|
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 2 | Short Point :- |
| 3 | Medium Point :- |
| 4 | Long Point :- |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 6 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 8 | 1 X 1.5 sq mm |
| 9 | 1 X 2.5 sq mm |
| 10 | 2 X 1.5 sq mm |
| 11 | 2 X 2.5 sq mm |
| 12 | 2 X 4 sq mm |
| 13 | 2 X 6 sq mm |
| 14 | 4 X 4 sq mm |
| 15 | 4 X 6 sq mm |
| 16 | Supplying and fixing of the following PVC casing capping with all accessories etc. as required:- |
| 17 | 20mm x 12mm |
| 18 | 25mm x 12mm |
| 19 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required:- |
| 20 | 19/20 mm dia |
| 21 | 25 mm dia |
| 22 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required:- |
| 23 | 2 X 1.5 sq mm |
| 24 | 2 X 2.5 sq mm |
| 25 | 4 X 6 sq mm |
| 26 | Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit including connection etc. as required:- |
| 27 | 2 X 1.5 sq mm |
| 28 | 2 X 2.5 sq mm |
| 29 | 4 X 6 sq mm |
| 30 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required:- |
| 31 | Pandent holder |
| 32 | Angle/batten holder |
| 33 | Ceiling rose |
| 34 | Ding dong call bell |
| 35 | Remote controlled call bell |
| 36 | 2.5 mfd fan capacitor |
| 37 | 5 amps power top:- |
| 38 | 15 amps power top:- |
| 39 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required:- |
| 40 | 1-2 module plastic switch board:- |
| 41 | 3 module plastic switch board:- |
| 42 | 4 module plastic switch board:- |
| 43 | 6 module plastic switch board:- |
| 44 | 8 module plastic switch board:- |
| 45 | 12 module plastic switch board:- |
| 46 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required:- |
| 47 | 1-2 module :- |
| 48 | 3 module :- |
| 49 | 4 module :- |
| 50 | 6 module :- |
| 51 | 8 module :- |
| 52 | 12 module :- |
| 53 | Supplying and fixing of the following modular accessories including necessary connection etc. as required:-(Anchor ROMA URBAN / MK BLENZ PLUS) |
| 54 | 6/10 amps one way SP switch (1M) :- |
| 55 | 6/10 amps two way SP switch (1M) :- |
| 56 | 16/20 amps one way SP switch (1M) :- |
| 57 | Bell push SP (1M) :- |
| 58 | 32 amps one way DP switch (2M):- |
| 59 | 3 pin 6/10 amps socket outlet (2M):- |
| 60 | 3/6 pin 16/20 amps socket outlet (2M):- |
| 61 | 5 step fan regulator (2M):- |
| 62 | RJ11 telephone socket outlet (1M):- |
| 63 | RJ45 LAN socket outlet (1M):- |
| 64 | TV socket outlet (1M):- |
| 65 | Blank plate (1M):- |
| 66 | Louvers/opaque type LED foot lamp (4M):- |
| 67 | 20/25 amps single phase motor starter switch (2M):- |
| 68 | Supplying & fixing of 900 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) :- |
| 69 | Supply, installation, testing and commissioning of 1200mm sweep decorative ceiling fan of model No. AURA of crompton make complete with 300mm down rod, canopies, shackle kit, 03 nos. blades including wiring the down rod with 3x1.5 sqmm PVC insulated copper conductor cable (FR) etc. as required:- |
| 70 | Supplying of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades (Without regulator) (ISI marked, BEE 1 star/minimum service value 4.0m3/min/W) : - |
| 71 | Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable(FR) etc as required:- |
| 72 | Supplying and fixing of 500 mm metallic body pedestal fan as per cat no-BRIZSTAR FARRATA 20\\" of Crompton ( similar specification of Havells / USHA) |
| 73 | Supplying & installation of 400 mm sweep AC padestal fan with metal blade including connection etc as required:- |
| 74 | Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:- |
| 75 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:- |
| 76 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:- |
| 77 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 78 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:- |
| 79 | Dismantling the existing ceiling fan and making winding by (34/35/36 S.W.G) Copper wire, varnish, oiling, greasing and re-fixing the same including wiring the down rod of standard length ( up to 30 cm ) etc. as required:- |
| 80 | Supplying and fixing of following room heater complete with 15 amps top including necessary connection etc as required:- |
| 81 | 1000/1500/2000/2500 watt blower type room heater:- |
| 82 | Supplying and fixing of following vertical storage water heater 5 star catagory complete with 15 amps top, connection pipes including necessary connection etc as required. |
| 83 | 25 litre storage capacity:- |
| 84 | Supplying and fixing of following accessories for water heater including connection etc as required as per direction of site Engineer. |
| 85 | Heating element / Coil |
| 86 | Thermostat/ Thermal cutout. |
| 87 | Supplying and fixing of 6 watt LED filament lamp with base: E14 complete with other necessary accessories including connection etc. as required (Cat No: ADE-WHT-C35FLAMP of Jaquar/ similar to Philips / Wipro):- |
| 88 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 89 | Surface mounted integrated 10 watt LED batten with polycarbonate diffuser:- |
| 90 | Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:- |
| 91 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):- |
| 92 | Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:- |
| 93 | Surface mounted round/Square shaped 6/7 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 94 | Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 95 | Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 96 | Supplying and fixing of surface mounted round / square 15 watt LED downlight of tri-colour (CW/NW/WW) complete with all necessary accessories including connection etc. as required. (Cat No: HDL-WHT-LSTA3IN1R15X, Jaquar make :- |
| 97 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 98 | 90 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 99 | 120 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 100 | 6 watt/10 watt LED Bulkhead light with high quality polycarbonate diffuser (IP 65):- |
| 101 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 102 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 103 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 104 | 12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 105 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required:- |
| 106 | 2 way SPN MCB DB (single door):- |
| 107 | 4 way SPN MCB DB (double door):- |
| 108 | (2+4) / 6 way SPN MCB DB (double door):- |
| 109 | 6 way horizontal TPN MCB DB (Double door):- |
| 110 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- |
| 111 | 6 to 32 amps SP MCB:- |
| 112 | 6 to 32 amps DP MCB:- |
| 113 | 40/50/63 amps TP MCB:- |
| 114 | 40/50/63 amps TPN MCB:- |
| 115 | 40/50/63 amps FP MCB:- |
| 116 | Supplying and laying of following sizes XLPE insulated PVC sheathed copper conductor Un-armoured cable including necessary connection etc as required. |
| 117 | 3 core 1.5 Sq mm |
| 118 | 3 core 2.5 Sq mm |
| 119 | 4 core 4 Sq mm |
| 120 | Supplying & fixing of 12mm thick marine plywood conforming to IS:710 with necessary painting etc as required:- |
| 121 | Drawing of armoured/un-armoured cable with proper saddling etc as required:- |
| 122 | Supplying & installation of Digital timer Switch including necessary connection etc as required:- |
| 123 | Supplying & installation of Astronomical timer Switch including necessary connection etc as required:- |
| 124 | Supplying & installation of following power contactors including necessary connection etc as required:- |
| 125 | 3 pole 18 amps (AC3) power contactors with 1NO+1NC Aux. Contact. |
| 126 | Cleaning of existing ceiling fan/luminaries. |
| 127 | HIring of skilled wireman / electrician for providing of round the clock duty in 02 (two) shifts for upkeeping & maintenance of the existing electrical installation i.e, lights fixtures, fans, outdoor lights, feeder pillars, main electrical panel, distribution panels including restoration / replacement of defective components along with addition / alteration of I.E installation etc. as per directions of the Engineer-In-Charge:- |
| 128 | 01 (one) Electrician/skilled wireman in 1(one) shift in all working days and holidays from 9.00 AM to 9.00 PM i.e RS 569/- per day:- |
| 129 | 01 (one) semi-skilled wireman [Morning shift from 6:00 AM to 10:00 AM = 4 Hours & Evening shift from 5:30 PM to 9:30 PM = 4 Hours] Please Enable Macros to View BoQ information |
