|
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for rendering 10mm thick on brick work or concrete surfaces in cemet mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for rendering 5mm thick as on ceilings or concrete surfaces in cemet mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and labour for rendering 15mm thick on brick work or concrete surfaces or on chajjas / parapet walls etc in cemet mortar 1:4 mixing with liquid water proofing compound as per manufacturer's instructions finished even and fair without using extra cement including fixing of chicken wire mesh where directed complete all as specified and as directed by Engineer-in-Charge. Note: Liquid water proofing compound and Chicken wire mesh shall be measured and paid as supply only separately |
| 5 | Supply only integral liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for complete removal of existing treatment of any type / description from ceilings /RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Material and labour for writing letters or figures (Block, Roman, Italic or Indian ) n. exc. 30 cm high with thick paint so that letters standout boldly and solidly without showing sign of brush marks including all stops, commas, short lines. dashes, hyphens, brackets etc. complete all as specified and directed. |
| 9 | Material and labour for preparation of old surface of wall including crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler and applying two coats of oil bound distamper white or tinted over and including a coat of primer complete all specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for prepration of plastered surface of walls and applying applying plaster of paris putty of 2 mm thickness over plastered surface to achieve the smooth surface complete all as specified and as directed by Engineer-in-charge. |
| 11 | Material and labour for prepration of puttied surface and applying 02 coats of exterior emulsion weather proof paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc over & including a coat of exterior wall primer applied @ 10 sq.m/1.43litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and as directed by Engineer-in-charge. |
| 12 | Material and labour for preparation of old plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for Preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge. |
| 14 | Material and labour for prepration of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed by Engineer-in-charge. |
| 15 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm including cutting holes in brick walls to required shape for hold fast block for new frame and making good to existing surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Taking down chowkhats or frames (without taking off shutters from the frame) n.exc 1.5 Sqm including cutting holes in brick walls to required shape for hold fast block for new frame and making good to existing surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast / lugs / SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | Supply and fixing factory made double extruded/rebated WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 150 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | Supply and fixing factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5 mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing the following builder hardware complete all as specified and as directed. (a) Stainless Steel (304 Grade) Butt Hinges 150mm - 3 nos per leaf(b) Aluminium Tower Bolt 150mm long - 2 nos per leaf(c) Aluminium Handles 150 mm - 2 nos per leaf |
| 21 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws and providing the builder hardware as detail below complete all as specifed and directed by Engineer-in-charge.(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 22 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type plain wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. Incl fixing of stainless steel 304 Grade wire cloth (wire dia. 0.56mm) and Expanded stainless steel, wire dia 1.20 mm thickness and mesh aperture size 38x20mm (LWxSW) combinly panel panel area of door excpet stiles and rail to be panelled with mesh wih self tapping round headed screws at requried distance,scres and edges covered with feathered pvc edge beading all round of mesh and WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,and providing necessary hardware as detail below complete all as specifed and directed by Engineer-in-charge.(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 23 | Supply and fixing 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including necessary welding for fixing to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for ( reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Material and labour for reinforced cement concrete (Normal mix) type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies,deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labour for formwork to soffits of suspended slabs such as roof slabs,floor slabs,landing and similar work not exceeding 200 mm thick (Horizontal or slopping) for rough finished surface of concrete flat complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for(rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and labour mild steel TMT bars 10mm dia and over of grade Fe-500D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Material and labour for TMT steel bars 6 to 8 mm dia, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material and labour for reinforced cement concrete (Nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) as in chullah hoods ,chajjas, stairways (except spiral staircase ) including steps(square or spandril),string pieces,carriges etc complete any section straight or winding but excluding landings complete all as specified and as directed by Engineer-in-charge. |
| 31 | Material and labour for flat formwork to chullah hoods, chajjas, troughs and similar items including edges flat for rough finish surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Supply and fixing stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets / finials fency type, stops fixed with SS screws etc complete all as specified and as directed by Engineer-in-Charge.. |
| 33 | Supply and fixing in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Supply and fixing in repair of stainless steel sink with drainage board,1.00 mm thick, glossy finish, for kitchen with plugs washers, SS waste coupling for 32 mm bore pipe including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed by Engineer-in-charge. |
| 35 | Material and labour for cement concrete type C-2, 1:3:6 ( using 40mm graded stone agrregate ) as in sub base of floors, in base for PVC tanks or mass concrete etc complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Demolition of Stone slabs and tiles of any description or thickness in floors, wall and aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 37 | Material and labour for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms, laid over and including 15 mm thick screed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Including rounding exposed edges and grinding in adhesive granite finish complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Material and labour for Baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut, laid over & including 15 mm thick (average thickness) cement mortar (1:3) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), over cooking platform shelves , RCC counters, window cills & similar situations in one piece of full length including rounding exposed edges and grinding to achieve granite finish and making two no of grooves of size 3mmx3mm as in steps complete all as specified and directed by Engineer-in-Charge. |
| 39 | Material and labour for vitrified ceramic light shade tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc laid over and including 15 mm thick screed bed in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge. |
| 40 | Material and labour for baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut,as in skirting and dados. set and jointed in cement slurry laid over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement mixed with pigment to match the shade of marbel complete all as specified and as directed by Engineer-in-charge . |
| 41 | Material and labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,as in floors etclaid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labour for Glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as in skirting/dado etc in any pattern of light & dark/highlighters tiles etc as approved, laid over and including 10 mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and as directed by Engineer-in-charge. |
| 43 | Material and labour for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors, steps, cills etc. in any pattern of light & dark shade tiles as approved, laid over & including 20 mm thick screed bed in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixing in repair brass chromium plated overhead shower 70mm dia with 235 mm long shower arm and including all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing in repair bib taps cast copper alloy, fancy type, long body chromium plated with crutch or butterfly handle, screwed down screwed for 15 mm bore dia iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing in repair of wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore dia connections complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 47 | Supply and fixing in repair of wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore dia connections complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
