Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF GODABARISH MISHRA ADARSH PRATHAMIK VIDYALAYA Govt.NHS,KUNDHEIGOLA AT KUNDHEIGOLA,REAMAL, DEOGARH, ODISHA (2ND CALL) CONSTRUCTION OF GODABARISH MISHRA ADARSH PRATHAMIK VIDYALAYA Govt.NHS,KUNDHEIGOLA AT KUNDHEIGOLA,REAMAL, DEOGARH, ODISHA (2ND CALL) NIT No: EPI/PCO/BBSR/1026/258 dated 18.06.2026 Sl. No. Description of Works Amount in Rs. GMPAV, REAMAL, DEOGARH |
| 2 | Civil Work |
| 3 | PH WORKS |
| 4 | ELECTRICAL WORKS TOTAL 50143736.14 Say 50143736.0 Rupees: Five Crore One Lakh Forty Three Thousand Seven Hundred & Thirty Six Only CONSTRUCTION OF GODABARISH MISHRA ADARSH PRATHAMIK VIDYALAYA Govt.NHS,KUNDHEIGOLA AT KUNDHEIGOLA,REAMAL, DEOGARH, ODISHA (2ND CALL) NIT No: EPI/PCO/BBSR/1026/258 dated 18.06.2026 Sl.No. Description of items Quantity Unit Rate(Rs) Amount(Rs) (i) CIVIL WORK |
| 5 | Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. Ground Floor 2645.49 Cum 99.5 263226.26 C.WALL 136.79 Cum 99.5 13610.61 |
| 6 | Filling the Plinth with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. Ground Floor 881.83 Cum 173.1 152644.77 |
| 7 | Filling the Foundation, Sides of Foundation, etc. in mechanical means with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of machinary, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. Ground Floor 1763.66 Cum 99.5 175484.17 C.WALL 91.19 Cum 99.5 9073.41 |
| 8 | Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre/Post-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. Ground Floor 1818.06 sqm 104.5 189987.27 |
| 9 | Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge. Ground Floor 177.27 Cum 588.0 104234.76 C.WALL 6.62 Cum 588.0 3892.56 |
| 10 | Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. Ground Floor 428.91 Cum 6811.6 2921563.36 C.WALL 11.63 Cum 6811.6 79218.91 RCC WORK |
| 11 | Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. (A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc. Ground Floor 343.45 Cum 7595.3 2608605.79 C.WALL 9.0 Cum 7595.3 68357.7 R.C.C. Plinth Beam Ground Floor 135.85 Cum 8469.7 1150608.75 C.WALL 5.63 Cum 8469.7 47684.41 (B)R.C.C. Column &cRoof Beam Ground Floor 269.33 Cum 16978.1 4572711.67 C.WALL 3.09 Cum 16978.1 52462.33 Terrace 34.4 Cum 19054.4 655471.36 (C) R.C.C. Slab Ground Floor 242.35 Cum 13374.1 3241213.14 C.WALL 0.42 Cum 13374.1 5617.12 Terrace 13.65 Cum 14729.7 201060.41 (D)R.C.C. Staircase Ground Floor 10.09 Cum 16840.3 169918.63 (E)R.C.C. lintel Ground Floor 33.16 Cum 15309.0 507646.44 Terrace 0.97 Cum 17051.6 16540.05 (F)R.C.C. Fins Ground Floor 17.02 Cum 12658.3 215444.27 |
| 12 | Providing & fixing TOR Fe-500D HYSD Reinforcement bars of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment). Ground Floor 977.97 Qntl 9554.3 9343818.77 C.WALL 22.54 Qntl 9554.3 215353.92 Terrace 76.47 Qntl 9588.43 733227.24 BRICK WORK |
| 13 | Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. Ground Floor 194.5 Cum 5659.4 1100753.3 C.WALL 17.34 Cum 5659.4 98134.0 |
| 14 | Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. ( Excluding Cost Of Steel Reinforcement ). Ground Floor 34.41 Cum 5915.2 203542.03 |
| 15 | Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. Ground Floor 453.25 Cum 5692.8 2580261.6 C.WALL 25.88 Cum 5692.8 147329.66 Terrace 158.97 Cum 6078.7 966330.94 FINISHING WORK |
| 16 | Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge Ground Floor 83.59 Sqm 219.4 18339.65 C.WALL 64.71 Sqm 219.4 14197.37 |
| 17 | Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. Ground Floor 2147.18 Sqm 211.5 454128.57 C.WALL 3209.45 Sqm 216.2 693883.09 |
| 18 | Providing 16mm thick cement plaster in cement mortar (1:6) to the surfaces of brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.(inner side) Ground Floor 3559.07 Sqm 286.0 1017894.02 C.WALL 202.5 Sqm 286.0 57915.0 C.WALL 170.16 Sqm 293.2 49890.91 |
| 19 | Waterproofing application:- Providing and application of two component polymer odified flexible cementitious waterproofing coating at a thickness of 1.5-2.5 mm The membrane hould have Elongation equal or more than: 30% etc.as per direction of E.I.C (For longer span, in errace panel of 4m*4m should be done by roovecutting, and filling with PU Sealant)Crack Bridging ability: Up to 1 mmAdhesive strength: 1.0 N/mm² @ 28dTensile elongation: 60% @ 20°CShore A Hardness >85 (between 3-7 days) Terrace 1874.36 Sqm 490.0 918436.4 FINISHING WORK |
| 20 | Supplying and finishing the plastered surface of wall using 2 Coats of Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. Interior Wall Putty Ground Floor 5096.62 Sqm 64.5 328731.99 C.WALL 170.16 Sqm 66.4 11298.62 |
| 21 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance,royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) Ground Floor 5168.33 Sqm 194.1 1003172.85 First Floor 267.94 Sqm 198.4 53159.3 |
| 22 | Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete. Ground Floor 2446.95 Sqm 186.2 455622.09 TERRACE 267.21 Sqm 186.2 49754.5 First Floor 1350.36 Sqm 193.3 261024.59 |
| 23 | Painting two coats of synthetic enamel paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use) Ground Floor 201.09 Sqm 268.8 54052.99 C.WALL 44.41 Sqm 268.8 11937.41 First Floor 25.62 Sqm 273.7 7012.19 |
| 24 | Providing and laying of 600 mm x 600 mm Vitrified Floor Tiles Matt Finish Anti Skid Plain Series confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 775.1 Sqm 1153.5 894077.85 |
| 25 | Providing and laying of Vitrified Tiles Matt Finish Plain Series in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 600mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 73.8 Sqm 1288.0 95054.4 |
| 26 | Providing and laying 300mmx300mm antiskid ceramic floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 82.32 Sqm 1107.2 91144.7 |
| 27 | Ceramic wall tile With Epoxy Grout For ToiletProviding and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 300mm x 450mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and spacer of 4mm for grouting the joints of tiles using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 318.76 Sqm 1235.1 393700.48 |
| 28 | Providing & laying Heavy Duty Vetrified Floor Tile Matt Finish Rustic Series having thickness 10mm confirming to IS 4457 of size 600mmx600mm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 662.15 Sqm 1244.5 824045.68 |
| 29 | Providing & laying Heavy Duty Vetrified Tile Matt Finish Rustic Series having thickness 10mm in dado/skirting confirming to IS : 15622 of size 600mmx600mm of approved make, quality and colour without any warpage laid over an under layer of 12mm thick cement mortar (1:3) (1 cement: 3 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 75.83 Sqm 1379.3 104592.32 |
| 30 | Providing and laying 300mm x 300mm Chequred Tiles. tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use.) Ground Floor 136.51 Sqm 693.1 94615.08 |
| 31 | Providing & laying granite stone flooring in Floors and landing using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of granite tiles shall be approved before procurement and use.) Ground Floor 9.45 Sqm 3155.6 29820.42 BUILT IN JOINERIES |
| 32 | Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Ground Floor 99.75 Rmt 1185.4 118243.65 |
| 33 | 23 Ground Floor 139.28 Sqm 5236.5 729339.72 |
| 34 | Supplying and fixing of Powder coated 50-60 microns approved colour of aluminium 40mm Casement series Door Unit with suitable aluminium extrude profiles. the system is designed to accommodate 12mm clear toughened glass. the rate quoted inclusive of hardwares like antilift, roller, Espag lock cum handle, epdm gaskets, T mullion, Fly Mullion, bottom adopter, mid transom, glazing clip for 12 mm glass felt along with all accessories etc complete. The gap between the wall and window will be filled with silicon weather sealant in the outer side. including the cost of all materials ,hardware fittings,cost of all labour, conveyance, loading, un loading, T&P, etc, complete as per the direction of Engineer-in Charge.(As per Proceeding of C.C.E. Level committee meeting held on dt. 12.02.2024 at 11.30 A.M.) Ground Floor 4.32 Sqm 12427.8 53688.1 |
| 35 | Supplying, fitting and fixing of M.S. grill ,Grated doors etc made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb with cost, conveyance, Materials, labour, T&P etc. required for the complete in all respect as per the direction of Engineer-in-Charge. Ground Floor 8202.65 Kg 99.51 816245.7 C.WALL 3683.16 Kg 99.51 366511.25 Terrace 946.8 Kg 99.51 94216.07 |
| 36 | Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge. Ground Floor 468.01 Kg 343.8 160901.84 |
| 37 | Supplying , fitting and fixing of two track UPVC sliding windowof approved make with 6mm thick glass of approved qualitycomplete with frame, shutters and all fitting and fixtures. Ground Floor 147.15 Sqm 4960.97 730006.74 |
| 38 | Providing and fixing barbed wire fencing on R.C.C. (1:2:4) fencing posts with chips 1.68M long 13cm x 13cm at bottom and 8cm x 8cm at top and 30cm 30cm x 8 cm base finished smooth by means of staples and staining hooks by means of tying with G.I wire and including cost of barbed wire, staples, hooks, tying wires and labour, post etc complete in all respect as per the direction of the Engineer-in-charge. Length of Barbed Fencing 300.0 Rmt 950.62 285186.0 |
| 39 | Supplying, Providing and installing of modified flexible polyolefin (FPO) memebrane system ( Water Proofing tape) which shall be designed to be bonded over expansion and movement joints upto 200 mm in structures to prevent the passage of water having elongation at break more than 600%, maximum permissible permanent elongation shall not less than 20% and having registance to agrresive conditions like ground water, soil, cement water, bitumen and bitumen emulsion coatings .It is bonded in position using two part epoxy adhesive and consuption of adhesive shall be as per manufacturers direction after proper fixing of the necessary back upmaterials as specified and directed by the EIC.The item rate shall be including all materials, all kinds of labours, T & P, machinaries, lead and lift, mathadi Charges, curing, wastages,consumebles, cleaning, shifting of debris outside the premises, surface preparation etc complete as per design, drawing & direction of EIC. Ground Floor 154.0 Rmt 2676.1 412119.4 |
| 40 | Providing and fixing of expansion joint system (150 mm-200 mm wide) related with wall/soffit/ceiling joint(internal/external) location as per drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members,aligning / centering arrangement and support plates as per ASTM B221- selfCharge.02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application,as well as horizontal covers for Soffits/ Ceilings both new and existing construction in Buildings/complexes/Structures with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063). The design Ground Floor 10.5 Rmt 5305.65 55709.33 |
| 41 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild stee Ground Floor 21.6 Sqm 4960.97 107156.95 TERRACE 16.8 Sqm 4960.97 83344.3 Total Civil Works 44815201.0 A INTERNAL P.H. & SANITARY WORK |
| 42 | Providing and fixing Clorinated Polyvinyl Chloride [CPVC] pipes SDR-11 conforming to IS:15778, having thermal stablity for hot & cold water supply , including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes and fittings with one stp CPVC solvent cement and testing of joints complete as per specification and direction of Enfineer-in-charge. 20 mm PVC sch-80 pipes 70.0 Mtr 307.6 21532.0 25 mm PVC sch-80 pipes 70.0 Mtr 426.8 29876.0 32 mm PVC sch-80 pipes 100.0 Mtr 587.2 58720.0 50 mm PVC sch-80 pipes 120.0 Mtr 1201.5 144180.0 |
| 43 | Supplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification. 250mm Thick 38.0 Each 67.8 2576.4 |
| 44 | Supplying all materials,labour and T&P for cutting holes in R.C.C. floors and roofs up to 19 cm. thick including for passing GI / PVC pipes and fittings etc. and repairing the holes after insertion of pipes etc. with cement concrete 1:2:4 including finishing complete to make it leak proof leak to the damages all complete as per specification and direction of the Engineer-in-charge. 7.0 Each 221.2 1548.4 |
| 45 | Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification. 70.0 Mtr 297.6 20832.0 |
| 46 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. a) Supplying all labour and T&P for fixing 2 in 1 bib cock of the following size as per specification all complete. 16.0 Each 1308.3 20932.8 b) Supplying all labour and T&P for fixing long body bib cock of the following size as per specification all complete.15mm Dia 4.0 Each 1078.2 4312.8 c) Supplying all labour and T&P for fixing CP Angular stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete. 15mm Dia 28.0 Each 937.6 26252.8 d) Supplying fitting fixing of C.P Pillar Taps highpressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification. 15mm Dia 17.0 Each 1475.0 25075.0 e) Supplying all labour and T&P for fixing CP short body Bib cock [taps] polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete . 3.0 Each 915.5 2746.5 f) Supplying all labour and T&P for fixing U.P.V.C Ball valve [ horizontal plungr type] confirming to IS:1703-1977 of the following nominal sizes as per specification all complete. ) 25mm Dia 6.0 Each 687.1 4122.6 g) Supplying all labour and T&P for fixing U.P.V.C Ball valve [ horizontal plungr type] confirming to IS:1703-1977 of the following nominal sizes as per specification all complete. 32mm Dia 4.0 Each 1421.6 5686.4 h) Supplying all labour and T&P for fixing U.P.V.C Ball valve [ horizontal plungr type] confirming to IS:1703-1977 of the following nominal sizes as per specification all complete. 50mm Dia 2.0 Each 3125.1 6250.2 i) Providing and fixing C.P. Brass Extension Nipple 1 inch with extension piece as per direction of Engineer-in-charge. 15.0 Each 594.39 8915.85 j) Supplying fitting fixing of CP waste of the following noninal diameter for wash hand basin and sink as per specification. 14.0 Each 380.1 5321.4 k) Supplying all materials,labour and T&P for fixing CP Gratings of the following nominal diameter of outlet, of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting and making good to the walls and floors etc. all complete as per specification. 38.0 Each 1190.4 45235.2 l) Providing and fixing of approved make and model for Chrome plated Grab Bar,for Physically challenged toilet, The work shall include the cutting of walls or floors & making good, complete as per direction of Engineer in Charge. 1.0 Each 4387.44 4387.44 |
| 47 | Supplying fitting fixing of C.P health facuet high pressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification. 15mm dia CP Health Faucet of 1mtr long PVC tube 8.0 Each 809.8 6478.4 |
| 48 | Providing and fixing of Rational moulded polyethylene cylendrical vertical water storate tanks confirming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and proviidng extra sockets and jam nuts , fixing ball volve ete. including hoisting up to a hite of 5.00metes above ground level and placing the tank to the required position etc. all complete as per specification and direction of the engineer-in-charge. i) Overhead water storage tanks 8000.0 Lit. 13.59 108720.0 Extra over item no.3.1.8 for hoisting Rational moulded polyethylene cylendrical vertical water storage tanks of following sizes for every additional height of 5.00m. Or part thereof complete as per specification and direction of the engineer-in-charge. Water storage tanks 4.0 Each 1248.0 4992.0 |
| 49 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. 110mm diameter PVC SWR pipes 105.0 Mtr 391.3 41086.5 75mm diameter PVC SWR pipes 90.0 Mtr 242.9 21861.0 110mm PVC door Tee 12.0 Each 388.6 4663.2 75mm PVC door Tee 5.0 Each 293.0 1465.0 110mm PVC offset 10.0 Each 138.0 1380.0 110mm PVC door bend 10.0 Each 216.4 2164.0 75mm PVC door bend 10.0 Each 114.1 1141.0 110mm PVC plain shoe bend 10.0 Each 170.8 1708.0 75mm PVC plain shoe bend 10.0 Each 83.2 832.0 110mm PVC vent cowl 10.0 Each 86.6 866.0 75mm PVC vent cowl 0.0 Each 73.0 110mm S-trap 12.0 Each 629.7 7556.4 110mm P-trap 1.0 Each 348.2 348.2 110mm SWR Pipe Clip 105.0 Each 30.4 3192.0 75mm SWR Pipe Clip 90.0 Each 23.4 2106.0 110/75 mm Dia Reducer/Connector 5.0 Each 258.5 1292.5 90mm Nahani Trap 33.0 Each 145.6 4804.8 |
| 50 | Supplying all materials,labour and T&P for fixing of PVC 10 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification. 10 Liters capacity PVC cistern 16.0 Each 1954.3 31268.8 |
| 51 | Supplying all materials,labour and T&P for fixing water closet ,squatting pan(Indian type.W.C.pan or Orissa pan) confirming to IS 2556 : Part-3-2004 duly embedded in cement concrete (1:4:8) using 40mm.nominal size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specificationand directon of theEngineer - in - charge. 8.0 Each 3837.7 30701.6 |
| 52 | Supplying all materials,labour and Supplying all materials,labour and T&P for fixing in cement mortar (1:3) a pair of white vitereous china (250x130x30mm.) foot rest for squatting water closet. etc. all complete as per specificationand direction of the Engineer-in-charge. 8.0 Pair 560.9 4487.2 |
| 53 | Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. 7.0 Each 3175.6 22229.2 |
| 54 | Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. 7.0 Each 923.4 6463.8 |
| 55 | Supplying all materials,labour and T&P for fixing wash hand basin (SS Made) with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification. 12.0 Each 4599.3 55191.6 |
| 56 | Supplying all materials,labour and T&P for fixing corner wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification. 4.0 Each 2666.6 10666.4 |
| 57 | Supplying all materials,labour and T&P for fixing Pedestal for wash hand basin complete recessed at the back for the receiptionof pipe and fittings etc. all complete as per specification including cost of pedestal for wash basin 4.0 Each 2621.9 10487.6 |
| 58 | Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification . 600mmx450mm size B.E.mirror 12.0 Each 2167.7 26012.4 |
| 59 | Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification. 13.0 Each 801.7 10422.1 |
| 60 | Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed with chromium plated brass brackets fixed to wooden plugs with cromium plated brass screws complete as per specification. 8.0 Each 1080.1 8640.8 |
| 61 | Supplying all materials,labour and T&P for fixing of cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws as per specification. 16.0 Each 354.4 5670.4 |
| 62 | Supplying all materials,labour and T&P for fixing standard size C. P. towel ring fixed fixed to wooden plugs with cromium plated brass screws complete as per specification. |
| 63 | Supplying all materials,labour and T&P for fixing of liquid soap container - glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws as per specification. |
| 64 | Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories. 2.0 Nos 6159.2 12318.4 |
| 65 | Supplying fitting fixing of cromium plated CP over head shower rose with arm including polishing and complete as per specification and direction of the Engineer in charge. |
| 66 | Supplying all labour and T&P for fixing CP Concealed stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete. 0.0 |
| 67 | Supplying all materials,labour and T&P for fixing Porcelain Urinal respectively with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification. |
| 68 | Supplying all materials,labour and T&P for fixing Drinking Water Purifier Stall Type etc. all complete as per specification. |
| 69 | Fixing standard size Chromium Plated brass or glazed porcelain Toilet paper holder fixed to woden plugs with Chromium Plated brass screws complete as per specification and direction of the Engineer in charge. |
| 70 | Providing and fixing approved quality E.W.C Matrix Set with grab bar set for Handicap (Accessible) Toilet consisting of stainless steel grab bars and support fittings required for differently-abled users, conforming to universal accessibility standards. The set shall include wall-mounted horizontal and vertical support bars near WC and wash basin area, made of SS 304 grade stainless steel with satin/matt finish, complete with necessary brackets, anchor fasteners, screws, bends, end caps, and accessories. The arrangement shall provide safe support and ease of movement for wheelchair users and physically challenged persons. Installation shall be done in proper alignment, level, and position as per approved drawings and accessibility guidelines, complete in all respects as per the direction of the Engineer in charge. Total Internal P.H. Work 1057470.09 B EXTERNAL P.H. & SANITARY WORK |
| 71 | Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge. 250mmx250mm with RCC cover 10.0 Each 1736.0 17360.0 |
| 72 | Constructing inspection chamber with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. Inspection Chamber inside size 750mm x 750mm and 450mm 8.0 Each 14008.6 112068.8 |
| 73 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes. a) 110 mm dia U-PVC pipes Class-3 60.0 mtr 1079.9 64794.0 b) 160 mm dia U-PVC pipes Class-3 30.0 mtr 2336.9 70107.0 |
| 74 | Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. a) Plain Manholes inside size 900mm x 800mm and 450mm deep 8.0 each 18768.2 150145.6 |
| 75 | Construction of 50 Users Septic Tank (2 No.s) a)-i Sqm 56.88 Cum 311.5 17718.12 a)-ii Above 1.5mt. Depth 47.568 Cum 334.0 15887.71 b) Sqm 70.711296 Cum 173.1 12240.13 c) Sqm 2.958 Cum 588.0 1739.3 d) Sqm 2.958 Cum 6425.1 19005.45 e) Sqm 3.924 Cum 6811.6 26728.72 f) Rmt 15.84 Sqm 219.5 3476.88 g) Sqm i. Base 5.466 Cum 7595.3 41515.91 ii. Slab 4.644 Cum 13374.1 62109.32 iii. Wall 21.333 Cum 12658.3 270039.51 h) Sqm 42.44805 Qtl. 9554.3 405561.4 i) Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. 4.0 Each 160.1 640.4 j) Supplying all materials, labour, T&P and laying in trenches ( to level or slope ) and jointing with provision of stiff mixture of cement mortar in proportion of 1:1 for salt glazed stoneware pipes, Grade—A of the following internal diameters including testing of pipes and joints complete. 110mm diameter UPC pipe 12.0 Mtr 1079.9 12958.8 |
| 76 | Constructing RCC soak way pit with R.C.C top slab in (1:2:4) mix, inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, complete as per specification. a) RCC soak way pit of size 1.5m x 1.8m deep 8.0 each 10426.7 83413.6 Borewell |
| 77 | Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89 a One no. 3 phase 2 H.P 3 stage head range 30 to 54 mtr. Discharge 155 to 200 LMP with outlate dia 32mm. 1.0 Set 19850.0 19850.0 b 2.5 Sq mm cable. 70.0 Mtr 154.0 10780.0 c 40mm dia steel short piece. 2.0 Each 202.0 404.0 d Steel rope wit cover. 70.0 Mtr 35.4 2478.0 e Well Cap. 1.0 Each 202.0 202.0 f 50mm size CI bracket. 1.0 Each 121.2 121.2 g 20mm dia rigid HDPE pipes. 70.0 Mtr 99.8 6986.0 h Boring up to 30 mtr. 30.0 Mtr 890.3 26709.0 i Boring work Above 30 mtr. 50.0 Mtr 890.3 44515.0 j 8'' ASTM pipe SCH-80 70.0 Mtr 2290.46 160332.2 k Delivery 1.0 Set 2000.0 2000.0 l Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site. 70.0 Mtr 125.0 8750.0 Total External PH Work 1670638.05 TOTAL PH WORKS 2728108.14 INTERNAL WIRING |
| 78 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Group C 150.0 Nos. 1269.0 190350.0 |
| 79 | Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge.Average Length: 3 mtr |
| 80 | Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. Group c |
| 81 | Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge.Group C . |
| 82 | Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge. |
| 83 | Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.Group C |
| 84 | Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 85 | Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 86 | Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge. |
| 87 | Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge.Group C |
| 88 | Call bell point |
| 89 | Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. SUB TOTAL 474074.0 SUBMAIN |
| 90 | Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 91 | Recessed wiring to submain in 4 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 92 | Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 93 | Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 94 | Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. |
| 95 | Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. SUB TOTAL 614735.0 |
| 96 | DB Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions. a) Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For PDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP MCB (10KA) Outgoings-10/20A SP MCB 10KA-12Nos. 3.0 Nos. 14143.0 42429.0 b) Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A FP MCB (10KA) Outgoings-10A SP MCB 10KA-12Nos. 3.0 Nos. 14143.0 42429.0 c) Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For UPS DB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A FP MCB (10KA) Outgoings-10A SP MCB 10KA-12Nos. 3.0 Nos. 14143.0 42429.0 SUB TOTAL 127287.0 CABLE |
| 97 | Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 150 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required. |
| 98 | Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 95 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required. |
| 99 | Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required. SUB TOTAL 467260.0 END TERMINATION Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. |
| 100 | 3.5C x 150 sq.mm |
| 101 | 3.5C x 95 sq.mm |
| 102 | 4C x 16 sq.mm SUB TOTAL 5100.0 PANEL Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete. |
| 103 | MAIN PANEL with 150A 4P MCCB 36KA -1 No as incomer, 63A 4P MCB 10KA 4Nos,100A 4P Change over Switch 1Nos, 40A 4P MCB 10KA.-9Nos, 32A DP MCB 10KA-3Nos with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB. SUB TOTAL 162292.0 EARTHING |
| 104 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. |
| 105 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
| 106 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required. |
| 107 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required. SUB TOTAL 109563.0 FIXTURE Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 108 | Ceiling mounted indoor type batten type LED Luminaire with LED Lamp |
| 109 | Ceiling/ Wall mounted type BULK HEAD Luminaire |
| 110 | Supply, Installation, testing and commissioning of 10W Mirror Light |
| 111 | Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.BLDC 5 Star |
| 112 | Supply, Installation, testing and commissioning of exhaust fan of 250 mm PLASTIC Exhaust Fan (Vntilation Fan) complete, connection, etc as required.250MM CRISP AIR EXH FAN. |
| 113 | Supply & fixing of 18W LED Down Light (S/R) with all accessories. |
| 114 | Supply & fixing of LED 36w 2'x2' Surface/Recessed Mounted Light as required . |
| 115 | Supply & fixing of 6W LED Down Light (S/R) with all accessories. |
| 116 | Supply, Installation, testing and commissioning of wall fan of 400 mm sweep as required.Model-400mm STRIKER HI SPEED. SUB TOTAL 466236.0 PERFORATED CABLE TRAY Supply and installation of Pregalvanised Perforated type cable trays without cover. The rate shall include bends, Tees, all supporting brackets, anchor fasteners, screws, bolts, nuts etc., including painting of cable trays. Thickness of sheet steel shall be 2 mm. Support sizes similar to ladder type trays. |
| 117 | Size of Cable Tray :300 mm x 50 mm |
| 118 | Size of Cable Tray :150 mm x 50 mm SUB TOTAL 31930.0 TV /TEL & DATA |
| 119 | Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge. |
| 120 | Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge. |
| 121 | Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required. |
| 122 | Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge. |
| 123 | Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. 20mm 250.0 Rmt 103.0 25750.0 |
| 124 | Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.( Tel junction Box) |
| 125 | Supplying & Commissioning of Telephone Hand Set. |
| 126 | Supplying & installation of 100 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages. |
| 127 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. |
| 128 | Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box. SUB TOTAL 141950.0 TOTAL ELECTRICAL 2600427.0 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
