Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | S&F High performance component brushable elastomeric polyurea waterproofing coating cold applied with brush/roller smartcare damp proof xtreme / Weather pro top shield elastromeric/ ultraseal BA or approved equivalent on any horizontal or vertical surface liquid membrane with white in color with an elongation of Min 200% vertical & Min 300% horizontal surfaces and tensile strength of 1.5 N/mm2 @DFT 1mm as per ASTM D 2370, Min 55 % Solid Content, shore A Hardness of min 70, system includes final base preparation using polymer primer/ Epoxy application @ 200-250gms/sqm, depending upon the surface porosity and crack bridging ability 3.50mm horizontal & 1.2mm vertical applying Smart care Damp proof xtreme / Home Shield Ultraseal BA or approved equivalent in two coats at not less than 0.93Sqm/ltr in horizontal & 2.79-3.25Sqm/ltr in vertical surfaces,including taking down existing treatment of any description & complete all as specified and directed. |
| 2 | M&L for 25mm thick PCC(1:2:4) type B0 using 12.50mm graded stone aggregate as in padding on roof finished even & smooth using extra cement complete all as specified and directed. |
| 3 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust & Brushing neat cement slurry with 3.0kg of cement per sqm etc complete all as specified and directed. |
| 4 | M&L rendering 15mm thick on concrete in CM 1:3 in facia or edging of chajjas, ceiling and roof projection etc incl taking out peeled off plaster/concrete and making good to cracked RCC surface in true line/shape by providing PCC 1:2:4 type B1 using 20mm graded stone aggregrate incl necessary formwork to thickness required at ground floor and first floor etc. finish surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | Supply only liquid water proofing compound complete all as specified and directed. |
| 6 | M&L 15 mm thick plastering on external surfaces in cement mortar 1:4 on brick surfaces or concrete surface, finished even and smooth without using extra cement incuding mixing of wpc including taking down cement plaster of any description and any thickness on brick/stone/concrete surfaces complete all as specified and directed.(Note - Integral water proofing compound shall be measured & paid separately.) |
| 7 | M & L for Brick work with sub class 'B' bricks, straight or curved on plan on exceeding 6m mean radius, using old size brick, built in cement mortar 1:6, incl demolition of brick work or stone /boulder masonry complete all as specified and directed. |
| 8 | All as per item No 7 here-in-before but except bricks, incl demolition of brick work or stone /boulder masonry complete all as specified and directed.Note : Old bricks obtained against demolition shall be used. |
| 9 | M&L 15 mm thick plastering in cement mortar 1:4 on brick surfaces or concrete surface, as on external surfaces, finished even and smooth without using extra cement incuding mixing of wpc complete all as specified and directed.(Note - Integral water proofing compound shall be measured & paid separately.) |
| 10 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint upto 15m height, complete all as specified and directed. |
| 11 | M&L for preparation of old painted steel surfaces of doors/windows/railings/CGI sheet over roof or any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation of old plastered /unplastered surface of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete removal of existing treatment if required for desired shade/colour and applying two coat of cement base paint upto 15m height of wall incl making border or patta on chajja, roof projection, column projection, beam projection etccomplete all as specified and directed.(Colour/shade - as approved by GE) |
| 13 | M&L for complete removal of existing treatment on old surfaces of wall applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over one coat of wall putty of 2mm thickness complete all as specified and directed. |
| 14 | M&L for preparation of old plastered /unplastered surface of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion, with sponge rollers/ spray machine complete all as specified and directed. |
| 15 | M &L for water proofing of exterior walls,including complete removal of existing plaster including raking out joints and applying two coats of Acrylic polymer modified high performance coating (Smartcare Ultra Block 2K). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished fair and even complete all as specified and directed. |
| 16 | M& L for water resistant crack sealant fibre glass reinforced water based crack filling compound, ready to use, very strong adhesion on all absorbent surfaces like plaster, wood, gypsum,pop etc complete all as specified and directed. |
| 17 | M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces, as on internal surface finished even and smooth without using extra cement, including taking down of cement plaster of any description on brick or stone or cement concrete wall incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surface of wall and applying two coat oil bound distemper by sponge roller on newly plastered surfaces incl 2mm thick wall care putty, complete all as specified and directed. |
| 19 | M&L for 5mm thick rendering in cement mortar 1:3 on fair faces as in ceiling surfaces finished even and smooth without using extra cement, including taking down of cement plaster of any description on brick or stone or cement concrete wall incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 20 | M&L for preparation of new plastered ceiling surface and applying two coat white wash on newly plastered surfaces,complete all as specified and directed. |
| 21 | M & L PCC Type B-1 1:2:4 (using 20 mm graded crushed stone aggregates) as in coping, cills, steps, in lintels upto 1.5m clear span and similar other works like bands, plinth courses, lacing courses, bed plates, water troughs and the like incl weathering, slightly rounded or chamfered angles and throating, incl necessary form work,complete all as specified and directed. |
| 22 | M&L for removing/ cutting trees,shrubs, vegetation ,digging out roots from concrete or brick wall filling holes on building (block of 4 to 12 Qtrs) wall/ roof/ chajja/ water staging area etc and making good with CM 1:4 complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping including dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings screws complete all as specified and directed. |
| 24 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour colour as approved by GE, having tensile strength of 550 Mpa as in ridge made to shape roof covering/ cladding to wall, facia, valley gutters etc and fixed with self tapping screws including dismantling of Plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings screws complete all as specified and directed. |
| 25 | S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with screws and washers in roofs,walls etc. with grade of zinc coating 275 including dismantling of Plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern complete all as specified and directed. |
| 26 | S&F 0.63 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 including dismantling of Plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern complete all as specified and directed. |
| 27 | S&F for Roof trusses (framed),verandah posts, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality-A conforming to Fe-290, Gde E-165 including dismantling wrought iron or mild steel work of any description etc complete all as specifed and as directed. |
| 28 | S&F Mild steel framed work such as grills, gates and gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165 including dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 29 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc including dismantling wrought iron or mild steel work of any descriptionascomplete all as specified and directed. |
| 30 | M&L for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specifed and as directed. |
| 31 | M&L PCC type C-2 1:3:6 (40mm graded aggregate) cement concrete in foundation, filling and mass concrete complete all as specifed and as directed. |
| 32 | M&L Second class Soft wood in scantlings, clean sawn, timber fixed in repairs for Wooden Posts/purlins, trusses incl dismantling timber scantlings 40 Sq.cm and over in section, in any positioncomplete as complete all as specifed and as directed. |
| 33 | M&L for Vitrified Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) including dismantling with bedding (but not backing) complete all as specified and directed. |
| 34 | M&L for 25mm thick PCC(1:2:4) type B1 using 20mm graded stone aggregate as in sub base finished even and rought to received the topping layer complete all as specified and directed. |
| 35 | M & L Non - skid Ceramic tiles Coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete including dismantling ,complete all as specified and directed. Colour, size and pattern to be appproved by GE |
| 36 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 37 | M&L for 75 mm thick PCC 1:3:6, type C-2 (Using 20 mm graded crushed stone aggregate) as in plinth protection etc and finished even without using extra cement, complete all as specified and directed. |
| 38 | M & L for Wall Glazed tiles coloured of size 300x450x8mm/ 1200X 600X9mm thick as approved in vertical surfaces jointed in neat cement slurry and pointed with white/grey cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) or fixing with epoxy grout & fixing chemical if required, including dismantling complete all as specified and directed. Colour, size and pattern to be appproved by GE. |
| 39 | M & L Machine cut kota stone slab flooring 18-20 mm thick over laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Demolition of Stone slabs and tiles of any description or thickness complete all as specified and directed. |
| 40 | M & L Granite of any type tiles 15 to 20mm thick laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) machine cut, bedded and jointed with grey cement slurry and pointed with cement with admixture of pigment to match the shade of granite stone including grinding and polishing & Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded complete all as specified and directed. |
| 41 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern) one piece with flushing cistern white with 'P/S' trap connected to drain or out going pipe and flushing pipe complete including PVC sheet cover closed recesed type with flat bottom , and cover with mild steel chroimum plated or aluminium hinging device complete all as specified and directed. |
| 42 | S&F in repairs Vitreous china urinal Half stall type white of size 400x590 with intergrated CP spreader including CP bottle trap & fittings complete all as specified and directed. |
| 43 | S&F in repairs 8mm thick frosted glass type urinal partition white of size 900x450 mm complete all as specified and directed. |
| 44 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured as approved (incl fixing bolts, excluding flushing cistern and flush pipe) including Seat and cover for pedestal pan complete all as specified and directed. |
| 45 | S&F as in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed |
| 46 | S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, white / coloured as approved inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with PTMT coupling nuts and PVC washer at both ends, complete all as specified and directed. |
| 47 | S&F in repairs viterous china, white/coloured as approved, flat back wash hand basin of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed. |
| 48 | S&F fixed in repairs for Vitreous china wash basin,white oval type centre top size 550 x 420mm excluding taps, incl CP bottle trap & fittings complete all as specified and directed. |
| 49 | S&F in repair vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white/coloured as approved with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed. |
| 50 | S&F in repair Steel water tubing, 15mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc including taking up or down complete all as specified and directed. |
| 51 | S&F in repair Steel water tubing, 20mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc including taking up or down complete all as specified and directed. |
| 52 | S&F 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in wall/ ceiling or laying in floors including taking up or down of existing old pipes complete all as specified and directed. |
| 53 | S&F in repair Chromium plated toilet paper holder premium quality complete all as specified and directed. |
| 54 | S&F in repair 15mm bore Angle valves, CP fancy type (ISI marked) two way screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed. |
| 55 | S&F in repair 15mm bore stop valves , cast copper alloy, fancy type cromium plated screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 56 | S&F in repair 15mm bore bib taps, fancy type cromium plated with butterfly handle, screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions.including wall flange complete all as specified and directed. |
| 57 | S&F in repairs 15 mm bore Pillar Tap ,fancy type, cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with or withou lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes. |
| 58 | S&F Brass chromium plated WHB/ Sink mixture for mixing hot and cold water for WHB/ sink, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 59 | S&F in repairs PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 60 | S & F 32 mm PVC waste pipe to WHB, sink etc complete all as specified and directed. |
| 61 | S&F in repair brass chromium plated shower rose 125 mm/200mm/250mm size fancy type premium quality round or square shaped with long body with swivel joints including fixing to steel pipe or union complete all as specified and directed. |
| 62 | S&F in repairs sheet glass shelf assembly consisting of 50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 63 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 64 | S&F in repair brass chromium finished ss material tubular towel rail, 600mm long dual towel shelf complete all as specified and directed. |
| 65 | M&L 75mm size PVC (SWR) floor trap, plain with grating including jointing with solvent including taking down old unserviceable floor trap complete all as specified & directed. |
| 66 | S&F PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, fixed in wall including fixing clamps dismantling of CI/PVC pipe 100mm bore fixed to wall or laid in floor or trenches inculding connection etc complete all as specified and directed. |
| 67 | S&F PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, as in floor and trenches dismantling of CI/PVC pipe 100mm bore fixed to wall or laid in floor or trenches inculding connection complete all as specified and directed. |
| 68 | S&F PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, fixed walls including clamps at joints, top and bottom dismantling of CI/PVC pipe 75mm bore fixed to wall or laid in floor or trenches inculding connection complete all as specified and directed. |
| 69 | S&F PVC SWR pipe 75 mm bore single socketed, in any length with rubber ring joints, as in floor and trenches dismantling of CI/PVC pipe 75mm bore fixed to wall or laid in floor or trenches inculding connection complete all as specified and directed. |
| 70 | S&F PVC(SWR) junction single Tee equal or unequal 110mm bore with access door complete all as specified and directed. |
| 71 | S&F PVC(SWR) junction single Tee equal or unequal 75mm bore with access door complete all as specified and directed. |
| 72 | S&F PVC(SWR) bends 110mm bore with access door complete all as specified and directed. |
| 73 | S&F PVC(SWR) bends 75mm bore with access door complete all as specified and directed. |
| 74 | M&L 100mm/75mm size CP floor grating with hole at centre including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed. |
| 75 | S&F in repairs rolled mild steel bands,straps,supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks(stays),heavy,for large gates,hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified and directed. |
| 76 | S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (incl wiremesh and glass) with side hung shutters with steel handle and steel peg stay dovetailed welded incl 2 Nos tower bolts 150mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to flat iron 40x 5m mm frame work , including other fittings ,hinges ,handles tarred hold fasts PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 77 | S&F for Hollow super heavy quality PVC Wall panelling not less than 5mm thick printed PVC sheet used instead of plain colour sheet or decorative vertical fluted pre laminated mdf board material with uniform grooves/flutes (as approved by GE for various locations) inclusive necessary screws, adhesives, edge finishing, backing support and making good to adjoining surfaces including dismantling complete all as specified and directed. Pattern & design to be approved by GE. |
| 78 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications, complete all as specified and directed. |
| 79 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 80 | S&F in repairs 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 81 | S&F in repairs 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 82 | S&F in repairs 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 83 | S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 84 | S&F in repairs 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and directed. |
| 85 | S&F in repairs 18mm thick High density high moisture resistant(HDHMR) laminated board for cupboard/ kitchen cabinets of approved colour & design conforming IS:12406, made from agro fibre with density not less than 800cum including cutting to size, edge finishing, fixing with screws/adhesive fixed over framework of seasoned wooden battens or GI framework of suitable section as required and providing backing support and including hydraulic/ telescopic/ piono hinges, SS handles for shutters as required complete all as specified and directed. |
| 86 | S&F in repairs 75 mm size, hasp and staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 87 | S&F in repairs mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 40mm, complete all as specified and directed. |
| 88 | S&F in repairs rotational moulded polyethylene water storage tank white in colour 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 89 | S & F in repairs rotational moulded polyethylene water storage tank white in colour 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 90 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm-210 gms/ 25mm-455gms/ 40mm -690 gms) |
| 91 | S&F GI 20mm tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) |
| 92 | S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed. |
| 93 | S&F in repair 40mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 94 | S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed. |
| 95 | S&F in repair plastic EWC seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC, complete all as specified and directed. |
| 96 | S&F in repairs 600mm x 450mm bevelled edge frameless pattern mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 97 | S&F in repairs brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed. |
| 98 | M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 99 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 100 | S&F in repairs 25mm drappery rod Stainless Steel fancy/ designer pattern incl brackets Complete all as specified and as directed. |
| 101 | S&F in repairs stainless steel soap dish approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 102 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 103 | S&F in repairs Stainless steel plate rack of size 600mmx750 mm of selected quality including all accessories to fix complete all as specified and directed. |
| 104 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all as specified and directed. |
| 105 | S&F stainless steel peg set of Six/Eight pegs, fixed/welded/soldered on stainless steel base plate of size 300 x30x2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the GE complete all as specified and directed. |
| 106 | Taking down and refixing the same aluminium door shutter after resecuring/ readjusted to aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips,rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap bidding, screw etc. and renew unserviceable items such as fittings, sections, glass, solid PVC sheets, powder coating if required etc complete all as specified and directed. |
| 107 | S&F for 4mm thick E-board (Classic) false ceiling of size 610mm x 610mm fixed with GI snap grid frame work of same size as GI tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25 mm at the perimeter, including 4mm GI adjustable suspender of required length, including Anodised aluminium snap grid frame work for false ceiling including dismantling of old ceiling complete all as specified and directed. |
| 108 | All as per item No 107 but except false ceiling board. |
| 109 | M&L 30mm thick Flush shutters, solid core construction, with block boards core and plywood face panels, commercial type on both sides complete all as specified and directed.(colour/ pattern to be approved by GE) |
| 110 | Taking down door shutters of any desc exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. |
| 111 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat rusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800N (face) & 900N (Edge) minimum compressive strength 50n/mm2 modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of bening termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of miniimum 14 microns thick of approved design pasted with lot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, complete all as specified and directed. |
| 112 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter (glazed or skelton) of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat rusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800N (face) & 900N (Edge) minimum compressive strength 50n/mm2 modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of miniimum 14 microns thick of approved design pasted with lot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, (incl wiremesh required) complete all as specified and directed. |
| 113 | M&L second class Hard Wood plain framed panelled shutter (factory made) of 35mm thick (two panel with lock rail & panel of 9 mm BWP commercial ply or 12mm veneered particle board with comm. Veneers on both sides) The size of rail & style as per IS-1003 (Part-I) kiln occasioned & chemically treated (thickness of shutter 35mm) complete all as specified and directed. |
| 114 | S&F 35mm thick IInd class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc without sash bars for securing glass ,gauge etc size of members of shutters as specified in SSR Part –I section 8 clause 8.24(a) complete all as specified and directed. |
| 115 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 116 | S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 117 | S&F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 118 | M&L plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate cast in situ in back fill of chowkhats and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 119 | S&F in repairs anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 120 | S&F Powder coated Anodised aluminium door shutters ( powder coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed. |
| 121 | S & F powder coated Aluminium sliding windows with frame/chowkath for three track with two glass shutters using 4 mm thick plain/ tinted glass and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sections , aluminium cleat, tracks, bearing, handle lock rubber beading, etc complete including taking down old window of any size complete all as specified and directed.Note:- Size of aluminum sections are as under :-(i) Three track top & vertical – Jindal main – 2010 Section No 20621.(ii) Three track bottom - Jindal main – 2010 Section No 20620.(iii) Shutter vertical section - Jindal main – 2010 Section No 20606.(iv) Shutter top & bottom - Jindal main – 2010 Section No 20604(v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605. |
| 122 | S&F in repairs 4mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane fixed with rubber gasket and aluminium powder coated snap beading etc. complete all as specified and directed. |
| 123 | S&F galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 124 | S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane hacking out old broken glass from wood or steel frame or frames of any description complete all as specified and directed. |
| 125 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. |
| 126 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed. |
| 127 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed. |
| 128 | M&L for Providing Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 129 | M&L for Providing Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 130 | M&L for at points of contact of wood work such as chowkath/frame by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 131 | M&L Chipping of unsound/weak concrete material from slabs, beams, columns, etc, with standard power driven percussion type or pneumatic chiesel of standard make as directed by Engineer-in-Charge including tampering all edges, making square shoulders of cavities etc incl scoffolding complete and disposal of debris upto 50m and complete all as specified and directed. |
| 132 | 25mm average thickness for slabs/chajja/ceiling |
| 133 | 50mm average thickness for beams/columns |
| 134 | M&L mixing and applying bonding coat,acrylic polymer modified cementitious bond coat @ 2.2 kg cement per sqm of surface area with specified proportion of polymer admixer ( rate shall include cost of cement), on prepared surface of parent materials as per specification and direction of GE complete all as specified and directed. |
| 135 | M&L for providing and mixing polymer modified cement mortar in layer, each layer not exceeding 10 mm thick, including trowelling with wooden tools etc, complete as per specification and direction of Engr-in- Charge. For payment purposes, pre-measurement of thickness shall be done just after the surface preparation is completed. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounf/tapping with a blunt metal instrument. complete all as specified and directed. |
| 136 | 25mm average thickness for slabs/chajja |
| 137 | 50mm average thickness for beams/columns |
| 138 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 139 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 140 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. |
| 141 | M&L for replacement with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new/Existing concealed PVC rigid conduit medium grade ISI marked including pressed steel with existing colour terminated boxes of Modular GI sheet Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and as directed for the following:- (a) Wiring shall be done by using proper colour coding(b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps complete all as specified and directed. |
| 142 | Description all as per serial item No 137 above but one 5/6 pin socket outlet, 5 amps on the same board complete all as specified and directed. |
| 143 | Description all as per serial item No 137 above but one 5/6 pin socket outlet, 5 amps, independent complete all as specified and directed. |
| 144 | Description all as per serial item No 137 above but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.Note:-Power circuit shall be done in separate circuit . |
| 145 | All as per the description of serial item no 137 above controlled by two 2-way switches, with cables 1.5sqmm size all as specified and directed. |
| 146 | M&L for replacement point wiring with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including Modular GI sheet Metal flush boxes of anyway (as per site requirement) for mounting switches, sockets, regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. |
| 147 | Description all as per serial item No 142 above but 6 Amp socket outlet on same board complete all as specified and directed. |
| 148 | Description all as per serial item No 142 above but socket outlet 6 Amps independent board complete all as specified and directed. |
| 149 | Description all as per serial item No 142 above but for one 6 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed. |
| 150 | All as per the description of serial item no 142 above controlled by two 2-way switches, with cables 1.5sqmm size all as specified and directed. |
| 151 | S&F Modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed. |
| 152 | S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. |
| 153 | S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 154 | S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 155 | S&F Modular Switch two way 6 Amp, one module 240 volts ISI marked complete all as specified and directed. |
| 156 | S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. |
| 157 | S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 158 | S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed. |
| 159 | S&F Modular white cover plate 8M complete all as specified and directed. |
| 160 | S&F Modular white cover plate 6M complete all as specified and directed. |
| 161 | S&F Modular white cover plate 3M complete all as specified and directed. |
| 162 | S&F Modular white cover plate 1M complete all as specified and directed. |
| 163 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, 4 Ft, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 164 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt, 6500K fitting, 2 Ft, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 165 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 5 watt, 6500K fitting, 1 Ft, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 166 | Supply and Fix in repair Recess mounted slim LED luminiare with drop down diffuser light 36W 230 volts AC corrosion resistent complete all as specified and directed. |
| 167 | S & F in repairs factory made DB SPN 8 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection, 240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash color/surfaces complete all as specified and directed.Note: Distribution board and MCB's should be same make. |
| 168 | S&F in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 169 | S &F in replacement of SPN 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 170 | M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit/surface casing capping fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.Note: Cutting chases on the wall whereever required is deemed to be included in unit rate quoted. |
| 171 | Disconnecting/ Taking down Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade oiling and greasing of bearing including refixing and making the connection and testing complete all as specified and directed. |
| 172 | Disconnecting/ Taking down ceiling fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade, oiling and greasing of bearing including refixing and making the conection and testing complete all as specified. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
