|
| 1 | Attending of day to day electrical complaints pertaining to internal electrification received through telephone or in person or online on detailment at MES Service centre located at NAMS Area by locating and rectification of fault from and including electric meter/DB onwards in respect of sub main/point wiring including provisioning of small pieces of electric cable of size 1.5/2.5 Sqmm to 10 Sqmm single core copper conductor and length not increasing 0.50 mtrs and carrying out repairs to the extent of tightening of loose connections, disconnection and dismantling of faulty wires, battens, conduits, boxes including providing necessary screws / nuts / bolts / nails for the rectification of defect and refixing of existing dismantled serviceable items complete all as specified and directed. Note - (i) If complaint warrants replacement of material as catered in BOQ here-in-after shall be paid under relevent item and no measurement shall be done under this item. Rate of attending complaint shall be considered to be quoted in the respective item. (ii) Complaint pertaining to location and rectification of fault in more than one length of point wiring/sub main wiring/DB's/ fitting or fixtures etc shall be considered as an independent complaint. Similarly complaint pertaining to replacement of two fixtures in one Qtr will also be measured and paid as one complaint. |
| 2 | (iii) In case a Qtr/room is found locked when tradesman is detailed to attend the complaint, the complaint shall be treated as one till its completion.(iv) Necessary tools for tradesman shall be provided by the contractor.(v) Transportation for tradesman and normal stores required for complaints shall be arranged by the contractor.(vi) Complaints of normal nature shall be attended and rectified within 8Hrs of receipt of complaint. However, complaints of emergent nature i.e no light, short circuit, earth fault etc shall be attended immediately on receipt of complaint round the clock. (vii) Bldgs requiring rewiring of small qty of point wiring if ordered will be measured and paid separately under respective items below. (viii) Conttractor or his rep will report to AGE EM complaint cell at 9 O'Clock daily for collecting of complaints. Complaint received will be done in the same day and after completion of complaint he will report to complaint cell to submit the complaint slip duly signed by the user.done on Holidays/ Sunday. (ix) For Non attending of complaint within above mentioned time a penalty of Rs 50.00/per day/per complaint will be levied on contractor.This penality shall also be applicable to all the items mentioned in BOQ here-in-after. |
| 3 | Supply and fixing in replacement switch piano flush type 5 Amps One-way, AC 230V on existing switch board all as specified and as directed. |
| 4 | Supply and fixing in replacement of switch piano flush type 16 Amps single pole one-way, 230V complete all as specified and as directed. |
| 5 | Supply and fixing in replacement switch piano type two ways AC 230 volts 6 Amps as per on existing switch board . |
| 6 | Supply and fixing in replacement socket out let 2-in-1, 3 Pin 6 Amps flush type 230 volts complete all as specified and as directed. |
| 7 | Supply and fixing in replacement socket outlet, flush type, 2-in-1, 3 pins, 6 & 16 Amps multipurpose complete all as specified and as directed. |
| 8 | Supply and fixing in replacement bell push switch piano, flush type, 5 Amps complete all as specified and as directed. |
| 9 | Supply and fixing in replacement of bell ding-dong 230 volts, single phase complete all as specified and as directed. |
| 10 | Supply and fixing in replacement of ceiling rose 65x50mm two to three terminals AC 230 volts complete all as specified and directed of any make/model as per in existing building. |
| 11 | Supply and fixing in replacement batten type angular/ Batten lamp holder insulated body with back plate suitable for batten fitting including PVC round block complete all as specifed and as directed. |
| 12 | Supply and fixing in replacement MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed. |
| 13 | Supply and fixing in replacement MCBs single pole and neutral (SPN) 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified and directed. |
| 14 | Supply and fixing in replacement MCBs single pole (SP) 40 Amps with 10 KA breaking capacity of 'B' series in distribution boards all as specified and directed. |
| 15 | Supply and fixing in replacement MCBs single pole and neutral (SPN) 40 to 63 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified and directed. |
| 16 | Supply and fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed. |
| 17 | Supply and fixing in replacement plug top 3 pin, 5 Amps complete all as specified and as directed. |
| 18 | Supply and fixing in replacement plug top 3 pin, 15 Amps complete all as specified and as directed. |
| 19 | Supply and fixing in replacement LED Tube rod with polycarbonate diffuser 4 feet long of capacity 20 watts complete with all accessories all as specified & directed by Engr-in-Charge. |
| 20 | Supply and fixing in replacement of LED 12 Watt Square/round shape surface mounted LED Panel down light of size as per site requirement complete all as specified and directed. |
| 21 | Supply and fixing in replacement LED bulk head light fittings including led lamp 10 watt as per IP65 and making necessary connections complete all as specified |
| 22 | Supply and fixing in replacement LED slim panel recess/surface/suspended mounting LED slim ceiling light 2'x2' with extruded aluminium housing and milky diffuser, suitable for recess mounted size 595x595mm complete with LED tube. |
| 23 | Supply and fixing in replacement of 6 Watt Round/square recess mounted down light separate replaceable electronic driver celling cut out dia as per existing shaped polycarbonate fixture complete all as specified and directed, |
| 24 | Supply and fixing in replacement of 15 Watt Square/round recess mounted down light separate replaceable electronic driver celling cut out as per existing square shaped polycarbonate fixture complete all as specified and directed, |
| 25 | Supply and fixing in replacement of 18 watt Square recess mounted down light separate replaceable electronic driver celling cut out dia as per exising size/round or square shaped polycarbonate fixture complete all as specified and directed, |
| 26 | Supply and fixing in replacemnt box type PVC rectangular block for mounting switches, sockets, fan regulator of size 175 x 100 x 50 mm surface mounting including necessary gitti for fixing complete all as specified and as directed. |
| 27 | Supply and fixing in replacement of frame plate with cover for modular switch 3/4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 28 | Supply and fixing in replacement of frame plate with cover for modular switch 6/8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 29 | Supply and fixing in replacement ceiling fan regulator, electronic Socket type, single phase, 230 volts complete all as specified and as directed. |
| 30 | Supply and fixing in replacement ceiling fan regulator, electronic switch type, single phase, 230 volts complete all as specified and as directed. |
| 31 | Supply and fixing in replacement MS machine screw 25 mm long suitable for fixing bakelite hylam sheets / square blocks complete all as specified and directed . |
| 32 | Supply and fixing in replacement MS Housing box for PT Switch as per site requirment as per existing including taking out old UNSV switch box and making good to the disturb surface by pcc complete all as specified and as directed. |
| 33 | Supply and fixing in replacement of MCCB 100 amps 4 pole, AC 415 volts 16 KA, including making connections with suitable size of aluminium lugs of any make /Model as per Existing MCCB Fitted in DB. complete all as specified and directed. |
| 34 | Supply and fixing in replacement of modular switch 6 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed |
| 35 | Supply and fixing in replacement of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed |
| 36 | Supply and fixing in replacement of modular socket, 5/6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed. |
| 37 | Supply and fixing in replacement of modular socket, 15/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed . |
| 38 | Supply and fixing in replacement of modular fan regulator 120 W , 2 Module , 230 volts AC as per existing model/make complete all as specified and as directed . |
| 39 | Supply and fixing in replacement of capacitor AC 230 volts 2.25 microfarads complete all as specified and as directed, |
| 40 | Supply and fixing in replacement of capacitor AC 230 volts 3.15 microfarads complete all as specified and as directed. |
| 41 | Supply and fixing in replacement of 3 mm thick hylam sheet of any size including screws and washers etc as per required at site complete all as specified and as directed. |
| 42 | Supply and fixing in replacement moduler bell push switch piano, flush type, 6 Amps complete all as specified and as directed. |
| 43 | Supply and fixing in replacement LED tube light fitting. ,1 x 20 W, 230 V Energy efficient T8, Box type made of CRCA shee heavy duty industrial type housing with reflector cover channel, bipin holders, connector block, etc. complete with tube rod LED 18/20 watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 44 | Supply and fixing in replacement Batten Series, LED luminaire using LEDs 20 watt with 'Eye Soft' technology & glarefree diffuser for perfect application , Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed. |
| 45 | Supply and fixing in repacement PVC round fan cover plate of size 6\\" to 8\\" or as per exiting size complete all as specified and directed. |
| 46 | Supply and fixing in repacement casing caping of existing size as per site including laying of electric wire inside, making electric connection and fixing necessary saddle and gitti at regular interval complete all as specified and directed. |
| 47 | Supply and fixing in replacement LED mirror fitting. 1 x 8/9 W, 230 V Energy efficient , Batten type, polycarbonate housing with reflector cover channel, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed. |
| 48 | Supply and fixing in replacement of single core wire 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. |
| 49 | Supply and fixing in replacement of single core wire 1.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified and directed. |
| 50 | Supply and fixing in replacement of security light fitting LED 35 Watt with dusk and dawn sensor aluminium pressure dia cast housing with touched glass cover IP-66 protection complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with multi-stranded copper conductor of Suitable size from ceiling rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed. |
| 51 | Supply and fix in repair GI pipe bracket ,made out of GI pipe 50mm dia light grade 1.2mtr long bend to the shape 120 degrees angle complete with two nos of clamps for fixing on walls complete all as specified and directed. |
| 52 | Supply and fixing in replacement Garden light/post top lantern with provision of LED bulb holder type 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and 9 W LED lamp complete all as specifed and as directed. |
| 53 | M& labour in replacelment for service wire10 sqmm 2 core pvc insulated and pvc sheathested 1100 volts grade all as specified and directed |
| 54 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion. |
| 55 | Supply and Laying in replacement in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, of cross section area 25 sqmm 4 core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade. Note : (I) Earth work/ sand cushioning shall be measured and paid separately . |
| 56 | Excavation in trenches in soft/loose soil n.exc. 1.5mtr wide and n. exc. 1.5mtr in depth and getting out for laying of cables all as specified and directed |
| 57 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 58 | Returning, filling in, and including spreading, levelling,watering and well ramming in layers not exceeding 25 cm thick complete all as specified. |
| 59 | Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge of size 63 mm outer dia and 50 mm inner dia. |
| 60 | Drilling hole under the road with the help of drilling machine without damaging the road horizonally for rod crossing for cable protection complete all as sp an directed. Please Enable Macros to View BoQ information |
