mm dia PVC ASTM pipe (sch-80)
114	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25mm dia C - PVC pipe
115	Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank
116	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
117	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
118	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
119	15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)
120	25mm dia brass full way valve (Shakti make)
121	32mm dia brass full way valve (Shakti make)
122	40mm dia brass full way valve (Shakti make)
123	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
124	gyser ELM-WHT-V006
125	WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)
126	15mm CP Extension Piece
127	125mm CP grating
128	15mm size C.P. flange
129	20mm dia CP consealed stop cock (Con-CHR-083KN Jaquar Make)
130	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
131	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
132	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
133	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
134	110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
135	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
136	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
137	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
138	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
139	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
140	110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
141	110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
142	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
143	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
144	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.Fixing 580mmx440mm Orissa pan (Hindware/Parryware/Neycer make)
145	Supplying all materials, labour T&P and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
146	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeOne piece commod(Hindware)ELEMENT Cat No.92084.
147	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-chargeHalfpedestal basin(560x450)Hindware No.91049+91115
148	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap, PVC waste pipe and painting brackets including supply of cement concrete, mortar etc all complete as per instruction of Engineer-in-charge. 24\\" x 18\\" x 10\\" Sink with Sink Cock/Bib Cock jayna make
149	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail (Plaza/ Johnson Make)
150	CP Towel Ring ( Jaquar ) ACN-ACR-1121N
151	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP guard rails (Jaquar)AKP-CHR-35771P
152	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type)
153	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder (Jaquar) CAN-ACR-1131N
154	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm CP revolving shower ( Jaquar ) CON-CHR-209KN
155	Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
156	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
157	Supplying all materials labour T&P filling sand in laboratories well watered and rammed including lead of materials to work site.
158	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
159	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
160	Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( Vitrified floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cm
161	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
162	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( Vitrified mat finish wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cm
163	Granite
164	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge.
165	Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge.
166	Ext. S/D Portion(EXTERNAL)Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia P.V.C. pipe
167	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
168	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
169	Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover
170	Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
171	1 no 50 Users Septic tank Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. 5.90 x 3.30 x 1.50 =
172	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 5.90 x 3.30 x 1.00 =
173	Supplying all labour T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
174	Supplying all labour T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.5.90 x 3.30 x 0.225
175	Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. 4.75 x 2.15 x 0.15 =
176	Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.
177	Rigid & smooth centering & shuttering for RCC work including false work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m height4.00 x 1.40 = 5.62(4.75+2.15) x 0.15 =2.07
178	Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:4) in foundation and plinth including watering and curing and lead of materials to site.L.W. = 2 X 5.00 X 1.50 X 0.50 =S.W. = 2 X 1.40 X 1.50 X 0.50 =L.W. = 2 X 4.75 X 1.20 X 0.375 =S.W. = 2 X 1.40 X 1.20 X 0.375 =Partition wall 1.40 X 0.25 X 2.00 =
179	Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.Inside 2(4.00+1.40) X 2.70 =Bottom 4.00 X 1.40 =
180	Supplying all materials labour T&P and providing 12mm thick C.P (1:6) including watering curing and conveyance of all materials to site.(out side)2(5.00+2.40) X 1.50 = 22.202(4.75+2.15) X 1.20 = 16.562(5.00+2.40) X 0.125 = 1.85Top 4.75 X 2.15 = 16.21
181	Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. Same as plaster
182	Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
183	Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
184	Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 5.90 x 3,30 x 0.30 =
185	14,000 ltr capacity R.C.C. Under ground sump Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1x 3.36 X 3.36 X 1.50 =
186	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 1 X 3.36 X 3.36 X 0.50 =
187	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.2 x 3.36 x 0.15 x 1.60 =1.612 x 3.06 x 0.15 x 1.60 =1.47
188	Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC. 1 x 3.36 x 3.36 x0.15 =
189	Rigid & smooth centering & shuttering for RCC work including false work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m heightRoof1 X 2.80 X 2.80 = 7.842(3.06+3.06) X 0.10 = 1.224Wall2(2.80+2.80) X 2.00 = 22.402(3.06+3.06) X 2.00 = 24.48
190	Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. 5.12 cum x 2.50 x 35.32 = 452.09 kg say Rs -
191	Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete. 1 x 3.36 x 3.36 x 0.15 =
192	Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.Floor1 X 3.36 X 3.36 X 0.10 = 1.129Roof1 X 3.06 X 3.06 X 0.10 = 0.936Wall2 X 3.06 X 0.13 X 2.00 = 1.5922 X 2.280 X 0.13 X 2.00 = 1.186
193	Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.Inside1 X 2(2.80+2.80) X 2.00 = 11.20Floor1 X 2.80 X 2.80 = 7.84Outside1 X 2(3.06+3.06) X 0.06 = 0.734
194	Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.2 (28.0+2.80) x 2.00 =22.41 x 2.80 x 2.80 =7.84
195	Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessoriesLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore00 mtr to 30mtr
196	30 mtr to 45mtr
197	Drilling of 150mm dia bore46 mtr to 210
198	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.200mm dia PVC pipe00 mtr to 45 mtrs
199	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe
200	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
201	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH Rig
202	Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:Rocky terrain with boulder formation for 300m depth
203	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
204	DOL Control panel
205	40mm dia steel short piece
206	Well cap
207	50mm size CI bracket
208	2.50sqmm flat cable
209	20mm dia rigid UPVC pipes
210	Steel rope with cover
211	Labour charges for lowering including transportation
212	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make)
213	Rain Water Harvesting SystemSupplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.110mm U-PVC SWR Pipe (Ashirvad/Supreme Make)
214	110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make)
215	110mm U-PVC Socket (Ori Plast/Finolex/Supreme Make)
216	125mm CP grating
217	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge150mm dia P.V.C.
218	Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
219	Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover
220	Electrical Work:INTERNAL Sub-Head I (modular Wiring Items)Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.GROUP-A
221	GROUP-B
222	GROUP-C
223	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
224	Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
225	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
226	Supplying,fixing of 2x6A Plug on the separate board with complete fitting by 01 no of 2 nos 6A switch & socket(modular type) ( flame retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
227	Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
228	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (2X1.5+1X1.5)
229	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (2X2.5+1X1.5)
230	Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit (2X4+1X1.5)
231	Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(4X6+2X4)
232	Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
233	Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
234	S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
235	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)
236	S/F of 1x1.5 sqmm Single core Multistrand FRLS copper Conductor in existing conduit (For Inverter Wirng
237	Sub-Head II (Light fitting Fixture & Fan)Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
238	Supplying, installation, testing and commssioning of 1200 mm sweep Copper wound BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix /Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.
239	Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (2 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 2 years.
240	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 15 W Rimless LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 3500-4000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
241	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
242	SITC of energy efficient LED Bulb light fittings having power rating not more than 15 watt and lumen output not less than 1500 lumen complete having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
243	Supplying, installation, testing and commssioning of 400 mm sweep Copper wound Wall Mounted fan with plastic blades having wattage not more than 55 W and RPM>1350 Make-Crompton /Havells /Usha /Bajaj ) including wiring as required as per direction of Engg.-in-Charge,Replacement Warranty will be 2 years.
244	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
245	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
246	BDBS,DB,AC DB,FLOOR PANELS,MCBSSupplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB Itus as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
247	Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9./ABB SB 200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 years.
248	Supplying and fixing 40 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 1 years..
249	(Earthing) INSTALLATIONSITC Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge.
250	Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/ABB
251	Providing and fixing 8 SWG (4 mm) dia copper wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required.
252	AIR CONDITIONER & INVERTERSupply of A,C with indoor and outdoor unitSupply, installation , testing, commissioning of 1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000)with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi/Carrier)
253	FRAME WORKSupply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.1 TR to 3 TR high wall split A.C
254	DRAIN PIPINGSupply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.25mm nom. Dia pipe
255	STABILIZERSupply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek
256	INVERTERSupply, installation of 2.5 KVA/36V inverter of Luminous Make with 2 Nos of 200 AH Battery Cruze+ 2.5 KVA-36V
257	EXTERNAL ILLUMINATIONSupply of 6 mtr long hot dip Galvanized PU Painted Octagonal pole manufactured from HT steel(single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge.
258	Supply, Installation, Testing and Commissioning of 60 watt LED All-In-One solar streetlight with high efficiency mono crystalline solar PV module, LiFePO4 battery with inbuilt BMS technology, MPPT charge controller, aluminu extruded body IP65 with serviceable battery compartment, high efficacy LED >150LPW and PIR dimming provided for optimizing battery autonomy.(Make- Panasonic/ Compton/Baja/Havells) Replacement Warranty will be 2 years. Waaanty Certificate to be Submitted to office of Engg-In-Charge
259	Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.
260	Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.The entire earthing system should be Replacement Warranty will be 2 years
261	Providing and fixing 6 SWG G.I. wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required.
262	LIGHTNING PROTECTION SYSTEMLightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/ABB
263	Supply of Roof conductor holder for parapet- PolyamideConductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/ABB
264	Supply of Polyamide roof cable holder for flat roof:DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/ABB
265	Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn/ABB
266	Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn/ABB
267	Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.Tested as per IEC 62561. Make-OBO/Dehn/ABB
268	Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn/ABB
269	Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/ABB
270	Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.Tested for 100kA lightning current. Make- : OBO/Dehn/ABB
271	Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr HeightFor Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/ABB
272	Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/ABB
273	Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/ABB
274	Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece fromhot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn/ABB
275	Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/ABB
276	Supply of UL Listed maintenance free , Low carbon coppercoated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn/ABB
277	Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn/ABB
278	Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/ABB
279	Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn/ABB
280	Installation of The above arrangements including all accessories as per Direction of Engg. In charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 2 Nos Of Twin . D Type N.H. Staff Quarter Under Nh Division Deogarh For 2025-26., Deogarh-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of 2 Nos Of Twin . D Type N.H. Staff Quarter Under Nh Division Deogarh For 2025-26., Deogarh-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us