|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8144/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: BLDG RELATED MAINT WORKS OF B/R NATURE OF PERMT/TEMP BLDGS IN CERTAIN UNITS/REPAIRS TO AREA DRAINS, SEWAGE LINES, MANHOLES, COVER SLABS, HUME PIPE CULVERTS INCL CLEANING OF CHOCKED SEWAGE LINES AND MANHOLES, COMPOUND WALL, CHAIN LINK FENCE, WICKET GATES, PAINTING/PLASTERING TO BOUNDARY WALL, HARDSTANDING ETC AND OTHER CONNECTED MAINT WORKS OF MISC NATURE AT CERTAIN UNITS UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Demolition of cement concrete in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL including removing the debris outside MD land complete all as specified and as directed. |
| 3 | M&L for Cement concrete in sub base, 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed. |
| 4 | Demolition of brick work or stone masonry, built in cement mortar complete all as specified and as directed. |
| 5 | M&L for brick work with fly ash bricks built in CM 1:6 straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed. |
| 6 | Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering . |
| 7 | M&L for 6 mm thick Non-Asbestos cement fibre corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and as directed. |
| 8 | Fixing only 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and as directed. |
| 9 | S & F 6 mm thick Non- Asbestos cement fibre two pieces adjustable serrated ridge fixed with J or L hook or cranked bolt with washers. |
| 10 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc. complete all as specified and as directed. |
| 11 | S&F in repair rolled mild steel sections as in roof trusses, (framed), trussed purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats confirming to Fe-410-W (grade E-250 quality 'A') complete all as specified and as directed. |
| 12 | M&L for preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 13 | S&F for 110 mm PVC (SWR) pipes single socket length fixed as spouts on roof including cutting holes in brickwork/stone masonry/concrete surface and making good with rich cement mortar and sealed with bitumen complete all as specified and as directed. |
| 14 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. capacity of tank 500 ltrs complete all as specified and as directed. |
| 15 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. capacity of tank 1000 ltrs complete all as specified and as directed. |
| 16 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. capacity of tank 2000 ltrs complete all as specified and as directed. |
| 17 | S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top ) of 500 ltr capacity hoisted and fixed in position all as specified with dismantling of old unserviceable tank. |
| 18 | S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top )of 1000ltr capacity hoisted and fixed in position all as specified with dismantling of old unserviceable tank. |
| 19 | S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top )of 2000ltr capacity hoisted and fixed in position all as specified with dismantling of old unserviceable tank. |
| 20 | Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work. |
| 21 | M & L for 2nd class hard wood, clean sawn, in scantling timber fixed with nails complete all as specified and directed |
| 22 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets and grids and S&F for true horizontal level 600x600mm panels false ceiling system using hot dipped galvanized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimeter wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished angular edge including 8-9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination complete all as specified and as directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and as directed. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and as directed. |
| 25 | Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and as directed. |
| 26 | Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and as directed. |
| 27 | M&L for 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and as directed. |
| 28 | S & F in repairs 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets.'square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed |
| 29 | M&L for in repair 18mm thick plywood, grade 1 (with BWR resin) with one face veneered decorative fixed with brass screws and cups to timber frame work complete all as specified and as directed. |
| 30 | S & F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised, Width of flaps (when open) in 30 mm etc. complete all as specified and as directed. |
| 31 | S & F mild steel as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 |
| 32 | M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed. |
| 33 | S & F mild steel as in Window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified and as directed. |
| 34 | M&L for 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated. |
| 35 | S & F 35 mm thick IInd class hard wood factory made glazed and skeleton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified and as directed. |
| 36 | S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter of divided into square, with plain chamfered or rounded metered and rebital sash bar any number and framing moulded windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and as directed. |
| 37 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction. |
| 38 | S & F factory made solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and as directed. |
| 39 | S & F 100 MM Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21. |
| 40 | S & F 100 mm length of aluminium anodized barrel tower bolts of extruded section and fixed. |
| 41 | S & F Aluminium anodized, barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc. complete all as specified and as directed. |
| 42 | S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodized |
| 43 | S & F for Extruded aluminium alloy handles, fabricated type, anodized, Size of handle in 100 mm, etc. complete all as specified and as directed. |
| 44 | S & F for Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc. complete all as specified and as directed. |
| 45 | S & F for Aluminium wire type I, Gate and shutter, hooks and eyes 150 mm, etc. complete all as specified and as directed. |
| 46 | S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed. |
| 47 | S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. ( short type, fighter jet aeroplane shape type) |
| 48 | S & F MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and as directed. |
| 49 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.00 mm & fixed with stainless steel wire staples fixed. |
| 50 | M&L for preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 51 | S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed. |
| 52 | S & F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed. |
| 53 | Hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone concrete or bricks surrounds glazed with putty or fixed with beads. |
| 54 | S&F in repairs 140 mm size floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring |
| 55 | Taking down cement plaster on brick wall/stone wall, ceilings etc., racking out joints, hacking for key & scrubbing with water complete all as specified and as directed. |
| 56 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement. |
| 57 | M&L for 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement . |
| 58 | M&L for preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil bound distemper to walls, white or tinted complete all as specified and directed. |
| 59 | M&L for preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of Oil bound distemper on ceilings, white or tinted complete all as specified and directed. |
| 60 | M&L for preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of Oil bound distemper to walls, white or tinted complete all as specified and directed. |
| 61 | M&L for complete removal of existing treatment and applying 1.5mm thick white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared surfaces of internal walls complete all as specified and directed. |
| 62 | M&L for preparation of old decorated surfaces of walls plastered or unplastered by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement based paint comlpete all as specified and directed. |
| 63 | M&L for complete removal of existing treatment and applying two coats of cement based paint on prepared surfaces of walls complete all as specified and as directed. |
| 64 | M&L for preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel painting complete all as specified and as directed. |
| 65 | M&L for preparation of old painted surface of Steel and iron work of any description not otherwise described over 10 cm. width or girth shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 66 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick wall care putty on plastered surfaces complete all as specified and as directed. |
| 67 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick wall care putty on plastered surfaces complete all as specified and as directed. |
| 68 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 69 | M&L for Vitrified light shade ceramic tiles 10 mm thick (square/ rectangular ) polished, area of each tile not exceeding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and as directed. |
| 70 | M&L for non skid coloured ceramic floor tiles 7-8 mm thick (square/ rectangular ) area of each tile exc 0.11 sqm but n.exc 0.18 sqm , set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and as directed. . |
| 71 | M&L for non skid coloured ceramic tiles 7-8 mm thick (square/ rectangular ) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and as directed. |
| 72 | M&L for glazed ceramic coloured tiles 450 x 300 x 7 mm / 350 x 250 x 7mm in vertical surface fixed over and including 10mm thick back coat in CM 1:4, set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and as directed. |
| 73 | S & F in repair Vitreous China squatting pan , \\"Orissa\\" pattern size 580 X 440 mm white with integral footrest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap complete including provision of cement concrete complete all as specified and as directed. |
| 74 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern) white (including 'P' or 'S' trap) with seat cover including connection to drain (or out going pipe and to flushing pipe anti shyphonic pipe etc completely fixed in repairs. |
| 75 | S & F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device. |
| 76 | Supply and fixed in repair PVC valve less symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs. |
| 77 | Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 78 | Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 79 | Supplying and fixing 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specified and as directed. |
| 80 | Supplying and fixing 25 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/complete all as specified and as directed. |
| 81 | M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and as directed. |
| 82 | Demolition of stone slab and tiles of any description or thickness in floors,approns laid , bedded and pointed any mortar etc . |
| 83 | M&L for machine cut kota stone slab flooring 20-25mm set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:4 including grinding, rubbing and mirror polishing to achieve a high-gloss smooth surface finish complete all as specified and as directed. |
| 84 | M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM 1 :4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding to edges including rubbing and polishing etc complete all as specified and directed. |
| 85 | S&F in repair mild steel 25mm dia, drapery curtain rods power coated, decorative type complete all as specified and directed. |
| 86 | S&F in repair mild steel, powder coated brackets, decorative type for 25mm dia curtain rods, complete all as specified and directed. |
| 87 | S & F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erecting stand but exclusive of fixing of supply of waste pipe complete all as specified and as directed. |
| 88 | S & F in repair 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 89 | Supply and fixed in repair 15 mm bore two way Bib taps fancy type cast copper alloy Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 90 | Supply and fixed in repair 15 mm bore Bib taps fancy type cast copper alloy Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 91 | S & F in repair 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 92 | S & F in repair 15 mm dia Brass Stop valves/angle cock , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, , screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 93 | S & F in repairs 15 mm dia Bib tap standard of PTMT any colour screwed for iron pipe (minimum weight 90 gms) complete all as specified and as directed. |
| 94 | S & F in repair 15 mm dia Stop valves of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and as directed. |
| 95 | S&F in repair brass Chromium plated 125mm size shower roses with or without swivel joints, any size, including fixing to steel pipe or union, etc complete all as specified and directed. |
| 96 | S & F in repair PVC waste pipe 900 mm long with complete fitting etc 32 mm dia complete all as specified and directed. |
| 97 | S & F PVC connection 15mm dia, 60 Cms long with brass ferrules on both ends fixed in repairs. |
| 98 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 99 | Demolition of cement concrete (unreinforced) on roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and as directed. |
| 100 | M&L for Type E2 1:5:10 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete (sunken floor filling) complete all as specified and as directed. |
| 101 | M&L for 15mm thick rendering in cement mortar1:3 with WPC @200ml per one bag of cement on fair faces of brick or concrete surface, etc completed all as specified. (WPC will be paid separately) complete all as specified and as directed. |
| 102 | M&L for a coat of bitumen VG-10 @ 1.20 kg/sqm over a coat of bitumen primer 0.70 kg/sqm for sunken floor complete all as specified and as directed. |
| 103 | M&L for APP modified pre-fabricated five layer water proofing membrane 3 mm thick not less than 3.60 kg/sqm applied on sunken floor as per manufacturer instruction complete all as specified and as directed. |
| 104 | Supply only integral water proofing compound complete all as specified and as directed. |
| 105 | M&L for 75 mm PVC Nahani/ floor trap plain with grating including jointing with solvent cement including removal of existing nahani/ floor trap complete all as specified and directed. |
| 106 | M&L for cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges mixed with water proofing compound at 200ml per bag of cement and self curing admixtures to prevent leakages and seepages, finishing the surface even and smooth without using extra cement complete all as specified and as directed |
| 107 | Demolition of cement concrete (Un-reinforced) in roof n exc. 15cm thick including removing of existing felt and removal of debris complete all as specified and as directed |
| 108 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate and WPC) as in roof padding followed by 14 days water curing with ponding complete all as specified and as directed. |
| 109 | Cutting out V - grooves in plaster / masonry and inserting the waterproofing membrane and making good in CM 1:3 complete all as specified and as directed. |
| 110 | M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bituminous primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and providing necessary slope with using WPC @ 2% by weight of cement complete including taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbing down with water to receive new treatment complete all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item) |
| 111 | Cleaning of septic tanks completely by empting the liquid/semi solid foul contents mechanically or manually as specified completely, cleaning inlets and outlets etc including disposal of soil sludge complete all as specified and as directed. |
| 112 | Cleaning of drain pipes upto 300 mm dia by rodding from manholes by mechanically or manually all as specified and cleaning eye including well flushing and placing back manholes covers after cleaning complete all as specified and as directed. |
| 113 | Thorough cleaning of sewage manholes / inspection chambers of any size and depth upto 1.2m from GL. The work involves: (a) Opening of manhole covers and providing adequate ventilation to ensure the escape of toxic gases (H2S, Methane). (b) Manual or mechanical removal of accumulated sludge, silt, grit, solid waste, and any other obstructions from the floor, benching, and channel of the manhole. (c) Scrubbing of internal walls and benching to remove fungal growth/algae. (d) Immediate removal and carting away of the extracted sludge from the premises in sealed containers to the outside of MD land complete all as specified and as directed. |
| 114 | Thorough cleaning of sewage manholes / inspection chambers of any size and depth more than 1.2m from GL. The work involves: (a) Opening of manhole covers and providing adequate ventilation to ensure the escape of toxic gases (H2S, Methane). (b) Manual or mechanical removal of accumulated sludge, silt, grit, solid waste, and any other obstructions from the floor, benching, and channel of the manhole. (c) Scrubbing of internal walls and benching to remove fungal growth/algae. (d) Immediate removal and carting away of the extracted sludge from the premises in sealed containers to the outside of MD land complete all as specified and as directed. |
| 115 | Systematic rectification of leakages at the entry and exit pipe junctions within the manhole by Chipping away failed cement mortar or old \\"benching\\" around the pipe circumference to a depth of 50mm. And applying a high-strength, fast-setting, non-shrink hydraulic cement or epoxy-modified mortar to seal the annular space between the pipe and the wall. Complete all as specified and directed |
| 116 | Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil completely all as specified. |
| 117 | Excavation in trenches n.exc 1.50m wide and depth exc. 1.50 m but n. exc 3 m and getting out in hard/dense soil completely all as specified. |
| 118 | Excavating over areas, n exc 1.5 m deep and getting out mud complete all as specified and as directed |
| 119 | Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm complete all as specified and as directed. |
| 120 | Removing excavated materials n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils complete all as specified and as directed. |
| 121 | Demolition and breaking up drain pipes (SGSW/AC/PVC/RCC) set in cement mortar, Internal dia of pipe upto 110 mm, etc complete all as specified and as directed. |
| 122 | S & F 110 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed. |
| 123 | S & F in repair 75 mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified and as directed. |
| 124 | S & F in repair for PVC (SWR) branch piece, single (single Y) equal or unequal, bore of pipe in 110 mm, etc complete all as specified and as directed. |
| 125 | S & F in repair for PVC (SWR) branch piece, single (single Y) equal or unequal, bore of pipe in 75 mm, etc complete all as specified and as directed. |
| 126 | M&L for in repair 110 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and as directed. |
| 127 | M&L for in repair 75 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and as directed. |
| 128 | S & F in repair PVC (SWR) bends any radius 75 mm dia, complete all as specified and as directed. |
| 129 | M&L for in repair 110 mm bore PVC( SWR ) junction single ,(singleT) equal or unequal, including taking down complete all as specified and as directed. |
| 130 | M&L for in repair 75 mm bore PVC( SWR ) junction single ,(singleT) equal or unequal, including taking down complete all as specified and as directed. |
| 131 | M&L for in repair 110 mm bore PVC( SWR ) reducer, including taking down complete all as specified and as directed. |
| 132 | S & F in repair PVC (SWR) vent cowl, bore of pipe in 75 mm, etc complete all as specified and as directed. |
| 133 | S & F in repair PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specified and as directed. |
| 134 | Dismantling timber scantling not exceeding 40 Sqcm completely all as specified. |
| 135 | Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required completely all as specified. |
| 136 | Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required completely all as specified. |
| 137 | M&L for Reinforced cement concrete pipes, 150mm bore, class NP2, conforming to IS 458, laid and jointed complete with collars laid in trenches including taking down existing pipe, complete all as specified and directed. |
| 138 | M&L for Reinforced cement concrete pipes, 200mm bore, class NP2, conforming to IS 458, laid and jointed with collars laid in trenches including taking down existing pipe etc., complete all as specified and directed. |
| 139 | M&L for Plain cement concrete (1:3:6) type C2 (40mm graded stone aggregate) as concrete bed to drain pipes and manholes of any dia including forming cradles in and including demolition of existing concrete complete all as specified and directed |
| 140 | Cutting holes into or through brick walls built in cement mortar for removing/refixing PVC/CI fittings and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, superficial area exc 150 sq cm and n exc 400 sq cm each completely all as specified. |
| 141 | Cutting holes into or through brick walls built in cement mortar for removing/refixing PVC/CI fittings and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, superficial area exc 400 sq cm and n exc 0.10 sq m each completely all as specified. |
| 142 | M&L for Walling of random rubble using Secunderabad stone, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 143 | M&L for flush pointing with cement mortar 1:4 to random rubble masonry, uncoursed or brought up to courses complete all as specified. |
| 144 | M&L for cleaning/removing all vegetation, bushes/small trees on vertical side of wall/chhaja/slab of building and making good the surfaces with PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) or rendering in CM (1:3) including removing spoils obtained to a distance not exc 50 metre and depositing complete all as specified and directed. |
| 145 | Cutting & trimming of tree branches any girth and size touching to sewage lines and cleaning the distance 1.5 mtr both sides of overhead line with in a gap of span 40 mtrs each and removing the same cleaning the site completely all as specified. |
| 146 | M&L for Rendering, 15mm thick , in two coats 10mm thick in CM 1:6 and 5mm thick in CM 1:4 mixed with water proofing compound at 200ml per bag of cement or as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 147 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and as directed |
| 148 | M&L for preparation of old decorated surfaces of walls plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white wash to walls, white or tinted complete all as specified and as directed. |
| 149 | M&L for preparation of old surfaces of plaster or concrete work of any description not otherwise described over 10 cm. width or girth by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 150 | M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) set in CM 1:4 as in benching to manholes complete all as specified and as directed |
| 151 | Demolition of cement concrete of any description in any position (Reinforced) complete all as specified and directed |
| 152 | S & F TMT bars 6mm dia and over up to and including 8mm dia as in reinforcement, including binding with and including tying with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed |
| 153 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 154 | M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes / drains etc. including necessary form work set in CM 1:4 all as specified. (Reinforcement will be measured & paid separately) |
| 155 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-20 Grade, with grey cement and no pigment set and jointed as per manufacturers instructions, laid over sand cushioning, including dismantling the existing stone slabs/tiles of any description or thickness etc. complete all as specified and directed. Note: (i) Rate quoted by the tenderer shall deemed to inclusive of filleting the sides of pavement with plain cement concrete (1:2:4) type B1, finished even and fair.(ii) Sand cushioning shall be measured and paid separately |
| 156 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 157 | M&L for chequered cement concrete, coloured tiles, textured finished of size 300 x 300 x 22 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 158 | Dismantling fencing wire mesh, any type complete all as specified and as directed |
| 159 | S&F 5.00 mm (over all dia) PVC coated GI chain link fencing having 3.0mm dia GI wire and 1.0mm thick PVC coating both side and size of mesh 60mm x 60mm complete all as specified and as directed. |
| 160 | S&F MS Screw bolts hot dip galvanized machine made with hexagonal or square heads at one end and screwed the other or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nut 5 to 10mm dia meter of neck exc 5cm but n exc 10cm long all as specified and as directed. |
| 161 | S&F 8mm dia and over MS deformed bars, cut to length bent to shape required, including cranking, bending and binding with MS wire(annealed) not less than 0.9 mm dia all as specified and as directed |
| 162 | S&F in repair galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 163 | M&L for moorum/red bajri filling in berm or pavings, laid in layers n. exc.15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 164 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc. complete all as specified and as directed |
| 165 | S&F mild steel Framed work as in doors or gates of ornamental and intricate design with angle or other section with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete using Steel Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed |
| 166 | S&F MS work as in fencing post and struts including cutting tops to shape as directed , drilling holes, notching for wire etc., flat iron fillets,nuts & bolts etc. for securing wire mesh including all necessary drilling, bolting or riveting etc., similar works con forming to Fe-410 or Fe-310 grade, complete all as specified and as directed. |
| 167 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, posts embedded in natural ground, etc. complete all as specified and as directed. |
| 168 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, and getting out in soft/loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed |
| 169 | M&L for Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, post hole filling etc. complete all as specified and directed. |
| 170 | M&L for PCC (1:2:4), type B0 (using 12.5 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
