|
| 1 | M&L Glazed ceramic tiles in vertical surfaces of size 300x450mmx7mm thick including over 10mm thick Screed bed or bedding layer in Cement Mortar 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm over & including 15mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down and rubbish off the premises complete all as specified and as directed by the Engr-in-Charge. |
| 3 | M&L machine cut Kota stone of size 45 x 45cm or 60 x 60 cm, (selected quality) slab flooring 20 to 25 mm thick laid in slope and jointed with grey cement slurry mixed with pigment to match the shade of slab over and including screed bed of 20mm thick in Cement Mortar 1:4 and taking down old and rubbish off the premises complete, all as specified and as directed by Engr-in-Charge. |
| 4 | M&L 20-25 mm thick machine cut Kota stone slab (selected quality) staircase skirting, dado and pillar fixed over and including screed bed of 20mm thick in Cement Mortar 1:4 and taking down old and rubbish off the premises complete, all as specified and as directed by Engr-in-Charge. |
| 5 | M&L Polished granite stone slab 18- 20mm thick coloured as in cooking platform/door sills, partitions, jambs, pillars, window-cills, set in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling existing and rubbish off the premises complete all as specified and as directed by EIC complete. |
| 6 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 7 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 8 | Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. |
| 9 | S & F for 30mm thick flush shutters, solid core construction, with block core plywood face panels, commercial type on both sides, chemically treated against termite infestation complete all as specified and directed. |
| 10 | S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters all as specified and directed by Engr-in-Charge. |
| 11 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately)Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 13 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries |
| 14 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE. |
| 15 | S&F II class HW plain solid straight chowkat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 16 | S&F 100mm long butt hinges medium weight stainless steel with ISI mark, complete all as specified and directed. |
| 17 | S&F stainless steel sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts complete all as specified and as directed. |
| 18 | S&F stainless steel barrel tower bolt 150mm long complete all as specified and as directed. |
| 19 | S&F stainless steel handle fabricated type 150mm long complete all as specified and as directed. |
| 20 | Supply and fix 140mm size Floor door stopper of stainless steel body and tongue, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 21 | Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 22 | Supply and fixing brass mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter, complete all as specified and directed. |
| 23 | M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, complete all as specified. |
| 24 | S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 410-0 or Fe310-0. |
| 25 | M&L plain cement concrete 1:3:6 type C1, (20mm graded crushed stone aggregate) for fixing hold fasts complete all as specified and directed. |
| 26 | S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed to aluminium/ wooden Vent/window/door (cost of aluminium beads and neoprene included in relevant item of aluminium window) complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
| 27 | S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed to aluminium/ wooden Vent/window/door (cost of aluminium beads and neoprene included in relevant item of aluminium window) complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
