|
| 1 | Scraping (a) White wash and colour wash. (CSR 8.31) (a) |
| 2 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR 16.65) |
| 3 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR 16.63) |
| 4 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(CSR 16.18) |
| 5 | Painting one coat with anticorrosive bitumastic paint on old work to give an even shade. (CSR 16.28) |
| 6 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43 litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm. (CSR 16.60) |
| 7 | Providing surface treatment to external / internal wall with water resistant grade, anti fungal, anti rusting, antifoaming, high percentage acrylic binder washable surface with two coats to be provided with spatula over one coat cement primer including preparation of surface with water resistant grade match colour complete as per specifications and to the entire satisfaction of engineer- in- charge. (CSR 16.68) |
| 8 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. (CSR 8.44) |
| 9 | Providing and Fixing ceiling at height upto 4 mtr consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. (CSR 13.65) |
| 10 | Spirit polishing two coats including a coat of wood filler on wood work. (CSR 16.45) |
| 11 | Renewing glass panes with wooden fillets wherever necessary (b) Glass panes weighing 10.75 Kg/sqm (CSR 31.6) (b) |
| 12 | Providing and applying texture paint on walls complete in all respects (NS) |
| 13 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) (i) Float glass panes of 5 mm thickness. (CSR 17.47) (i) |
| 14 | Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. (a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span (CSR 18.3) (a) |
| 15 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats (CSR17.45)(a) |
| 16 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerincharge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. (CSR 31.36) |
| 17 | Dholpur stone tiles 25 mm thick in wall facing ( lining ) laid in any pattern as specified on 12.5 mm thick cement sand plaster 1:3 and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing & polishing including labour for fixing cramps, pins & dowels etc.(CSR 14.109) |
| 18 | Rough red stone (From Agra) flooring 40mm thick, set in 12.5mm thick cement sand mortar 1:3 including jointing with cement mortar 1:2 with an admixture of pigment to match the shade of stone. (CSR 14.95) |
| 19 | Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead (a) With cement mortar 1:4 (1 cement:4 sand) Taking area 2.5 sqm. (CSR 31.1) (a) |
| 20 | Providing and fixing of cupboard made of 19mm thick commercial board finished with lamination from both sides (including partition and drawers) complete in all respect i/c necessary fittings. |
| 21 | Wire gauge Hollock wood door shutter without springs housed in chowkat (A) 35 mm thick. (CSR 17.11) (ii) (A) |
| 22 | Providing and laying Rectified Porcelain floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per Sqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc., complete(CSR 14.123) |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 kgf / cm²) conforming to IS : 4985, including fixing with MS clamps. (i) U-PVC pipes (working pressure 4 kgf. /sqcm) pipe 110 mm dia.(CSR 13.74)(a) (i) |
| 24 | Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-inCharge. (CSR 8.43) |
| 25 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks (Zig zag type) of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.) (CSR 14.138) |
| 26 | Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks (Zig zag type) of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.) (CSR 14.138) (Labour Rate) |
| 27 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (c) Decorative with teak facing on both sides edges lipped with teak with laminated core. (iv) 35mm thick. (CSR 17.27) (c) (iv) |
| 28 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm)(CSR 17.43)(c) |
| 29 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (CSR 17.22) (iv) Please Enable Macros to View BoQ information |
