|
| 1 | Civil Works |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas( exceeding 30 cm in depth, 1.5m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth leasd upto 50m and for all lift,as directed by Engineer-in-charge. All kind of soil. |
| 3 | Filling available excvated earth (excluding rock) in trenchs ,path,sides of foundations etc |
| 4 | Supplying and filling in plinth with sand under floors, including watering ramming, consolidating and dressing complete. |
| 5 | Excavating, suppling, stacking and filling of local erth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in fondation, trenches, plinth, sides of foundation etc. complete for all lift. |
| 6 | providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4(1 Cement: 2Coarsesand(Zone-III) derived fron natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position cement corcrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement:4 Coarse sand (Zone-III) derived from natural sources : 8 graded stone aggrigate 40 mm normal soze derived from natural sources ) |
| 8 | Making plinth protection 50mm thick of cement concrete 1:3:6(1Cement:3 Coarse sand (Zone-III) deriver from natural sources:6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation , levelling & dressing & finishing the top smooth. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering finishing and reinforcement. All work up to plinth level 1:1:5:3(1 Cement : 1.5 Coarse sand (Zone-III) serived from natural source :3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:.5:3(1cement:1:5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (1cement:1:5 coarse sand (zone-III) for natural sources) |
| 11 | Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15* landings, balconies, shelves, chajjas lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering shuttering, finishing and reinforcement with 1:1.5:3(1cement:1:5 coarse sand (zone-III) DERIVED FROM NATURAL SOURCES : 3 Graded Stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Centering and shuttering including strutting propping etc. and removal of form for foundations, footings, basses of columns, footings, bases of columns, etc. for mass conctete. |
| 13 | Centering and shuttering including strutting propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | Centering and shuttering including strutting propping etc. and removal of form for Columns, Pillars, Piers, Abutments, posts and Struts |
| 15 | steel renforcement for R.C.C work including straightening, cutting, bending,placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe- 500D or more |
| 16 | steel renforcement for R.C.C work including straightening, cutting,bending,placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe- 500D or more |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1;6(1 Cement : 6 Coarse sand) |
| 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement :6 coarse sand) |
| 19 | Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstrictire abpve plinth level up to floor v level in all shapes and sizes in : Cement mortar 1:4(1 Cement :4 coare sand ) |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622(thickness to be specified by the manufactures ) of approved make , in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer in- Charge. |
| 21 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (part-1non- decorative type core of block board construction with frame of 1st class hardwood and well matched commerciel 3 play veneering with vertical grains or cross bands and face veneers on both faces of shutters 35mm thick including isi marked stainless steel butt hinges with necessary screws. |
| 22 | Providing and fixing wire gauge shutters using galvanized m.s wire gaguge of average width of aperture 14 0.63 mm for door windows and clerstory windows with hinges and necessary screws: 35 mm thick shutters with ISI marked M.S Pressed butt hinges bright finished of requried size klin seasoned selected class of sheesham wood |
| 23 | Providing and fixing M.S. grills of requried patten in frames of windows etc. including primer all complete fixed to steel primer all complete. Fixed to steel windows by welding. |
| 24 | 40x5mm flat iron hold fast 400mm long including fixing to fram with 10mm diameter bolts ,nuts and wooden plugs and embedding in cement concrete block 300x300x150mm 1:3:6 mix (1 cemment :3 coarse sand :6 graded stone aggregate 20mm nomminal size) |
| 25 | providing and fixing t- iron frames for door , windows and ventilators of mild steel Tee-sections, Joinsts mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10cm of c.c. 1;3;6 (1 Cement 3 Coarse sand: 6 graded storne aggregate 20mm nominal size). |
| 26 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thikness, including hinges, jamb, lock jamb, bead and if required angle threshhold of mild steel angal of section 50x25 mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanincal means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in charge:, |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, oisting, fixing in position and applying a priming coat of ap[roved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 28 | Providing and laying Ceramic glazed floor tiles of size300x300mm (thikness to be specified by the manufacture) of 1st quality conforming to IS 15622 of approved make in colorus such as white , lvory, grey, Fume red Brown laid on 20mm thick cement mortar 1:4. |
| 29 | Providing and laying vitrified floor tiles in different size ( thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622, of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc, complete. size of tile 600x600 mm |
| 30 | Providing and laying vitrified floor tiles in different size ( thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622, of approved make in all colours and shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement:3 coarse send0, jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement and matching pigments etc, complete. |
| 31 | providing and laying polished granit stone flooring in requrired design and patterns in required design and pattern in linear as wall as curviliner portion of the building all complete as per the architecturaldrawing with 18 mm thick stone base of cement slurry admixed with cement slurry admixed with pigment oof matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer in charge. |
| 32 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pinth of corrugation as approved by Engineer-in- Charge) of total coated thickness 0.50mm( base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm ) with zinc coating 120 grams per sqm as per IS:227, in 240 Mpa steel grade, 5-7 microns epoxp primer on both side of the sheet and polyster top coat 15-18 microns. Sheet should have protective guarde film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer -in -charge. |
| 33 | Providing and fixing precoated galvaninsed steel sheet roofing accessories of total coated thickness 0.50mm(base metal of minimum 0.45mm thickness with total coating thikness of 0.50mm) with zinc coating 120 grams per sqm as per IS;277, in 240 mpa steel grade, 5-7 micribs epoxy primer on both side of the sheet and polyster top coat 15-18 microns using seld drilling /self tapping screws cmplete:Ridges planin(500-600 mm). |
| 34 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made up of special section power pressed from MS Sheet and galvanised with zinc coating with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level supended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including bothe sides) comprising of main - T runners of size 24 x 38 mm of length 3000 mm, cross- T of size 24 x 32 mm of length 1200 mm and secondary intermediate cross T of size 24 x 32 mm of length 600 mm to formgrid module of size 600 x 600 mm, Suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) |
| 35 | 12mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) |
| 36 | 15 mm cement plasteron the rough side of single or haif brick wall of mix: 1:4 (1 cement: 4 fine sand) inner plaster |
| 37 | 12mm Cement plaster finished with a floating coat of neat cement of mix 1;4 (1 Cement; 4 fine sand) |
| 38 | Net Cement Punning. |
| 39 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 40 | Finishing walls with Acrylic Smooth extender paint of required shade: New work(Two or more coat applied @1.67 ltrs/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm. |
| 41 | Applying priming coat with ready mixed pink or Grey primer of approved brand and munufacture on wood work ( hard and soft wood). |
| 42 | Providing with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new works. |
| 43 | Providing and applying white cement based putty of avarge thiknes 1mm of apporved brand and manufacture, over the plastered wall surface to prepar the surface evan and smooth complete. |
| 44 | Prividing and fixing Chlorinated pllyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting s this including jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge Extemal work 20mm nominal dia pipes. |
| 45 | Providingn and fixing Chlorinated pllyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fitting s this including jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge Extemal work 32mm nominal dia pipes. |
| 46 | providing and fixing gun metal gate valve of approved quality (Screwed end) 25 mm norminal bore, Vertical |
| 47 | providing and fixing aluminium tower bolts isi marked ,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or sheade ,with necessary screws etc .comlete, 250 X 10 mm |
| 48 | 150 x 10 mm |
| 49 | providing and fixing aluminium work for door, windows,ventilators and partitions with extuded bulit up standerd tubular section /appropriate Z section and other section of approved make conforming to IS 733 and IS :733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junction ie. at top bottom and side with requried EPDM rubber/neoprene gasket etc. Aluminium snap beadingfor glazing paneling, CP brass/stainless steel screws all completed as per architectural drawing and the direction of Engineer -in charge .(Glazing, Paneling and dash fasteners to be paid for separately) for fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade Ac 15) |
| 50 | Providing and fixing glazing in aluminim door, window, vntilator shutters and partitions etc with EPDM rubber/neoprene gasket etc. complete as per the arcitectureal drawings and the directions of engineer in_charge(cost of aluminium snap beading shall be paid in basic items) with float glass panes of 4.0 mm thickness (weight not less than 10 Kg/Sqm) |
| 51 | Construction brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4. |
| 52 | Making soak pit 2.5m diameter 3.0 meter deep with 45x45 cm dry brick honey cmb shaft with bricks and S.w. drain pipe 100 mm diameter , 1.8 m long complete as per standard design. |
| 53 | Providing and fixing white virteous china pedestal type water closet (European type W.C. Pan) with seat and lid , 10 ltr low level white PVC flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C.Pan with ISI marked white solid plastic seat and lid |
| 54 | Providing and fixing wash basin with CI brackets, 15mm CP brasspillar taps, 32mm CP brass waste of standard patten, including painting of fittings and brackets cutting and making good the walls whereever required: White vitreous chin Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass Pillar tap |
| 55 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as IS 13983 with C.I brackets and stainless steel plug 40 mm , including painting of fittings and brackets, cutting and making good the walls whereever required: |
| 56 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete. 32 mm dia |
| 57 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 58 | Providing and fixing mirror of superior glass and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing: |
| 59 | Providing and fixing 600x 120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with CP brass brackets and fuard rail complete fixed with 40mm long screws, rawlplugs etc. complete. |
| 60 | Providing and fixing toilet paper holder : CP brass |
| 61 | Providing and fixing PTMT towel rail complete with brackets fixed toweooden cleats with CP brass screws with concealed fitting sarrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm weighing not less than,190 grams |
| 62 | Providing and fixing uplasticised PVC connection pipe with brass unions: 15mm nominal bore |
| 63 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS:8931:15mm nominal bore |
| 64 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810gms, 15 mm nominal bore |
| 65 | Providing and fixing C.P. Brass stop cock (Concealed) of standard design and of approved make conforming of IS:8931. |
| 66 | Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 |
| 67 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 250 x 16 mm |
| 68 | Providing and fixing aluminium handles , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour r shade, with 125 mm |
| 69 | Providing and fixing aluminium hanging floor door stopper ISI marking ,anodised (anodic coating not less than grade AC 10 as per IS1886)trasnsparent or dyed to required colour and shade, with necessary serews etc. complete. |
| 70 | Providing and laying factory made chamfered edge cement concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parking etc required strength, thickness & size / shape,made by table vibratory method using PU Moul, laid in required colour & pattern over 50 mm thick compacted bed of sand,compacting and proper embedding / laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-charge,80 mm thick C.C.Paver block of M-30 grade with approved colour design and pattern |
| 71 | Prividing and fixing soil : waste and vent pipe 100mm PVC pipe. |
| 72 | Providing and fixing plain bend of required degree :75mm PVC Pipe. |
| 73 | Providing and fixing bend of requireed degree with access door, insertion rubber washer 3mm thick , bolt and nuts complete : 100 mm PVC pipe. |
| 74 | Electrical Works |
| 75 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheel, suitable size MS box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as requied Group-A. |
| 76 | Wiring for light/power plug with 2x4 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 77 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable ins surface/ recessed steel is required. 2 x 1.5 sqmm + 1x1.5 sqmm earth wire |
| 78 | Supplying and fixing following mdular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. As required . 5/6 A Switch. |
| 79 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required,15/16 A Switch |
| 80 | Supplying and fixing following modular switch /socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A Socket outlet. |
| 81 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 82 | Supplying and fixing following way, single pole and neutral , sheet steel MCB distribution board, 240V on surface/ recess, complete with tinned copper bus bar, interconnections, power painted including earthing etc as required (But without MCB/RCCB/Isolator) 8way, Double door. |
| 83 | Supplying and fixing 5A to 32 A rating. 240/415V, 10KA @C@ curve miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections , testing and commissioning etc. as required, single pole. |
| 84 | Supplying and fixing following rating double pole, 240V isolator in the existing MOB DB complete with connections , testing and commissioning etc. as required 40A. |
| 85 | Earthing with G.I earth pipe 4.5 meter long 40mm dia inclusing accessories and provideing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal /coke and salt as required. |
| 86 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I thimble excavation and re- fitting as required. |
| 87 | Supply, Installation, Testing and Commissioning of 1200mm sweep, Bee 5 star rated, Ceiling Fan with Brush Less Direct Current (BLOC) Motor, class of insulation ;B 3 nos caropies , shackle kit, safety rope, copper winding , power Factor not less than 0.9 Service Value (CM/M/W) minium 6.00 Air delivery minimum 210 Cum/Min,350 RPM (tolerance as per IS 375-2019) THD less than 10% remote or electrinic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers temperature rise=75 degreeC(max) insulation resistance more tha 2 mega ohm, suitable for 230v, 50 Hz single phase AC Supply, earthing etc complete as required. |
| 88 | Providing and fixing metal Box (Size- 150x75x60mm) |
| 89 | Providing and fixing of 15 watt LED bulb with necessary fitting ( Brand : Havells , Suriya, Phillips) by Engineer in Charge). |
| 90 | Providing and fixing fluroscent lamp -II watt of approved brand |
| 91 | Providing and fixing of exhaust fan with necessary fitting (Brad: Havells, Suriya, pPhilips) By Engineer in charge. Please Enable Macros to View BoQ information |
