|
| 1 | Construction of Bhekda Guard Choki |
| 2 | Excavation work by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains not exceeding1.5 m in width or 10 sqm on plan including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock |
| 3 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) |
| 4 | Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Add extra over item no. 5.1 for Brick work in super structure upto third storey using brick of class designation 75 in .cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in .cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Random rubble dry stone Kharanja under floor. |
| 8 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinth Level:M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) |
| 9 | Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for:Suspended floors, roofs, landings, staircases, balconies,girders, cantilevers, bands, coping bed plates, anchor blocks,sills, chhajjas, lintel, beam, plinth beam etc. |
| 10 | providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering .M 20 grade mix |
| 11 | Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three levelThermo mechanically treated bars (IS:1786) |
| 12 | Supplying and fixing machine cut fine dressed Red/Pink sandstone dasa or coping, with full moulding if required laid oncement mortar 1:4 including pointing with admixture ofpigment matching with the stone shade.25 mm thick |
| 13 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 25mm thick. |
| 14 | Providing and fixing 1st quality MAT & GLOSSY finishedceramic tile confirming to IS : 13755 and IS : 15622 coloursuch as white, grey, ivory, fume red brown, light green, lightblue and other light shades in floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (including the cost of cement mortar bed 1:4).Size 300mm x 450mm |
| 15 | Providing and fixing 1st quality MAT finished ceremic tilesize 300x300mm confirming to IS : 13755 and IS : 15622colour such as white, grey, ivory, fume red brown, light green,light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointingin the white cement mixed with pigment to match the shade ofthe tile complete (including the cost of cement mortar bed |
| 16 | Polished Blue Kota stone flooring skirthing laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete .For area of each slab from 2001sqm to 5000 sqm |
| 17 | P/ F M.S. sheet Single leaf door shutter in angle iron frame 35X35X5 mm suitabilly daigonally bracked with 25X3 mm flat iron above and below lock rail of size 50X5 mm beading extra including all fitting as per direction of engineer-in- charge but excluding cpst of chowkhats inculding twocoats of anti-corrosive red oxide primer paints. M.S. Sheet 20 S.W.G. |
| 18 | Providing and fixing steel glazed doors windows andventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm.long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size) or with wooden plugs and screws or rawlplugs and screws with fixing clips or with bolts and nuts asrequired including providing and fixing of plain glass panes4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screwscomplete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. as required. |
| 19 | A. Window side Hung ( openable ) |
| 20 | B. Ventilators top Hung ( openable ) |
| 21 | Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance . |
| 22 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 23 | Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and weldedwith 15x3 mm lugs 10cm long embedded in cement concreteblocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as require including fixing of necessarybutt hinges and screws and applying a priming coat ofapproved steel primer |
| 24 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 20 mm thick |
| 25 | Finishing walls with Acrylic Smooth exterior paint of requiredshade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).New work ( three or more coats ) |
| 26 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including allscaffolding:Two or more coats on new work including prepration of base with primer Putty lippy complete in all respect. |
| 27 | Painting with emamel paint of approved brand and manufacture and to give an even shade . Two or more coats on New work |
| 28 | Filling available excavated earth ( excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead upto 50 mts and with all lift. |
| 29 | P & F European type white glazed vitreous china 1st qualityDouble syphonic W.C (IS :2556 Mark) with P or S trapincluding cutting and making good the wall and floor |
| 30 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm diaG.I. waste pipe, dome waste couplings, concealed ironbrackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm |
| 31 | P & F WVC Wash basin (Ist quality IS:2556 Mark) ofapproved make with C.I. brackets duly painted 1 No. 15 mmC.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, P.V.C Waste pipe with PVC nut32 mm complete including cutting & making good the wall Size 550 mm x 400 mm dia for counter top |
| 32 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicatingthe BIS license No), of approved make with cover, 25mm dia1M long G.I. over-flow pipe & 25 Cm. long wash out pipewith plug & socket, including making connection etc.,complete of approved design: |
| 33 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .)approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant. |
| 34 | A. 75 mm dia |
| 35 | B. 110 mm dia |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete asper direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) 15 mm nominal size |
| 37 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge Pillar Cock 15 mm nominal size |
| 38 | Concealed stop cock 15 mm nominal size |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes (IS 15778 : 2007 code) having thermal stability for hot& cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete asper direction of Engineer in Charge. (Concealed workincluding cutting chases and making good the walls etc.,) 25 mm nominal size |
| 40 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II )rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E- 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 41 | A. Short point (up to 3 mtr.) |
| 42 | B. Medium point (up to 6 mtr.) |
| 43 | C.Large point (up to 10 mtr.) Please Enable Macros to View BoQ information |
