|
| 1 | Providing and Laying WHITE GLAZED TILES 6mm IN FLOORING ,TREAD ,STEPS and LANDING LAID on a BED 12 mm THICK CEMENT MORTOR (1:3) FINISHED WITH FLUSHED POINTING IN WHITE CEMENT, within all leads and liftsas per the direction of Engineer-in -Charges. |
| 2 | PROVIDING and LAYING MARBLE WORK (TABLE RUBBED and POLISHED ) IN FLOORING 20 mm THICK BASE IN CEMENT MORTOR 1 : 3 (1 CEMENT : 3 SAND) I/C JOINTING WITH CM 1: 2 (1 WHITE CEMENT : 2 MARBLE DUST) WITH an ADMIXURE of PIGMENT TO MATCH THE SHADE OF THE MARBLE.within all leads and liftsas per the direction of Engineer-in -Charges. |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought ,framed and fixed in position with in all leads and lifts as per the direction of Engineer In Charge. |
| 4 | Painting two coats (excluding priming coat) on previously painted wood and wood based surfaces with readymixed flat oil paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter and sand papering and stopping within all leads and liftsas per the direction of Engineer-in -Charges. |
| 5 | Painting two coat over previously painted steel and other metal surface.Enamel paint other than white within all leads and liftsas per the direction of Engineer-in -Charges. |
| 6 | Distempring (two coat ) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even dshgade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing free from mortar dropping and forign matter and also including preparing the surface even and sand arpered smooth. |
| 7 | Providing and laying cement concrete work 1:3:6 (1 Cement, 3 sand ,6 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and rein forcement for reinforced concrete work in Walls i/c attached buttresses, pillasters and their caps & bases of string cources etc up to floor two level |
| 8 | Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead with necessary screws :40mm thick 2nd class Deodar wood complete excluding the cost of purlins refters and trusses.(0.63 mm thick sheet.) |
| 9 | Providing and fixing of Electricity fitting 200 W All-in-One Solar Street Light with Radar Sensor & Remote, 77SMD LEDs 15000mAh Bettery , Monocrystalline Solar Pane, IP65 Waterproof Die-Cat Aluminium Outdoor Lamp for Street & Parking = 3 Nos, Heter Belco = 3 Nos, LED 9 Watt =10 Nos, Wire 1.5 mm =90 Rmt Switch 5Amp =12 Nos, Socket 5 Amp=6 Nos as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 10 | Providing and fixing of Sanitary fitting GI Union 15mm =4 Nos,GI El Bow 15mm = 20 Nos, GI Tee 15mm=2 No, GI Tap 15mm = 10 Nos, Toilet seat 2 No, angle valve 6 Nos, waste pipe 3 Noa, CPVC pipe 20mm 20 nos, elbow 20mm 40 Nos, Tee 20mm 30 nos, Tee 20mmx15mm 8 nos, elbow 20mmx 15mm 30 nos, socket 20mm 20 nos, GI hook 40 nos, CPVC seal 4 gram, MTA 20x15mm 12 nos, FTA 20x 15mm 10nos, plug 15mm 30nos, over cross 4 nos, GI Nipple 12 Nos, Hexa Blade 2 Nos, angle cock jaquare 6 nos, consealed body jaquar 2 nos, urinal 1 nos, wash basin 1 no, single inner mixure 2 no, CP waste 2 nos, waste pipe 2 nos, mirror 6 nos, cocked upper part 2 nos, bib cock 4 nos,telcon tap 20 nos, stud 2 no, CP Cap 20 nos, external nipple 25mm 6 nos, PVC pipe 75mm 6kg, Floor trap 2*1/2\\"x4 = 4 nos, Tee 75mm 2 nos, Angle bolt 8 nos, Jali 2 nos Bath set 2 nos within all leads and liftsas per the direction of Engineer-in -Charges. |
| 11 | Providing and fixing 2mm thick interlock Wooden Pannelling with nickel plated piano hinges with screws etc. complete within all leads and liftsas per the direction of Engineer-in -Charges. |
| 12 | Polishing two coats (including priming coat,and rubbing )on wood based surfaces with readymixed flat oil paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter and sand papering and stopping within all leads and liftsas per the direction of Engineer-in -Charges. |
| 13 | Providing and fixing of Curtains as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 14 | Providing and fixing Sofa wooden Arms and back coushion five seater inclusive of alll taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 15 | Providing and fixing Dining Table Marble Top with six chairs inclusive of all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 16 | Providing and fixing LED Television inclusive of all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 17 | Providing and fixing King Size Bed 6\\"x6\\" with side table make indian Teak wood inclusive of all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 18 | Providing and Installing of Rugs in front of bed inclusive of all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 19 | Providing and fixing skirting with pre laminated medium density fibre board exterior grade ( grade-1) confirming to IS:145878:1998 marked , with ( one side decorative )and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00mm thick of screws including drilling holes for neccessary plugs complete in all respect ( 19mm thickness)within all leads and liftsas per the direction of Engineer-in -Charges. |
| 20 | Providing and fixing decorative high pressure laminated sheet of plain/woodgrain in gloss/matt/suede finish with high density protective surface layer and revers side of adhesive bonding quality confiriming to IS:2046 Type S, including cost of adhesive of approved quality in 1.00mm thickness.within all leads and liftsas per the direction of Engineer-in -Charges. |
| 21 | Providing and fixing Hydraulic Hinges for almirah as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 22 | Providing and fixing M.S. Handles 8\\" for almirah as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 23 | Providing and fixing M.S. Handles 4\\" for drawers as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 24 | Providing and fixing Magnet cut for Almirah as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 25 | Providing and fixing Locker for drawers as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. |
| 26 | Steel work welded in built up section, Trusses and Frames work i/c cutting ,Hosting, fixing in position & applying a priming coat of red lead painting,Rating, framed guard, bars, ladders, railing, bars, bracket & similar work within all leads and liftsas per the direction of Engineer-in -Charges. |
| 27 | Providing and fixing Tempered/Toughened Glass for window as per market Rate including all taxes within all leads and liftsas per the direction of Engineer-in -Charges. Please Enable Macros to View BoQ information |
