|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: SPL REPAIR TO BLDG NO P-33 CCH/DH 8 FR ,WOODEN FLOORING (P-62) AND STEEL GATE NEAR RP GATE OF DB UNDER GE 881 EWS. Contract No : GE/PNH-46/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R portion:Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 3 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 4 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 6 | Dismantling of timber scantling under 40sqcm in section unframed work as in fillets, rails, posts, rafters, purlins etc, complete all as specified and directed. |
| 7 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 8 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 9 | Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 10 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed. |
| 11 | Rendering 15mm thick fair faces of brick or stone masonry wall surfaces in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 12 | Rendering 15mm thick other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 13 | Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 14 | Preparation of newly plastered or unplastered surface of wall and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 3mm thick wall care putty complete all as specified and directed |
| 15 | Complete removal of existing treatement from wall plaster and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 3mm thick wall care putty complete all as specified and directed |
| 16 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 17 | Walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 18 | All as per ser Item No 16 above but except stone, complete all specified and directed |
| 19 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 20 | 75mm thick PCC 1:4:8 Type D-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 21 | 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed. |
| 22 | Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 23 | 20-25mm thick Machine cut Kota stone slab flooring, bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, grinding and mirror polishing complete, all as specified and directed. |
| 24 | Machine cut pre polished Kota stone 18-20 mm thick as in riser of steps, skirting, dado and pillar fixed over & including cement plaster 10 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the kota stone including rubbing and polishing, complete all as specified and directed. |
| 25 | 16-18mm thick Granite (of any type) as in steps, jambs, pillars, window-cills,cooking plaforms, etc. machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over screed bed in CM 1:4 and including grinding, polishing, rounding of edges complete all as specified and directed. |
| 26 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 27 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 28 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 29 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in leveling course to floor surface ,finished the surface even & fair complete all as specified and directed. |
| 30 | Taking down shutters of any description exceeding 1sqm and not exceeding 2sqm each, complete all as specified and directed. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each, complete all as specified and directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5Sqm each, complete all as specified and directed. |
| 33 | Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type B-0 in back filling of chowkats & tarring back of chowkats and hold fasts.complete all as specified & directed. |
| 34 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type B-0 in back filling of chowkats & tarring back of chowkats and hold fasts. complete all as specified & directed. |
| 35 | 35mm thick 2nd class soft wood (kail) plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed. |
| 36 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete, all as specified and directed. |
| 37 | Steel windows with side hung shutters including projecting type hinges with steel handle,steel peg stay and locking arrangements. complete with glazing bars, dovetailed or welded, complete all as specified. |
| 38 | Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed. |
| 39 | Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified. |
| 40 | Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.and directed. |
| 41 | Supply and fixed in repair in Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.and directed. |
| 42 | Preparation of new wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying two coats synthetic enamal paint over a coat of pink primer, complete all as specified and directed. |
| 43 | Preparation of old wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat two coats synthetic enamal paint, complete all as specified. |
| 44 | 100mm long mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed. |
| 45 | 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 46 | 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 47 | Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed. |
| 48 | Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 49 | 300mm long aluminium alloy anodized sliding door bolt with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed. |
| 50 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 51 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in repair in opening as per specification & drawing complete all as specified and directed. |
| 52 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge. |
| 53 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 54 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 55 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 56 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed, complete all as specified and directed. |
| 57 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 58 | 15mm bore Stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 59 | 15mm bore Stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed.. |
| 60 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 61 | 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe and fixed.complete, all as specified & directed. |
| 62 | Steel water tubing 15mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 63 | Steel water tubing 20mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified and directed. |
| 64 | PVC connection 15mm size with PTMT nuts of length 600mm long fixed, complete all as specified and directed. |
| 65 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified and directed. |
| 66 | PVC (SWR) type 'B' pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches/floors as soil pipe, fixed in repair, complete all as specified and directed. |
| 67 | Supply and fixed in repair Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 68 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with 100mm dia PVC(SWR) 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and siphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified & directed. |
| 69 | PVC valveless symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed in repair, complete all as specified and directed. |
| 70 | Supply & fixed in repair, Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. |
| 71 | Towel Ring of PTMT fixed with and including Chromium plated brass screwsand wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed. |
| 72 | 600mm x 600mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | PVC (SWR) type 'B' pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/floors as soil pipe, fixed in repair, complete all as specified and directed. |
| 74 | PVC (SWR) bends any radius 100mm dia, complete all as specified and directed. |
| 75 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 76 | Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm with hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and providing 4mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and as directed. |
| 77 | Chequered cement concrete tiles 300x300x 25mm thick, set & jointed in neat cement slurry in floors and pointed with white cement with mixture of pigments to match with the colour of tiles, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 78 | Wooden tiles 9 to 10mm thick (Squre/Rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and fixed with adhesive chemical as per manufacturer instructions including cutting, jointing and dismantling. Complete all as specified and directed. |
| 79 | 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in leveling course to floor finishing surface even and fair,complete all as specified and as directed. |
| 80 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed. |
| 81 | Framed work such as grills,gratings, etc.. with ends of bars gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for ornamental and intricate design. complete all as specified and directed. |
| 82 | Rolled mild steel in Fe 410-W (Gde E-250) quality-A plates 3.15mm thick covering to steel gate.complete all as specified and directed. |
| 83 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for shafts, wells,cesspits, man holes, pier holes,laying of cables etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified and directed. |
| 84 | Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed. |
| 85 | RCC M-25(design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge. |
| 86 | RCC M-25(design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 87 | RCC M-25(design mix) using 20mm graded crushed stone aggregate as in slabs, lintels/bands including necessary form work, complete all as specified and directed. |
| 88 | RCC M-25(design mix) using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span.complete all as specified and directed. |
| 89 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed. |
| 90 | TMT bars, 5mm dia and over upto including 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified and directed. |
| 91 | Form work to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete complete all as specified & directed. |
| 92 | Form work to sides of pillars, posts, struts piers, columns and stanchions and similar works fair finished surface of concrete complete all as specified & directed by Engineer-in- charge. |
| 93 | Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces of concrete, complete all as specified and directed. |
| 94 | Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc with fair finished surface of concret complete all as specified & directed. |
| 95 | HD Elevation exterior wall cladding tiles of size 300x450x8mm thick as in vertical surface set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles, laid over 10mm thick cement plaster in CM 1:4 etc. complete all as specified and directed. |
| 96 | Rendering 5mm thick on fair faces of ceiling using cement mortar 1:3 and finished the surface even and smooth without using extra cement, complete, all as specified and directed. |
| 97 | Rendering 10mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:3 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 98 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 99 | Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed. |
| 100 | Plain cement Concrete 1:3:6 type-C1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified and directed. |
| 101 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, in any type of soil, complete all as specified and as directed. |
| 102 | Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 103 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge. |
| 104 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed. |
| 105 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 106 | Machine pressed precast concrete interlocking paver block any shape with grey cement and no pigments confirming to IS-15658-2006 , 80mm thickness M-40 Grade, of any shape and size laid over dry sand cushioning tightly , complete all as specified and directed. |
| 107 | PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sealing edges of interlocking tiles of path and pavings etc.complete all as specified and directed. |
| 108 | Surface excavation not exceeding 30cm deep and average 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 109 | Excavation in post holes each not exceeding 0.5 cum getting out in any type of soil, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and directed. |
| 110 | Joist,channel angle or tee sections fixed independently without connecting plates etc (cut to ordinary lengths i.e with in 20mm of the length indicated) confirming Fe 410 W Gde E 250 quality 'B' complete all as specified and directed. |
| 111 | Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleatsetc Fe 410W(Gde E-250), quality 'B' complete all as specified and directed. |
| 112 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 113 | Chequered cement concrete tiles 200x200x 25mm thick, set, jointed in neat cement slurry in floors and pointed with mixture of white & grey cement in equal proportion & no pigment laid over and including 20mm thick screed bed in CM 1:4,complete all as specified and directed. |
| 114 | Brass letters of 30cm height, 40mm width, 5mm thick fixed upon concrete/stone surfaces with the help of clips/glue etc. complete all as specified and directed. |
| 115 | Transparent display box type board having suitable LED lights of size 5.50x0.75x0.20 Meter made up of 3 to 4mm thick acrylic sheet with suitable size framing and fixing arrangement etc. complete all as specified and directed. |
| 116 | E/M Portion:Taking down carefully copper/ aluminium unserviceable/ perished point wiring with casing caping (light, fan, socket or power complete) including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 117 | Taking down unserviceable sub main wiring including earth continuity any type / size and making good to disturbed surfaces to match with the existing finishes etc.complete all as specified and directed. |
| 118 | Point wiring with 2 x 1.5 sqmm (as phase and neutral) and 1 x 1.5 sqmm (as earth continuity conductor) multistranded copper conductor cable connected to common earth dolly,1100 volts grade , FRLS, PVC insulated and including PVC casing caping of suitable size with accessories and PVC boards of appropriate sizes and all requisite accessories complete for the followings:- |
| 119 | One light/fan point (Ceiling and Exhaust) controlled by one switch complete all as specified and directed. |
| 120 | One 5 Pin switch socket combination 6 Amp on same board complete all as specified and directed |
| 121 | One 5 Pin switch socket combination 6 Amp on independent board complete all as specified and directed. |
| 122 | All as per item No.117 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 16/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 123 | Ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed. |
| 124 | Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. |
| 125 | Socket outlet multipurpose combination 2 in 1, 5 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 126 | Switch socket multipurpose combination 5 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 127 | Switch socket multipurpose combination 2 in 1, 5 pin,15 Amp flush type universal,complete all as specifed and directed. |
| 128 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 129 | Inverter LED Lamp, CDL, 10/12 watt, B22 base all as specified and as directed. |
| 130 | Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed. |
| 131 | Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours and connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified directed. |
| 132 | LED tube light fittings mirror type with high out put diffuser 2 feet , 10 watt 220 volt AC decorative box type with driver and connecting up with three core flexible copper conducor cable of suitable size from ceiling rose complete all as specified directed. |
| 133 | S&F in repair building security light fittings, 35 watt LED,230v, AC out door type pre-wired, IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 134 | S&F in repair ceiling fan from site of 1200/1400 mm sweep and providing new BLDC ceiling fan of 1200 mm sweep, 230 V, 50 hz including all connecting accessories complete all as directed by engineer-in-charge. |
| 135 | Supply and Fixing in repair Vertical TPN DB sheet metal enclosure double door (IP-43), 4 Ways, built- in bus bars complete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed. |
| 136 | New instant electric water heater/geyser, heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, branded PVC connections with nuts etc. complete all as specified and directed. |
| 137 | Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP complete all as specified and directed. |
| 138 | Exhaust fan,steel body AC single phase, 230V of size 450mm sweep with blades and louvers including all accessiries etc.complete all as specified and directed. |
| 139 | Supply and Fixing in repair sheet metal enclosure SPN DBs double door (IP-43), 12 Ways with neutral link complete suitable for 240 volts,AC, 50Hz. complete all as specified and as directed. |
| 140 | MCCB, TPN 415V breaking capacity 10KA, rating 25 to 100 Amps, complete all as specified and directed. |
| 141 | MCB, SPN 240V breaking capacity 10KA, rating 40 to 63 Amps, complete all as specified and directed. |
| 142 | Supplt and fixed in repair MCB, SP 240V breaking capacity 10KA, rating 6 to 32 Amps.complete all as specified and directed. |
| 143 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 144 | Supply and laying DWC HDPE pipe for protectionn of power cable (orange colour) of size 50mm dia fittings including cutting, jointing and clamping etc. complete all as specified and directed. |
| 145 | Submain wiring with two single core 6 Sqmm PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade and one single core 6 Sqmm as earth continuity conductor drawn in and including PVC casing caping of suitable size with accessories complete all as specified and directed. NOTE: (i) Two run of 6 Sqmm and one run of 6 Sqmm copper cable including casing caping shall be measured as one unit. |
| 146 | Supply and laying in trenches on floor/ pole/ under road/ culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25Sqmm 4 core including taking down old/unserviceable cable any type.complete all as specified and directed. |
| 147 | Round shape 15 watt 230 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all specified and directed. |
| 148 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection. complete all as specified and directed. |
| 149 | Supply and Fixing in repair sheet metal enclosure SPN DBs double door (IP-43), 8 Ways with neutral link complete suitable for 240 volts,AC, 50Hz. complete all as specified and as directed. |
| 150 | Supply and laying in trenches on floor/ pole/ under road/ culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16Sqmm 2 core including taking down old/unserviceable cable any type.complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
