|
| 1 | Supply of 3 Way, 11KV, 630A, 21 kA 3sec, SF6 Outdoor RMU - 2 Motorised Load brak switch with manual earth switch in SF6 and 1 vaccum Circuit braker. RMU shall be scada compatible and as per GED specifications |
| 2 | Erection of 3 way RMU with 2 LBS & 1 VCB |
| 3 | Supply of 200 KVA Distribution Transformer Energy efficient Level II |
| 4 | Erection of 200 KVA Transformer |
| 5 | Supply & Erection of outdoor LV Main switch board for 200 KVA DTC |
| 6 | Supply & Erection of DTC Metering Unit |
| 7 | 4 G Modem |
| 8 | Supply & Erection of FRP Fencing for DT (4M x 3M x 2 M) |
| 9 | Supply of XLPE armoured cable 3.5 x 240 sq. mm |
| 10 | Laying of XLPE armoured cable 3.5 x 240 sq. mm |
| 11 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 240 Sq. mm. |
| 12 | Supply & Erection of Danger Boards |
| 13 | Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. 3 core x 300 sq. mm |
| 14 | 3 core x 95 sq. mm |
| 15 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In Rocky strata |
| 16 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In Rocky strata |
| 17 | Providing and erecting Heat shrinkable straight through joint kit for 11 KV (E) XLPE HT cable 3x240 to 400 sq. mm. with necessary material as per specification no. CB-JT/HT |
| 18 | Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. a)11 KV, 3 Core x 240 - 300sq.mm |
| 19 | b) 11 KV, 3 Core x 50 - 95 sq.mm |
| 20 | Supplying, erecting, testing and commissioning of diesel generating set with alternator of 82.5 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 14.0 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 145 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG |
| 21 | Supply, installation, testing and commissioning of 3 phase CT operated meter box consisting of :1) Incomer:MCCB, TP, 100A, 25KA thermal realease (0.8-1 setting) with rotory handle2) Neural Link: AL strip of 150A rating3) CTs:MRT Tested 100/5 A, 5VA, Class 0.5 - 3 Nos.4) Space provision for Bar 5A KWH smart meter as per GED specifications - To be supplied by GEDMeter Box shall be outdoor type with canopy to be fabricated using 14 G sheet steel having chemical surface treatment and finishing shall be of 2-coats of synthetic enamel, RAL - 7032.Refer SLD -ICS/PMC/EL-SLD/01 |
| 22 | Design, fabrication, supplying and testing of dust, damp and vermin proof free floor standing sheet steel enclosed non-drawout indoor-IP 54 ,compartmentalised LT Main Panel, fabricated out of suitable sized angle iron and flats, base channel and covered with 2.0mm thick CRCA sheet, bending , punching to be done using CNC machines, duly powder coated complete with earth bus, aluminium bus bar, feeder labelling.1) The feeder arrangement shall be as per SLD no: ICS/PMC/EL-SLD/02.2) Switchgear and panel components shall be as per approved makes list.3) Special instructionsa) Switchgear shall have rotary handle for operation.b) There should be view (transparent ) window for Outgoing MCB of the Sub incomer (MCCB) feeder.c) Connectors/ busbars to be provided for outgoing cable connections.d) Size of cable alley should be adequete for housing the outgoing cables.e) Panel shall have top entry for cables.f) Panel shall be supplied with base frame.g) All live parts should have safety shrouding.h) Motor operated change over switch (MOS) shall have built in or external control circuit to sense Over Voltage,Under Voltage,Single phasing,loss of neutral, phase sequence etc. and indication showing status of load on MAINS/DG on the display unit of MOS.MOS shall have provision to set the parameters using external hand held unit.MOS shall have output control terminals for remote indication and remote start/ stop of DG during unhealthy power condition. |
| 23 | Design, fabrication, supplying and testing of dust, damp and vermin proof free floor standing sheet steel enclosed non-drawout indoor-IP 54 ,compartmentalised LT Main Panel, fabricated out of suitable sized angle iron and flats, base channel and covered with 2.0mm thick CRCA sheet, bending , punching to be done using CNC machines, duly powder coated complete with earth bus, aluminium bus bar, feeder labelling.1) The feeder arrangement shall be as per SLD no: ICS/PMC/EL-SLD/02.2) Switchgear and panel components shall be as per approved makes list.3) Special instructionsa) Switchgear shall have rotary handle for operation.b) There should be view (transparent ) window for Outgoing MCB of the Sub incomer (MCCB) feeder.c) Connectors/ busbars to be provided for outgoing cable connections.d) Size of cable alley should be adequete for housing the outgoing cables.e) Panel shall have top entry for cables.f) Panel shall be supplied with base frame.g) All live parts should have safety shrouding.h) Motor operated change over switch (MOS) shall have built in or external control circuit to sense Over Voltage,Under Voltage,Single phasing,loss of neutral, phase sequence etc. and indication showing status of load on MAINS/DG on the display unit of MOS.MOS shall have provision to set the parameters using external hand held unit.MOS shall have output control terminals for remote indication and remote start/ stop of DG during unhealthy power condition. |
| 24 | Design, fabrication, supplying and testing of dust, damp and vermin proof free floor standing sheet steel enclosed non-drawout indoor-IP 54 ,compartmentalised LT Main Panel, fabricated out of suitable sized angle iron and flats, base channel and covered with 2.0mm thick CRCA sheet, bending , punching to be done using CNC machines, duly powder coated complete with earth bus, aluminium bus bar, feeder labelling.1) The feeder arrangement shall be as per SLD no: ICS/PMC/EL-SLD/05.2) Switchgear and panel components shall be as per approved makes list.3) Special instructionsa) Switchgear shall have rotary handle for operation.b) There should be view (transparent ) window for Outgoing MCB of the Sub incomer (MCCB) feeder.c) Connectors/ busbars to be provided for outgoing cable connections.d) Size of cable alley should be adequete for housing the outgoing cables.e) Panel shall have top entry for cables.f) Panel shall be supplied with base frame.g) All live parts should have safety shrouding.h) Motor operated change over switch (MOS) shall have built in or external control circuit to sense Over Voltage,Under Voltage,Single phasing,loss of neutral, phase sequence etc. and indication showing status of load on MAINS/DG on the display unit of MOS.MOS shall have provision to set the parameters using external hand held unit.MOS shall have output control terminals for remote indication and remote start/ stop of DG during unhealthy power condition. Supply,Installation,Testing & Commissioning all complete |
| 25 | Supply of 3 1/2 core armoured PVC insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.a) 3 1/2 Core 35 sq.mm |
| 26 | b) 3 1/2 Core 50 sq.mm |
| 27 | c) 3 1/2 Core 120 sq.mm |
| 28 | Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.a) 3 Core 2.5 sq.mm |
| 29 | b) 3 Core 4 sq.mm |
| 30 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size, 3 Core 1.5 sq.mm |
| 31 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm |
| 32 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (b) In rocky Strata |
| 33 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. '(b) In rocky strata |
| 34 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required |
| 35 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required |
| 36 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. '(1) 3 x 1.5/2.5 Sq. mm |
| 37 | (2) 3 x 4 Sq. mm. |
| 38 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. '(3) 4 x 6 Sq. mm. |
| 39 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 3 1/2 x 35 Sq.mm |
| 40 | (3) 3 1/2 x 50 Sq. mm. |
| 41 | (6) 3 1/2 x 120 Sq. mm. |
| 42 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required (1) 3 x 1.5/2.5 Sq. mm. |
| 43 | Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150mm width x 50mm depth |
| 44 | 200mm width x 50mm depth |
| 45 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 46 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted ncluding earthing etc. as required ( but without MCB/RCCB/Isolator) 8 way double door Cat A |
| 47 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (b) 4 way (8+12), double door, Horizontal type Cat A |
| 48 | (c) 6 way (8+18), double door, Horizontal type Cat A |
| 49 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (a) 6 way with 100A MCCB as Incomer, double door, Cat A |
| 50 | Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) (a) 4 way with 100A MCCB as Incomer, double door, Cat A |
| 51 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. A) SP, Cat A |
| 52 | b) TP, Cat A |
| 53 | Supplying & erecting original 1.25 mm CRCA sheet metalenclosures with 20A. 2 pin plug & earth socket and 20A. 3 pinplug top with 20A/30A single pole MCB complete erected onangle iron/ GI frame. |
| 54 | Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame omplete. |
| 55 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. '(a) 20 mm |
| 56 | (b) 25 mm |
| 57 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 58 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 59 | (i) 4 x 4 sq.mm + 2 x 4 sq.mm earthwire (25mm Conduit) |
| 60 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (f) Group C -- with Cat B Modular Accessories |
| 61 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 62 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with modular switch, modular plates, suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. '(c) Group C -- with Cat C Modular Accessories |
| 63 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing capping and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. |
| 64 | Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/ wooden block including connections etc as required. |
| 65 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (Cat B) |
| 66 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. '(b) Cat B |
| 67 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. '(b) Cat B |
| 68 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required |
| 69 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT B |
| 70 | Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wall or in the existing surface/recesed steel/PVC conduit having following pair(s), complete as required. 2 Pair |
| 71 | Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having following pair(s), complete as required 20 Pair |
| 72 | Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs including krone make modules, crimping and terminations, etc complete as required. (b) 20 Pair |
| 73 | Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required '(a) Cat 6 |
| 74 | Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 500mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min.efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90,operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG-ODF/BL. |
| 75 | Supplying and erecting LED square / circular 9 to 12W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. |
| 76 | Supplying & erecting inverter LED batten 20W tube light fitting withpolycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mA Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 Hrs with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20 % having useful life of minimum 25000 Hrs with over heat protection with minimum 2 years as per specification No. FG-IDF/LED. |
| 77 | Supplying & erecting UV Fly killer/ bug catcher Light Fitting having 2 X 20W UV Tube Lights to cover min. area of 500 sq.ft with powdered coated M.S. / steel body suitable to work on 230V, AC supply having top mounting arrangement with SS chain complete and 3 core flexible wire upto 1 mtr with minimum 1 year warranty as per specification No. FG-IDF/LED. |
| 78 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 79 | Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120 270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED |
| 80 | Gate Light Supplying and erecting Gate / garden light fitting with 300mm dia. Glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT. |
| 81 | Providing & erecting 5 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL. |
| 82 | Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT |
| 83 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FGODF/SL. |
| 84 | Outdoor compound wall façade light, 6W - 450 lumens , 3000k Deco Wall light Ktype - orient make or equivalent |
| 85 | Weatherproof PVC Junction box with 3 way connector surface/concealed of size 4\\"x4\\" |
| 86 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A |
| 87 | Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge including painting etc as required |
| 88 | Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexiblecable 1 sq. mm copper PVC wire. |
| 89 | Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. (a) Cat A |
| 90 | Supplying, installing, testing & commissioning cassette type room Air conditioning unit 2.8TR to 3.3TR capacity with refrigerant R32/R410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega spilt) mounting type complete with temperature display on indoor unit, dust filter, noise level maximum 50dBA at position as per specification no. AP-AC/ WAC |
| 91 | Supplying, installing, testing & commissioning cassette type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room Air conditioning unit 1.8TR to 2.1TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32/R410A having copper condensor,dust filter, self diagnosis feature, stabilizer free operation, noise level maximum 50dBA at position as per specification no. AP-AC/ WAC |
| 92 | Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring (300mm dia minimum)/excavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value. Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode. (a) 3 metres length electrode |
| 93 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). (b) In rocky strata |
| 94 | Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt). |
| 95 | Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 96 | Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required Please Enable Macros to View BoQ information |
