Tender For Provision Of 300 Seats Auditorium At Danapur Cantt, Patna-Bihar

TDR : 56085309

Tender Notice
BOQ

32 Days Left

Patna , Bihar

Tender Brief : Tender For Provision Of 300 Seats Auditorium At Danapur Cantt

Document Fees
₹ 3000 /-

EMD
₹ 919150.0 /-

Tender Value
₹ 11.88 Crore /-

Submission Date
24-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	SCHEDULE \\"A\\"
2	Sch 'A' Part-I (Building Work) Lump sum price worked out by the contractor for (Building Work) as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.
3	Sch 'A' Part-II (External Electric supply) Lump sum price worked out by the contractor for (External Electric supply) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.
4	Sch 'A' Part-III (External Water supply) Lump sum price worked out by the contractor for (External Water supply) as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.
5	Sch 'A' Part-IV (Road Path Culvert) Lump sum price worked out by the contractor for (Road Path Culvert) as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.
6	Sch 'A' Part-V (Sewage Disposal) Lump sum price worked out by the contractor for (Sewage Disposal) as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.
7	Sch 'A' Part-VI (Area Drainage) Lump sum price worked out by the contractor for (Area Drainage) as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.
8	Sch 'A' Part-VII (Security Wall) Lump sum price worked out by the contractor for (Security Wall) as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.
9	Sch 'A' Part-VIII (Water cooler) Lump sum price worked out by the contractor for (Water cooler) as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.
10	Sch 'A' Part-IX (Fire Alarm Detection System) Lump sum price worked out by the contractor for (Fire Alarm Detection System) as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.
11	Sch 'A' Part-X (Fire Fighting System) Lump sum price worked out by the contractor for (Fire Fighting System) as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.
12	Sch 'A' Part-XI (Lightning Protection) Lump sum price worked out by the contractor for (Lightning Protection) as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.
13	Sch 'A' Part-XII (Demolition of bldg Work) Lump sum price worked out by the contractor for (Demolition of bldg Work) as listed in Schedule 'A' Part-XII against the lump sum price inserted by the MES.
14	Sch 'A' Part-XIII (PA System) Lump sum price worked out by the contractor for (PA System) as listed in Schedule 'A' Part-XIII against the lump sum price inserted by the MES.
15	Sch 'A' Part-XIV (Internal Electrification) Lump sum price worked out by the contractor for (Internal Electrification) as listed in Schedule 'A' Part-XIV against the lump sum price inserted by the MES.
16	Note for Srl No 07 to 19The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 07 to 19 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule
17	Schedule 'A' Part-XV (Miscellaneous items of works)
18	External Electrical supply
19	Item No 2 : Supply and installation of copper wound transformer step up/ step down, outdoor type including plinth platform of size 2.4 x 2.4 x 1.2 Mtr complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:2026 of capacity 400 KVA (Level 3) including all accessories complete all as specified and as directed.
20	Item No 03 : Supply, laying, in trenches /ducts/fixing on pole/STR with suitable size of GI clamps made out of GI strip 32 mm x 6 mm, XLPE insulated, screened, earthed, PVC bedded, galvanised steel strip, electric power cable (heavy duty) of size 3 x 95 sqmm with aluminium conductor suitable for 11 KV (E) grade as per relevent IS including latest amendment for IS (ISI marked cable) testing, commissionong along with S&F HT cable route indicatorat every 100mtrs with suitable foundation complete all as specified and directed .
21	Note:- (a) Earth work, EHV cable cover, sand coushioning & GI pipe will be measured and paid seperately. (b) High voltage test to be conducted at site with suitable voltage before and after laying of HT cable and reading shall be recorded jointly and test report to be submitted in triplicate to the Engineer-in-Charge. The cost of the same shall be deemed to be included in the unit rate quoted above.
22	Item No 04 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed. 3.5 core x 300 Sqmm
23	Item No 05 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.3.5 core x 240 Sqmm
24	Item No 06 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.3.5 core x 120 Sqmm
25	Item No 07 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.3.5 core x 50 Sqmm
26	Item No 08 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.3.5 core x 35 Sqmm
27	Item No 09 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.4.0 core x 25 Sqmm
28	Item No 10 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.4.0 core x 16 Sqmm
29	Item No 11 : Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.2.0 core x 10 Sqmm
30	Item No 12 : S & F hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixied on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and as directed.
31	Item No 13 : Supply and Installation Galvanized steel high mast lighting system of 16 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, Orientation Symmetric,Suitable for Wind Speed 180 KMPH,Movable lantern carriage,Double drum Winch-6 mm( 316 Grade S S Hoisting Ropes of 7/19 construction),Trailing Cable –1 per mast
32	(5 Core 2.5 Sq mm) with flexible conduit including installation, Testing & Commissioning Casting of foundation for High Mast & Panel @10T/sqm soil bearing Farthing for High Mast & Panel,Bolt & Nuts with double washer,,LED Aviation light. Model: GLN 703,Feeder Panel including suitable MCB,supply and fixing of 150W LED floodlight 8 No’s made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with 30-60D,Beam angle, IP66 protection, Complete all as specified and directed.
33	Item No 14 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of suitable size made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 40 x 40 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.
34	INCOMMING
35	(a) Aluminium strip busbar of 1200 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (Incomming Bus bar for double through cable)
36	(b) ACB 4 pole, 415 V manual Draw outdoor type with micro processor release of capaicty 800 Amps, Make : Legrand /L&T /Siemens or equivelent:- 01 Set (Tr Incomming)
37	(c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.
38	(d) Digital Ammeter of range (0-1000) Amps, flush mounting type with CT’s of ratio 1000/5 and selector switch – 01 set.
39	(e) Digital voltmeter of range (0-500) volts, flush mounting type with selector switch – 01 No.
40	OUTGOING
41	(a) Copper strip busbar of 1200 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (outgoing Bus bar)
42	(b) ACB 4 pole, 415 V manual Draw outdoor type with micro processor release of capaicty 630 Amps, Make : Legrand /L&T /Siemens or equivelent:- 01 Set (O/G for AMF panel)
43	(c) 4 Pole MCCB 250 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 No (One no for FF S/S & one for spare)
44	(d) 4 Pole MCCB 100 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 No (Spare)
45	(e) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -04 set (set of three) Make :- Legrand/L&T/Schneider.(For each O/G)
46	(f) Digital Ammeter of range (0-800/300/150) Amps, flush mounting type with CT’s of ratio 250-800/5 and selector switch – 04 set.(For each O/G)
47	(g) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.
48	Item No 15 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of suitable size made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 40 x 40 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.
49	INCOMMING
50	(a) Aluminium strip busbar of 800 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (Incomming Bus bar for double through cable)
51	(b) ACB 4 pole, 415 V manual Draw outdoor type with micro processor release of capaicty 630 Amps, Make : Legrand /L&T /Siemens or equivelent:- 01 Set (I/C from AMF panel)
52	(c) 4 pole ON LOAD Changeover switch 415 volts in sheet metal encolsure of capacity 630 Amps including all fixing accessories with both ends spreader links - 01 No.(Spare if AMF panel failed)
53	(d) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.
54	(e) Digital voltmeter of range (0-500) volts, flush mounting type with selector switch – 01 No.
55	OUTGOING
56	(a) Copper strip busbar of 800 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos
57	(b) 4 Pole MCCB 400 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 36 KA breaking capacity including all fixing accessories with both ends spreader links -03 Nos (One for Main Auditorium, One for AC Plant & One for Spare)
58	(c) 4 Pole MCCB 100 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 Nos (One for FF S/S & one spare)
59	(d) 4 Pole MCCB 63 Amps, adjustable thermal magnetic release type, 4 pole, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -01 No (For Street light feeder piller box)
60	(e) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -06 set (set of three) Make :- Legrand/L&T/Schneider.(For each O/G)
61	(f) Digital Ammeter of range (0-800/300/150) Amps, flush mounting type with CT’s of ratio 100-500/5 and selector switch – 06 set.(For each O/G)
62	(g) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.
63	Item No 16 : Supply ,fabrication, installation and testing of LT Panel In door type factory made CPRI Approved, water and vermin proof protection of suitable size made out of 2.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 45x 45 x5mm vertical frame and legs with mild steel flat iron 45 x 45 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.
64	INCOMMING
65	(a) Copper strip busbar of 650 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos
66	(b) 4 pole MCCB 320 Amps , adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 01 No.
67	(c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.
68	(d) Digital Ammeter of range (0- 400) Amps, flush mounting type with CT’s of ratio 250/5 and selector switch – 01 set.
69	(e) Digital voltmeter of range (0-500) volts, flush mounting type with selector switch – 01 No.
70	OUTGOING
71	(a) 4 Pole MCCB 100 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 Nos
72	(b) 4 Pole MCCB 63 Amps , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 25 KA breaking capacity including all fixing accessories with both ends spreader links -02 Nos
73	(c) MCB TPN 32 Amps C series , adjustable thermal magnetic release type, 4 poles, 415 Volts, Ics = 100% Icu, 10 KA breaking capacity including all fixing accessories with both ends spreader links -02 Nos
74	(d) MCB SPN 20 Amps C-series, 10 KA breaking capacity including all fixing accessories with both ends spreader links -02 Nos
75	(e) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.
76	Item No 17 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 700mm x 600mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 45 x 45 x 5 mm vertical frame and legs with mild steel flat iron 45 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.
77	INCOMMING
78	(a) Copper strip busbar of 200 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos
79	(b) 4 pole MCCB 63 Amps , adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 25 KA including all fixing accessories with both ends spreader links - 01 No.
80	(c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.
81	(d) Digital Ammeter of range (0- 100) Amps, flush mounting type with CT’s of ratio 250/5 and selector switch – 01 set.
82	(e) Digital voltmeter of range (0-500) volts, flush mounting type with selector switch – 01 No.
83	OUTGOING
84	(a) MCB TPN 32 Amps , 10 KA breaking capacity, C-series including all fixing accessories with lugs -03 No
85	(b) MCB SPN 6-32 Amps, 10 KA breaking capacity, C-series including all fixing accessories with lugs -02 No
86	(c) Multifunctional Digial type timer Switch (Astro type having longitude and latitude of Indian cities memory) 240 volts AC Single Phase - 01 No
87	(d) Power contractor 4 Pole, 40 Amps, 415 Volts, 50 Hz - 01 No
88	(e) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.
89	Item No 18 : M & L for horizontal boring mechanically across the existing road without disturbing the road surface for inserting 80 mm bore GI pipe all complete all as specified and as directed by EIC. ( Note :- GI pipe will be measured and paid respective item of sch'A').
90	Item No 19 : M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 450 x 450 mm complete all as specified and directed. Note for Item : After completion earth resistance shall be recorded with earth megger and the record should be submitted to to department duly signed by contractor.
91	Item No 20 : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
92	Lightning Protection
93	Item No 21 : Supply and fixing of Earthing using copper plate earth plate electrode 60cm x 60cm x 3.15 mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to copper earth lead strip of 32 X 6 mm by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete (Note : Main earth lead beyond 7.5 meter shall measured and paid saperatly. )
94	Demolition
95	Item No 22 : Taking down carefully main switches DB's/ MCB DB's with MCB including Sub main wiring complete all as specified and as directed.
96	Item No 23 : Taking down street light pole including street light any capacity including all fittings and to store for keeping in safe custody or for taking credit complete all as specified and as directed.
97	Item No 24 : Taking down indoor/outdoor type LT feeder piller pannel any size including all fittings and to store for keeping in safe custody or for Reuse and fix in other location complete all as specified and as directed.
98	Item No 25 : Taking out old unserviceable LT cables of cross sectional area any size including excavation,returning filling, pipes bricks or pre-cast concrete cable cover etc of any description from trenches / walls / poles by disconnecting the cable from pole /feeder /panel board etc. and keep serviceable bricks or pre-cast concrete cover, cable, pipe etc. to store for keeping in safe custody or for taking credit complete all as specified and as directed.
99	Item No 26 : Taking up or down CI/GI/DI water tubing any size and connecting items including valve any size complete all as specified and directed.
100	Item No 27 : Taking down C/Fan, E/Fan, Wall mounted fan, Gyser any size including connecting materials complete all as specified and directed. Note : removing materials shall be handover to MES Store for future disposal action.
101	External Water supply
102	Item No 28 : Suply, fixing, installation and commissioning Monoblock pump set suitable for 415 V ,3 phase system suction and delivery 80mm having capacity 5 HP complete all as following specification.PUMP TYPE- MonoblocSPEED- 2900 (RPM)FREQUENCY -50 HZNO. OF STAGES 1HEAD MINIMUM - 10 MTRHEAD MAXIMUM -22 MTRDISCHARGE MINIMUM -10 LPSDISCHARGE MAXIMUM -22 LPSIMPELLER- C.I. Gr. FG-200 OF IS:210DELIVERY CASING- C.I. Gr. FG-200 OF IS:210MOTOR BODY- C.I. Gr. FG-200 OF IS:210PUMP SHAFT- S.S. Gr. X12CR12 OF IS:1570 Part-5SEALING- Mechanical Seal
103	Item No 29 : Suply, fixing of 80mm of foot valve PN 0.2, cast iron body, brass/SS strainer, and flap, heavy duty, suitable for vertical installation at bthe suction side of the pump , confirming to IS:4038. The valve shall be tested to required pressure and installed complete with necessary fitting, nuts, bolts and rubber insertion as directed by the Engr-in-charge
104	Item No 30 : Supply and installation pump starter electric control panel board, for out door use, DOUBLE door dust & vermin proof floor mounted made out of CRCA steel sheet of 3.15 mm thick angle iron legs of suitable size, having electrolytic high conductivity insulated bus bar made out of aluminium strips of rating 100 Amps for 3 phase, 415 Volts, 50 C/S 4 wire system, with cable enty jprovision, with suitable lugs gland, voltmeter, Ammeter and phase indicator complete, duly painted with two coats of stove enameled power coated paint over a coat of red oxide primer complete all as including necessary PCC work of height 300 cm from the ground level including disconnecting/taking out old existing unsv pump panel complete all as specified and directed of the following :-
105	INCOMMING :-(a) MCCB, 4 pole, 415 Volt, 40 Amps, 16 KA - 01 No(b) 3 Phase LED Voltmeter, class - 0.5 - 01 No(c) 3 Phase LED Ammeter, class -0.5 - 01 No(d) LED Indicator lamp in three colour RYB - 01 SetOUTGOING :-(a) MCCB, 3 pole, 10 KA c Curve 415 volts, 32 Amps -01 No(b) DOL starter for pump set 5.0 HP-02 Nos
106	Item No 31 : Supply and lay pipe ductile Iron , S/S including specials, Class “K-7” ,100 mm (4”) dia complete all as specified and as directed.
107	Item No 32 : M & L for Construction of brick masonry valves pits, of the following internal dimension complete with 3.15 mm thick MS sheet cover angle iron frame duly painted with locking arrangement including all necessary excavation and earth work PCC work complete.(a) 900 mm x 900 mm x 900 mm
108	Item No 33 : M&L for Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 450 x 450 mm complete all as specified and directed. Note for Item : After completion earth resistance shall be recorded with earth megger and the record should be submitted to to department duly signed by contractor.
109	Water cooler
110	Item No 34 : Supply and installation of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified.
111	Central Air Conditioning Please Enable Macros to View BoQ information Schedule 'A' Part I (Building Works) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
112	Central Air Conditioning Please Enable Macros to View BoQ information Schedule 'A' Part I (Building Works) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
113	Item No 01 : Construction of Audotorium, AC plant room and AHU rooms complete all as specified drawings and tender documents.
114	Item No 02 : Construction of Covered Parking shed for 40 Cars consisting of 03 block of 12 cars and 01 block of 04 cars complete all as specified in drawings and tender documents.
115	Item No 03 : Construction Sentry post complete all as specified in drawings and tender documents.
116	Item No 04: Construction of Hard standing for transformer complete all as specified in drawings and tender documents.
117	Item No 05 : Construction duty room and fire pump room complete all as specified in drawings and tender documents. Total carried over to BOQ Rs. 0.0 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part II (External Electric supply) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
118	M&L for Supply, test, erection & commissioning of Steel tubalar swaged poles staying in a truely vertical position till the foundations are properly set with the help crane complete with cast iron base plate, finial taper plug, bolts, nuts & screws including drilling of holes to poles for clamps & hooks for running of earth wire/Strip complete all as specified type 410 SP-55,11 mtrs HT poles complete all as directed by Engr-in-Charge. Note:-(i)Crane charges for erection shall be deemed to be including in quoted rate.(ii) Earth work,PCC,coping shall be measured and paid separately.(iii) The rates include staying the poles in a truely vertical position till the foundations are properly set.(iv)The rates include cast iron base plate,nuts,bolts,screws,painting of steel tubular poles,drilling of holes in steel tubular poles for fixing of clamps,hooks for continuous earth wire/strip. Supply, test, install & commissioning of HT 11 KV outdoor type gang operated air break switch triple pole mechanically operated suitable for horizontal or vertical mounting(suitable for existing one) on insulator and steel frame with operating mechanism worked from ground level for current rating up to 200 Amps and connecting up with jumpers, testing and commissioning complete all as directed by Engr-in-Charge. Each set 9435.1 1.0 9435.1
119	Supplying, fixing, connecting and testing , single pole zinc oxide (gap less surge type), heavy duty, station class, self supporting outdoor type lighting arresters having rated voltage 09 KV (RMS), discharge current 10 KA insulation level 28/75 KV/KVp (peak) suitable for rated system voltage of 12 KV supply system with maximum continuous operating voltage (MCOV) not less than 7.65 KV (RMS) with highly non linear ceramic resister made of zinc oxide in dermetically sealed container, complete, with metal base, base insulator and suitable terminals for ground connections and pressure relieving arrangement, fixing with suitable nuts, bolts and washers etc complete all as specified and directed.
120	M& L pin type/post top , porcelain, vitreous, white, brown or green insulator, 150 mm height, 150 mm dia for 11 KV grade including one galvanised iron washer, nut and pin complete all as specified and as directed..
121	M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.
122	Supply, stringing and fixing of Aluminium conductor steel reinforced (ACSR) OH conductor of any type including binding wire complete all as specified and as directed.
123	M&L 20mm dia stay rod including Stay assembly complete with accessories as shown in electrical plate No. 1 complete all as specified and as directed.
124	M&L Loop type insulator, vitreous porcelain,white, brown or green Small size, with overall dimensions 65 x 90mm, clearance of hole 16mm complete all as specified and directed.
125	M&L for Cable jointing kit for 11 KV (earthed) grade cable for outdoor end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 to 95 Sqmm including taking out old u/s one complete all as directed
126	M&L for Cable jointing kit for 11 KV (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 to 95 Sqmm complete all as directed by Engr-in-charge .
127	M&L for Cable jointing kit for 11 KV (earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 to 95 Sqmm complete all as directed
128	M & L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25 x 20 cm size complete all as specified and directed.
129	Supplying, erecting and fixing in replacement of steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 mtrs long) including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2\\" (inch) wide complete all as specified and directed.Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.
130	Supply and fixing of LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and including connection from Junction Box complete.
131	Supply and fixing of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
132	Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
133	Excavation in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil etc complete all as specified and directed.
134	Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
135	Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
136	M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and directed.
137	M & L for Old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.
138	Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm all as specified and directed by Engr-in-Charge.
139	M/L in repairs for cement concrete in foundation (1:4;8) type D2 using 40 mm graded broken stone aggregate for base of foundation complete as specified
140	M/L in repairs for cement concrete in foundation (1:3;6) type C2 using 40 mm graded broken stone aggregate including form work complete as specified
141	M/L in repairs for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed.
142	Supply and fixing of GI tubing, light grade, 80 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified and directed.
143	Supply and laying GI tubing light grade of size 40 mm for cable protection on road/drain/floor/pole including necessary clamps 40x4mm. Total carried over to BOQ Rs. 1433378.66 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part III (External Water supply) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
144	Suply,fixing of 80mm Non-returnable Butterfly Valve, PN 16, wafer type, cast iron body with stainless steel disc and EPDM liner, suitable for bidirectional flow, lever operated, confirming to IS/BS standards. The valve shall be suitable for use in water supply pipe lines, tested to required pressure, and installed as directed.
145	Supply, fixing & laying 80 mm GI tubing Heavy class with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed.
146	Supply, fixing & laying only GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size :- 80 mm bore GI pipe RM 760.5 60.0 45630.0 50 mm bore GI pipe RM 421.2 100.0 42120.0 25 mm bore GI pipe RM 196.0 200.0 39200.0 20 mm bore GI pipe RM 169.0 150.0 25350.0 15 mm bore GI pipe RM 143.0 100.0 14300.0
147	Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes:- 50 mm bore Each 979.08 6.0 5874.48 25 mm bore Each 587.24 6.0 3523.44 20 mm bore Each 540.11 10.0 5401.1 15 mm bore Each 505.45 10.0 5054.5
148	Supply and fix cast iron flanged sluice valve of size 100 mm bore class 1.6 PN installed complete with gun metal spindle and hand wheel all as specified and directed.
149	Supply and fix cast iron flanged sluice valve of size 80 mm bore class 1.6 PN installed complete with gun metal spindle and hand wheel all as specified and directed.
150	M & L for cutting Cast iron pipe in position for inserting of new tees branches etc upto 100 mm bore of pipe complete all as specified
151	M & L for Cast iron fitting upto 150 mm dia for Bends,Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified
152	Supply and fix , butterfly Valve conforming to IS 13095,80 mm (3”) dia. complete all as specified and directed.
153	Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe in soft / loose type of soil and getting out complete all as specified.
154	Returning filling in, including spreading, leveling watering & well ramming in layers not exc 25cm thick complete all as specified and directed by EIC.
155	Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed. Total carried over to BOQ Rs. 374921.55 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part IV (Road Path Culvert) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
156	Excavation over areas n exc 1.5 m deep and getting out in soft/loose soil.
157	Rolling and consolidation of formation surfaces with 8 to 12 tonne power roller all as spd and directed.
158	Laying and compacting 150mm thick (compacted thickness) Granular Sub Base (GSB) grading as per Grade I as specified Table 400-1 of MoRTH specifications for Road and Bridge works 2013 in a single layer over compacted subgrade with natural sand crushed gravel, crushed stone crushed slag or combination thereof as per the gradient required. The materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity and rolling with vibratory roller of capacity 80-100 KN static weight for achieving requied compaction density atleast 98% of the Maximum Dry Densty Consolidating to require gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specification for road and bridge works 2013
159	Laying and compacting 150mm thick (compacted thickness) WMM laid in two layers of 75mm each grading as per table 400-13 of MoRTH specifications l comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling vibratory roller of capacity 80-100 Kn static weight and consolidating to a required gradient and camber compelete all as specified and directed. The finished surface tolerrances to be as per table 900-1 of MoRTH speifications for Road and Bridges works 2013
160	M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, weeeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose diret etc complete all as spd and directed.
161	M&L applying evenly a priming/tack coat with bitumeneous primer at 10 kg/10 Sqm using (VG -10) paving bitumen complete all as spd and as directed
162	M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using bitumen Vg 30 Grade @ 4% by weight of aggregate including scrafying existing bituminous macadam and rolled with 8 to 10 tonne power roller all as spd.
163	M &L for laying of Bituminous premix semi dense asphaltic concrete using mechanical paver 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller,on existing black top surface complete all as spd and directed.
164	Removing excavated material exc 50 M but n.exc 100 m and depositing were directed at a level nexc 1.5m above the the starting point all as spd and directed.
165	M & L 100 mm thick Hard core of gauge n.exc 63 mm of broken stone or boulders, deposited spread & levelled in layers n.exc 15 cm thick watered & rammed to a true surfaces all as speified and directed.
166	M & L100mm thick PCC 1:4:8 type D-2 (using 20 mm graded stone aggregate) as in sub base of path complete all as spd and directed.
167	M&Lsand filling under floors laid in layers n. exe 15cm thick spread levelled and rammed including watering all as spd.
168	M&L for Heavy duty precast Machine pressed precast conctete interlocking paver block ruberized moulded any shape and size confirming to IS 15658- 2006 of 80 mm thickness, M-40 Grade fixed with gray cement and pigment complete all as spd and directed. Total carried over to BOQ Rs. 6540036.21 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part V (Sewage Disposal) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
169	Excavating over areas n exc 1.5m in depth for foundation etc. and getting out in soft/loose soil.
170	Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.
171	Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point
172	M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified
173	M&L for brick work with old size bricks (sub class 'B' bricks) straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
174	M&L for concrete bed in P.C.C. 1:4:8 type D2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of the 150 mm dia pipes after laying & testing complete all as specified and directed for the following dia of pipes.
175	M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in roof curb mud stops, coping benching and surface channel and for similar work including necessary formwork complete all as specified and directed.
176	M&L for Rendering 15 mm thick in cement mortar 1:4 on concrete surfaces specified and directed .
177	Extra for forming fair finished drain or channel using extra cement including forms moulded Upto 30 cm inner grith. etc complete all as specified and directed for the following inner girth of drain.
178	M&L for MS TMT bar 10 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.
179	M&L for precast RCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in manholes covers including form work etc set in CM 1:4 complete all as specified and directed. Total carried over to BOQ Rs. 254130.3 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part VI (Area Drainage) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
180	Excavation in trenches nexc 1.5m wide-curn and nexc 1.5m in depth for foundation and getting out in soft/loose soil all as specified and directed.
181	M&L for moorum/red bajri filling, spreading, levelling over field earth including watering, ramming, rolling and finishing to required size and shape as in berms etc complete all as specified and directed.Note : Moorum shall be brought from outside of MD land at contractor
182	M&L for PCC 1:4:8 type D-2(40 mm graded stone aggregates) as in foundations, filling and mass concrete sub base as in floors all as specified and directed.
183	M&L for brick work with fly ash bricks built in cement mortar 1:4 straight on plan using old size bricks all as specified and directed.
184	Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, mouds, mitred/ stopped ends complete all as specified and directed.
185	M&L for PCC 1:2:4 type B-1(using 20mm graded stone aggregates) as in coping of drains including necessary formwork etc all as specified and directed.
186	M&L for 15mm thick cement plaster on brick surfaces of drian in cement mortar 1:4 surface finished even and smooth without using extra cement all as specified and directed.
187	M & L foir PCC 1:3:6, type C-2 (using 20 mm graded aggregates) as in surface channel & drains complete all as specified and directed.
188	Returning, filling in including watering and well ramming in layers nexc 25cm thick all as specified and directed.
189	Removal of surplus soil to a distance nexc 50m and depositing where directed at a level nexc 1.5m above starting point all as specified and directed.
190	M&L for MS TMT bar 10 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed.
191	M&L for pre-cast RCC slabs as in manhole covers in 1:2:4 type B1 using 20 mm graded stone aggreghate, set in cement mortar (1:4) incl use and waste of form work complete all as speciied and as directed. Total carried over to BOQ Rs. 2884841.26 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part VII (Security Wall) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
192	Boring holes 3.5m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm)
193	Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundation, pier holes etc n. exc 10sqm on plan and getting out complete.
194	M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete.
195	M&L reinforced cement concrete M-25 design mix using 20mm graded stone aggreagate as in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete.
196	M&L reinforced cement concrete M-25 design mix using 20mm graded stone aggreagate as in columns, pillars, posts, struts etc complete.
197	M&L reinforced cement concrete M-25 design mix using 20mm graded stone aggreagate as in coping, beams, cantilevers, bressummers, Lintels over 1.5m span etc complete.
198	Form work to sides of concrete foundations, footings, bases of columns raft, beam sides and soffits (if any) of foundations & plinth beams and similar wk etc rough finished surface of concrete complete.
199	Form work to sides of pillars, posts, struts, piers, columns stachions flat with rough finished surface of concrete complete.
200	Form work to sides of concrete floor or roof beams, beam haunchings, bressummers, lintels, cantilevers, shelves including supports overhangs etc also sprays between floor beams, etc on flat with rough finished surfaces of concrete complete.
201	M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.
202	All as per item No above but 5 mm dia and over in stirrups, spacers and binders complete.
203	Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.
204	Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.
205	M&L 15mm thick cement plaster on fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete.
206	do- as per above item but other than fair faces.
207	M&L two coat of cement base paint over primer on wall including preparation of newly plastered surfaces.
208	S&F frame work of mild steel gate of selected design(ornamental) including necessary hold fasts, locking arrangement, prepared for hanging or sliding with and including either hooks and hinges etc complete all as specified and as directed by Engineer-in-charge(FE-410-
209	M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.
210	Returning filling in inclunding spreading levelling watering well raming in layers not exceeding 25 cm complete all as specified and as directed.
211	Removing excavated material exc. 50m but n exc 250m and depositing where directed at a level n.exc. 1.5 m above the starting point. Total carried over to BOQ Rs. 1679975.49 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part VIII (Water cooler) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
212	Supply , installation and Commissioning water cooler, Electric driven,(single phase 230 volts) having approx storage capacity of 120 Litres and nominal cooling capacity of 60 Litres per hour complete all as specified. Total carried over to BOQ Rs. 111315.66 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part IX (FIRE ALARM DETECTION SYSTEM) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
213	Supply, installation, testing and commissioning of analogue addrassable TWO loop \\"Main Fire Alarm Control Panel\\", expandable up to 10 loops with 99 detectors & modules & up to 200 detectors and modules per each loop. LCD display & QWERTY numeric keypad, power supply & 24 hrs battery back-up suitable for loop length 1.5 kmper loop complete all as specified and directed.
214	Supply, installation, testing and commissioning of detectors complying with and type certified to EN-45 intelligence as per IS 11360: 1985 complete all as specified and directed. addressable type smoke & heat detector photoelectric /optical with base (below false-ceiling) with self built
215	S&F remote response indicator flush mounted on false-ceiling / wall complete all as specified and directed.
216	Supply, installation, testing and commissioning of addressable type Manual Call Point (break glass type) complete E with push button, enclosed in box with provision for cable or conduit coupling, painted fire red outside, white inside and written 'In case of fire break glass' complete as specified and directed.
217	Supply, installation, testing and commissioning of addrassable type indoor Sounder cum Flasher with addressable control module and box consisting 8 different tone varients complete all as specified and directed.
218	Supply, installation, testing and commissioning of fault isolator module with required junction box complete all as specified and directed.
219	Supply, installation, testing and commissioning of control relay module with enclosure / junction box complete for third party integration complete all as specified and directed. Total carried over to BOQ Rs. 216167.0 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part X (Fire Fighting System) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
220	Supply, installation, testing and commissioning of fire pump diesel engine driven horizontal end-suction & top discharge, backpull out type centrifugal pump, conforming to IS: 12469-2011, with Cl casing, bronze impeller and stainless steel shaft, mechanical seal, etc. mounted on heavy duty bearings, couplings, zero access type coupling guard, etc. capable to deliver 2280 LPM at 70 m head. The pump shall be coupled to a water-cooled radiator, diesel engine of suitable BHP & speed, two sets of batteries of adequate rating with suitable for battery leads & stand, battery charger, residential silencer, diesel tank of capacity adequate for 6 hours of operation and fitted with level and exhaust silencer. The complete set shall be mounted on common base frame including foundation as per manufacturer's recommendation complete all as specified and directed.
221	Supply, installation, testing and commissioning of fire pump electric motor driven horizontal end-suction & top discharge, back pull-out type centrifugal pump, confirming to IS: 12469- 2011, with Cl casing, bronze impeller and stainless steel shaft, mechanical seal, etc. to deliver 2280 LPM at 70 m head coupled with a spacer coupling to a 2 pole TEFC type squirrel cage induction motor of suitable HP with IP 55 protection of enclosure at 2900 RPM speed, efficiency not less than 55%, suitable for operation on 415 V ±10%, 3-Phase, 50 Hz AC supply, horizontal foot-mounted type with class F insulation, confirming to S: 12615-2018, with coupling guard, foundation as per manufacturer's recommandation, etc. complete all as specified and directed.
222	Supply, installation, testing and commissioning of fire pump electric motor driven horizontal end-suction & top discharge, back pull-out type centrifugal booster pump, confirming to IS: 12469- 2011, with Cl casing, bronze impeller and stainless steel shaft, mechanical seal, etc. to deliver 450 LPM at 36 m head coupled with a spacer coupling to a 2 pole TEFC type squirrel cage induction motor of suitable HP with IP 55 protection of enclosure at 2900 RPM speed, efficiency not less than 55%, suitable for operation on 415 V ±10%, 3-Phase, 50 Hz AC supply, horizontal foot-mounted type with class F insulation, confirming to IS: 12615- 2018, with coupling guard, foundation as per manufacturer, complete all as specified and directed.
223	Supply, installation, testing and commissioning of fire pump electric motor driven horizontal end-suction & top discharge, back pull-out type centrifugal jockey pump, confirming to IS: 12469-2011, with Cl casing, bronze impeller and stainless steel shaft, mechanical seal, etc. to deliver 180 LPM at 70 m head coupled with a spacer coupling to a 2 pole TEFC type squirrel cage induction motor of suitable HP with IP 55 protection of enclosure at 2900 RPM speed, efficiency not less than 55%, suitable for operation on 415 V ±10%, 3-Phase, 50 Hz AC supply, horizontal foot-mounted type with class F insulation, confirming to S: 12615- 2018, with coupling guard, foundation as per manufacturer, complete all as specified and directed.
224	M & L for 1.1 kV grade aluminium conductor, XLPE insulated armoured cables of size 3.5 core 70 Sqmm, conforming to IS: 7098 (Part 1)- 1988 having stranded aluminium compact shaped conductor as per Cl. 2, IS: 8130 1984, PVC inner sheath, single armouring of galvanized steel strip/wire and PVC Type ST-2 outer sheath conforming to IS: 5831- 1984, including clamping and termination complete as specified and directed.
225	M & L for 1.1 kV grade aluminium conductor, XLPE insulated armoured cables of size 4 core 16 Sqmm, conforming to IS: 7098 (Part 1)- 1988 having stranded aluminium compact shaped conductor as per Cl. 2, IS: 8130 1984, PVC inner sheath, single armouring of galvanized steel strip/wire and PVC Type ST-2 outer sheath conforming to IS: 5831- 1984, including clamping and termination complete as specified and directed.
226	M & L for ISI marked MS ERW pipes 150 mm bore conforming to IS: 1239 (Part 1 & 2) with all accessories like all RM fittings including tees, elbows, reducers, union, flanges, rubber gaskets, Gl nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) with painting of one coat primer and 2 or more coats of synthetic enamel paint complete all as specified and directed.Note: (i) Standard MS fitting with welded joint shall be used.(ii) All hangers, clamps, brackets etc. shall be of galvanized iron.(iii) Welding of any kind on the galvanized support / hanger shall be permitted.(iv) Pipes of size more than 50 mm bore shall be bytt welded with fittings of equal or higher thickness whereas pipe below 50 mm bore size shall be socket welded.
227	M & L for ISI marked MS ERW pipes 100 mm bore conforming to IS: 1239 (Part 1 & 2) with all accessories like all RM fittings including tees, elbows, reducers, union, flanges, rubber gaskets, Gl nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) with painting of one coat primer and 2 or more coats of synthetic enamel paint complete all as specified and directed.Note: (i) Standard MS fitting with welded joint shall be used.(ii) All hangers, clamps, brackets etc. shall be of galvanized iron.(iii) Welding of any kind on the galvanized support / hanger shall be permitted.(iv) Pipes of size more than 50 mm bore shall be bytt welded with fittings of equal or higher thickness whereas pipe below 50 mm bore size shall be socket welded.
228	M & L for ISI marked MS ERW pipes 80 mm bore conforming to IS: 1239 (Part 1 & 2) with all accessories like all RM fittings including tees, elbows, reducers, union, flanges, rubber gaskets, Gl nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) with painting of one coat primer and 2 or more coats of synthetic enamel paint complete all as specified and directed.Note: (i) Standard MS fitting with welded joint shall be used.(ii) All hangers, clamps, brackets etc. shall be of galvanized iron.(iii) Welding of any kind on the galvanized support / hanger shall be permitted.(iv) Pipes of size more than 50 mm bore shall be bytt welded with fittings of equal or higher thickness whereas pipe below 50 mm bore size shall be socket welded.
229	M & L for ISI marked MS ERW pipes 65 mm bore conforming to IS: 1239 (Part 1 & 2) with all accessories like all RM fittings including tees, elbows, reducers, union, flanges, rubber gaskets, Gl nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) with painting of one coat primer and 2 or more coats of synthetic enamel paint complete all as specified and directed.Note: (i) Standard MS fitting with welded joint shall be used.(ii) All hangers, clamps, brackets etc. shall be of galvanized iron.(iii) Welding of any kind on the galvanized support / hanger shall be permitted.(iv) Pipes of size more than 50 mm bore shall be bytt welded with fittings of equal or higher thickness whereas pipe below 50 mm bore size shall be socket welded.
230	M & L for ISI marked MS ERW pipes 25 mm bore conforming to IS: 1239 (Part 1 & 2) with all accessories like all RM fittings including tees, elbows, reducers, union, flanges, rubber gaskets, Gl nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) with painting of one coat primer and 2 or more coats of synthetic enamel paint complete all as specified and directed.Note: (i) Standard MS fitting with welded joint shall be used.(ii) All hangers, clamps, brackets etc. shall be of galvanized iron.(iii) Welding of any kind on the galvanized support / hanger shall be permitted.(iv) Pipes of size more than 50 mm bore shall be bytt welded with fittings of equal or higher thickness whereas pipe below 50 mm bore size shall be socket welded.
231	Supply, installation, testing and commissioning of 150 mm bore PN 1.6 rated CI 'Y' -type strainer for suction conforming to IS: 907-1984 with SS filter screen and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories for suction side of fire pumps all complete as specified and directed.
232	Supply, installation, testing and commissioning of 100 mm bore PN 1.6 rated CI 'Y' -type strainer for suction conforming to IS: 907-1984 with SS filter screen and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories for suction side of fire pumps all complete as specified and directed.
233	Supply, installation, testing and commissioning of PN 1.6 rated Cl sluice valve 150 mm bore, conforming to IS: 14846-2000, with SS spindle conforming to IS: 6603-2001 and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed.
234	Supply, installation, testing and commissioning of PN 1.6 rated Cl sluice valve 100 mm bore, conforming to IS: 14846-2000, with SS spindle conforming to IS: 6603-2001 and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed.
235	Supply, installation, testing and commissioning of PN 1.6 rated Cl sluice valve 80 mm bore, conforming to IS: 14846-2000, with SS spindle conforming to IS: 6603-2001 and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed.
236	Supply, installation, testing and commissioning of PN 1.6 rated Cl sluice valve 65 mm bore, conforming to IS: 14846-2000, with SS spindle conforming to IS: 6603-2001 and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed.
237	Supply, installation, testing and commissioning of PN 1.6 rated CI swing check type reflux (non return) valve 150 mm bore, conforming to IS: 5312 (Part 1)-2004 with flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed
238	Supply, installation, testing and commissioning of PN 1.6 rated CI swing check type reflux (non return) valve 100 mm bore, conforming to IS: 5312 (Part 1)-2004 with flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed
239	Supply, installation, testing and commissioning of PN 1.6 rated CI swing check type reflux (non return) valve 65 mm bore, conforming to IS: 5312 (Part 1)-2004 with flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed
240	Supply, installation, testing and commissioning of pressure switch suitable for pressure range 0-14 bar having die cast aluminium construction and SS sensing element with ball valve, fittings viz. unions, collars, reducers etc.for fire pumpsets complete all as specified and directed.
241	Supply, installation, testing and commissioning of bourdon pressure gauge suitable for 0-14 kg pressure range with 4\\" dial, die cast aluminium body, ball valve, nipple, socket, etc. for delivery lines of fire pumpsets near the flow switches all complete as specified and directed
242	S & F GI Strip 32x6mm as earth lead fixed to wall
243	S & F gunmetal fire hydrant single landing valve with 80 mm bore flanged inlet, brass spindle controlled 63 mm NB female instantaneous outlet type gunmetal coupling, blank cap, chain, twist release type lug & all accessories conforming to IS:5290-1993 including fixing with anchor fastner and flanged tapping from wet riser and pressure gauge with gunmetal ball valve complete all as specified and directed.
244	S & F indoor type wall-mounted lockable hose cabinet made of 18 gauge MS sheet with double door and 3 mm thick glazed glass with water proof rubber beading. it shall be in red out side and white inside with two coats of enamel paint over a coat of primer. \\"HOSE CABINET NO.\\" shall be painted on the inner face of the glass in 50 mm size block letter. Cost shall include the cost of break glass box containing the key of the cabinet. Size of Cabinet shall be suitable to house 2 Nos. of 15 m RRL hose and 2 Nos. branch nozzles. Cabinet size 600 mm (H) x 800 mm (L) x 250 mm (D) complete all as specified and directed.
245	S & F non-percolating rubber reinforced lined RRL hose type- A 15 m long fire hose of 63 mm NB size, conforming to IS: 636-1988, rated for bursting pressure of 35.7 kg/cm2 complete with gunmetal male & female coupling conforming to IS: 903-1993, bound and rivetted to the hose pipe with copper rivets and 1.5 mm2 copper wire complete as specified and directed.
246	S & F 63 mm NB instantaneous inlet, 15 mm NB made threaded outlet nozzle branch short gunmetal pipe, conforming to IS 903-1993, suitable for inter connection to hose pipe coupling complete all as specified and directed.
247	S&F swinging type 36 m long First Aid Hose Reel, conforming to IS:884-1969, having 19 mm NB thermoplastic reinforced hose reel tubing, conforming to IS: 12585-1988, 25 mm NB ball valve, stop cock, terminating with gunmetal coupling & nozzle of 6 mm NB outlet with shut-off valve, conforming to IS: 8090- 1976 complete with MS socket for tap-off, red colour drum, brackets (including painting) for fixing on wall with anchor fastner, bolts, nuts, etc. complete all as specified and directed.
248	Supply, installation, testing and commissioning of 4-way fire brigade inlet connection, conforming to IS: 5290- 1993, with four 63 mm NB inbuilt gunmetal non-return valves, four 63 mm Ng instanteneous couplings arranged on 150 mm NB pipe manifold and connected to fire hydrant ring main and fire hydrant wet riser pipe all completeas specified and directed.
249	Supply, installation, testing and commissioning of 2-way fire brigade draw-off connection with two 63 mm NB inbuilt gunmetal non-return valves instanteneous coupling type arranged on 100 mm NB pipe manifold and connected to wet riser main as well as to fire water tank including CI butterfly valve, Cl non-return valve and MS cabinet with mounting supports, etc. all complete as specified and directed.
250	Supplying, installing testing and commissioning of MS air cushion tank, conforming to IS: 4736-1968 on top of each riser fabricated from 6 mm thick MS plate, 200 mm in diameter and 1.2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25 mm NB valve, pressure gauge with gun metal stop cock complete all as specified anddirected. Total carried over to BOQ Rs. 2161957.5 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part XI (Lightning Protection) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
251	M & L for Air termination, single pointed copper rod 12mm dia and 300mm long complete all as specified and as directed .
252	Supply and fixing aluminium strip 25mm x 3.15 mm complete with saddles and fixing screws as roof conductor complete all as specified.
253	Supply and fixing GI strip 32 mm x 6 mm complete and buried in ground as ground conductor complete all as specified .
254	Supply and fix Tubes light grade galvanised of size 40 mm with all fittings and fixed complete for suuporting the air temination rod and protection of GI strip complete all as directed
255	M & L for PCC (1:2:4) type C-1 (using 20 mm aggregate) as fixing of pipe on roof for air teriminators etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified and as directed.
256	M & L for Test point terminal block made of gun or phosphorus bronze size 75 x 75 x 25 mm, drilled and secrewed including 3 nos 8mm dia 25 mm long hex. Head screw complete all as directed complete. Total carried over to BOQ Rs. 119055.86 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part XII (Demolition of bldg Work) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
257	Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) complete all as specified and as directed.
258	Demolition of brick work in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.
259	Dismantling of asbestos cement (corrugated, semicorrugated etc) sheets in roof covering complete all as specified and as directed.
260	Dismantling structural steel work complete all as specified and as directed.
261	Demolition of reinforced cement concrete as in roof slab and beam complete all as specified and as directed.
262	Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (blow or above ground level) complete all as specified and as directed.
263	Dismantling unframed timber scantling 40 sqcm and over in sec in any position complete all as specified and as directed.
264	Scprating, scraping and cleaning of reinforcement complete all as specified and as directed.
265	Taking down chowkats of frames (without taking off shutter from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
266	Ditto but n.exc 1.5 sqm complete all as specified and as directed.
267	Dismantling of single layer manglore pattern or similar tiles or slate in roofing complete all as specified and as directed.
268	Taking up/down 15mm dia GI Pipe cleaned for reuse or transferingto store complete all as specified and as directed. Total carried over to BOQ Rs. 1876974.28 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part XIII (PA System) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
269	S&F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections for concealed complete all as specified and directed
270	S&F for PVC non-metallic rigid conduit ISI marked heavy duty white/Ivory colour and its accessories heavy duty ISI marked of size 25 mm dia for LAN, telephone and TV connections for concealed complete all as specified and directed
271	Supply and fix cast iron /pressed steel terminal boxes 60 mm seep, 100 mm x 100 mm for mounting, TV/ LAN /Telephone socket or PA system points etc, with 3 mm thick plastic laminated sheet cover complete all as specified and as directed. Total carried over to BOQ Rs. 97512.0 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer Schedule 'A' Part XIV (Internal Electrification) Item Description of Item Unit Rate per Unit (Rs.) Qty Amount (Rs.)
272	M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with mudular metal box min 1.2mm thick, duly covered with modular white colour plate with frame and other necessary accessories ncluding PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- Note:- a) One circuit should have maximum 8 pointsb) Circuit wire from MCB to switch board is deemed to be included with unit rate of item point wiring and the size of circit wire should be 2.5sqmm for L, N, Earth point.c) Core coding for phase wires are RYB maintain, for neutral black colour and for Earth Green (a) One light point controlled by one, one way switch 5 Amps Point 992.75 170.0 168767.5 (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator Point 992.75 33.0 32760.75 (c) One light point controlled by one, two way switch 5 Amps Point 1397.96 3.0 4193.88 (d) One bell point controlled by one, bell switch 5 Amps Point 992.75 3.0 2978.25 (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. Point 284.1 6.0 1704.6 (f) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad Point 1070.4 20.0 21408.0
273	Description all as per item No 1 here in before but using 2.5 sq mm single core copper conductor two nos cables of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. Note:- a) Circuit wire from MCB to switch board is deemed to be included with unit rate of item point wiring and the size of circit wire should be 4.00 sqmm for L, N, E
274	Description all as per item No 1 here in before but using 4 sq mm single core copper conductor two nos cables of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for industrial socket point including necessary running of 4 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. Note: connections to be drawn from 6 way DBs indipendently in each circuit points for Ac, Note:- a) Circuit wire from MCB to switch board is deemed to be included with unit rate of item point wiring and the size of circit wire should be 4.0 sqmm for L, N, E
275	M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size1.5 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 1.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 1.5 sqmm cable, one run of 1.5 sqmm cable and one run of PVC conduit will be measured as one unit
276	M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit
277	M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit.
278	M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.
279	M & L for Sub main wiring with approved colour coding as per IS with Four single core PVC insulated FRLSH cable with stranded copper conductor of size10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 10.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of 10 sqmm cable, one run of 10 sqmm cable and one/two run of PVC conduit will be measured as one unit.
280	S&F ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete.
281	S & F modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.
282	S&F modular switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.
283	S & F modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.
284	S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
285	S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
286	S&F Bell push modular 6 Amps single module complete all as specified.
287	S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed
288	S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door including blanking plate for dummy E space with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
289	S & F for sheet metal enclosure MCB DB SPN 8 way with rated bus bar 240 volts double door including blanking plate for dummy space with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
290	S&F for MCB DP rated capacity 32 Amps, (nearest standard size) 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
291	S&F for MCB DP rated capacity 10 Amps, (nearest standard size) 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
292	Supply and fixing ceiling fans complete with blades, down rods, electronic remote controlled with battery and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed mm .
293	S&F energy efficient metallic exhaust fan having blade sweep 450 mm, operating voltage 220-240 V and frequency 50 Hz, including electrical E connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed complete with louver with bolts nuts and washers, bolt, embedded in the wall and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.
294	S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 V, 50 Hz, 1200 RPM, copper winding fan single phase E 250 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.
295	S & F for wall mounted LED tube light fitting 1x 10 watts batten for surface mounted, anodized extruded aluminium housing, high E transmissitivity diffuser, high lumen ouput box type fitting, luminous efficiency not less than 120 lumen/watt, CRI > 80%, THD < 30%, driver Efficiency > 85%, PF > 0.9. Correlated Color Temperature 6500K (cool daylight) 170 Volts to 230 volts and LED Chip, Diver and Housing should of same make with warranty option of 2 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor and flexible conduit of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.
296	S & F for wall mounted LED tube light fitting 1x 20 watts batten for surface mounted, anodized extruded aluminium housing, high E transmissitivity diffuser, high lumen ouput box type fitting, luminous efficiency not less than 120 lumen/watt, CRI > 80%, THD < 30%, driver Efficiency > 85%, PF > 0.95. Correlated Color Temperature 6500K (cool daylight) 170 Volts to 230 volts and LED Chip, Diver and Housing should of same make with warranty option of 2 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor and flexible conduit of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.
297	S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts(or nearest standard size), luminous efficacy not less than 110 lumen/watt, LED Chip, Diver and Housing should of same make with pre wired and necessary mounting arrangements and medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed Total carried over to BOQ Rs. 2022387.32 Signature of Contactor DY Dir(Contracts) Date: For Accepting Officer SCHEDULE OF CREDIT Name of Work: PROVN OF 300 SEATS AUDITORIUM AT DANAPUR CANTT Sl No Decriptipin of work Unit Qty Rate Amount
298	Old unserviceable point wiring any size
299	Old unserviceable swithes, ceilling rose,call bell switch etc
300	Old unserviceable call bell
301	Old unserviceable T/L fittings 20 watt / 10 watt
302	Old unserviceable Swiitch socket any type and size.
303	Old unserviceable DB TPN 4 way
304	Old unserviceable DB SPN 8 way
305	Old unserviceable DB SPN 6 way / 4 way
306	Old unserviceable MCB TPN any capacity
307	Old unserviceable MCB SPN any capacity
308	Old unserviceable MCB SP any capacity
309	Old unserviceable submain wiring any size and capacity
310	Old unserviceable street light pole any size and capacity
311	Old unserviceable street light any size and capacity
312	Old unserviceable FPB any size and capacity
313	Old unserviceable XLPE cable 95 sqmm size
314	Old unserviceable XLPE cable 35 sqmm size
315	Old unserviceable XLPE cable 16 sqmm size
316	Old unserviceable XLPE cable 10 sqmm size
317	Old unserviceable GI pipe upto 80 mm dia.
318	Old unserviceable GI pipe upto 50 mm dia.
319	Old unserviceable GI pipe upto 25 mm dia.
320	Old unserviceable GI pipe upto 20/15 mm dia.
321	Old unserviceable Sluice valve 80 mm dia
322	Old unserviceable Gate valve 50 mm dia
323	Old unserviceable Gate valve 25 mm dia
324	Old unserviceable Gate valve 20/15 mm dia
325	Brick bats
326	AC sheet
327	Structural steel
328	scrap reinforced steel
329	Window
330	Manglore tiles
331	Wooden Scantling
332	GI Pipe 15 mm Total : 1297951.0 Notes :-1. The quantities shown in column (4) are approximate and are inserdted as guidence only. The actual quantities obtained from dismantling/demolition/taking down under schedule shall be considered for credit. All worn out/unserviceable materials/items which will be obtained from different items of BOQ/ Schedules during execution (repair/ replacement work), shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB. 2. The rates given under Column (5) are firm and no variation in the rate will be allowed. The credit worthiness of the materials for which the credit is to be offered by the contractor, shall be deemed to have been ascertained by him before quoting his tender, No claim on this account shall be entertained. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. 3. The total credit amount may vary as per actual execution of items/ work involved in this credit schedule. The measurements of dismantled materials shall be the gross quantity obtained/ demolished/ dismantled during execution of work. 4. These materials shall not be reused /re-incorporated in the work except where specified. 5. No separate payment for removal of the old material including disposal of debris shall be made & the same shall be deemed accounted for in the credit. (Signature of Contractor) Dy Dir (Contracts) For Accepting Officer

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Bihar Tenders

Construction Tenders

Building Construction Tenders

Auditorium Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Provision Of 300 Seats Auditorium At Danapur Cantt, Patna-Bihar

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Provision Of 300 Seats Auditorium At Danapur Cantt, Patna-Bihar

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us