|
| 1 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 2 | M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. |
| 3 | M&L for rendering 15mm thick in CM 1:4 on brick/stone wall surfaces on other than fair faces of brick work finished even and smooth without using extra cement with/without water proofing compound (water proofing compound wherever added shall be measured & paid separately) complete all as specified & directed. |
| 4 | Supply only integral liquid water proofing compound (ISI marked). |
| 5 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. |
| 6 | M&L for preparation of new plastered surfaces of walls and applying Two coats of 1st Quality acrylic distemper of approved tint over 1mm thick wall care putty complete all as specified & directed by Engr-in-Charge. |
| 7 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion weather proof exterior paint of approved tint over a coat of primer complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of 1st Quality acrylic distemper of approved tint complete all as specified & directed by Engr-in-Charge. |
| 9 | M&L for preparation of old decorated surfaces of walls/ceiling including complete removal of existing treatment and then applying two coats of distempering with 1st quality acrylic distemper of approved manufacturer and of required shade & colour over 1mm thick wall care putty complete as per manufacturer's specification & as directed.Note : Scrapping of existing surface to be done by mechanical sander at any height including neccessary scaffolding. |
| 10 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge. |
| 11 | M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles. |
| 12 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but ot backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 13 | M&L for double charged/ultra charged vitrified ceramic tiles 8-10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile exceeding 0.42 sqm but n exc 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 14 | M&L for double charged/ultra charged vitrified ceramic tiles 8-10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed. |
| 15 | Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 16 | M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge. |
| 17 | M&L for M&L for Designer vitrified wall tiles of size 600 x 1200mm laid in required pattern on vertical surface set and jointed in 10 mm thick heavy duty, chemical resistant adhesive for fixing tiles on wall, laying plastic sheet cover on wall/ flooring and removing when directed. Note: Tiles shall be free from any variation in colour or texture. |
| 18 | M&L for Johonson Endura DG Flocept LT 300x300x10mm tile in floors etc set and joint in neat cement slurry top 2 to 3 mm layer of Fosroc Nitotile GPX polymer modified adhesive and pointed in coloured cement to match the shade of tile over & including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 19 | M&L for Glass mosiac tile (any colour/pattern as approved by Engr-in-Charge) fixed over 5mm thick 325 MYK Laticrete adhesive laid with 2 mm spacers and filling joints with MYK Laticrete Grout pressed with rubber trowel to remove excess grout with damp spongs and subsequently with dry rag complete.Note : Work to be carried out in patches |
| 20 | Dismantling stone slabs and tiles of any thickness laid bedded and pointed in any mortar, removing the rubbish off the premises of MOD land complete all as specified. |
| 21 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM 1:6 complete all as specified& directed by Engr-in-Charge. |
| 22 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 4 Sqm each, complete all as specified and as directed. |
| 23 | Taking down chowkhat or frame exceeding 1.5 Square Metre and not exceeding 4 Sqm each, complete all as specified and as directed. |
| 24 | Taking down shutter of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed. |
| 25 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 26 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. Please Enable Macros to View BoQ information |
| 27 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. Please Enable Macros to View BoQ information |
