Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed. |
| 3 | Taking down door shutters of any desc exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. |
| 4 | M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:6 finished even and fair without using extra cement, including taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering. complete all as specified and directed. |
| 5 | M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:4 finished even and fair, including taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering,complete all as specified and directed. |
| 6 | M&L rendering 5mm thick plaster on ceiling in cement mortar 1:3 finished even and fair without using extra cement, including taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering. complete all as specified and directed. |
| 7 | M&L preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper over 2mm waiicare putty complete all as specified and directed. |
| 8 | M&L prepartion of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 9 | M&L preparing new plastered or un-plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 10 | M&L for preperation of old/ untreated walls ( washing, rubbing down and stopping of distempered and painted surfaces) and finishing walls with textured exterior paint of required shade, granular finish : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over 1mm thick putty over plastered surface toprepare the surface even and smooth complete all as specified and directed. Note : Shade as spproved be GE |
| 11 | M&L prepartion of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 12 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. |
| 13 | Walling of random rubble, uncoursed as in well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed. |
| 14 | M&L brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed. |
| 15 | Dismantling timber scantlings like fillets,rails, posts,rafters,purlins,etc under 40Sq.cm in section, in any position complete all as specified and directed. |
| 16 | M&L second class soft-wood plain fillets square or rectangular in sections bull-nosed splayed, rounded on one edge or face area exc 6 sq.cm but not exc. 13 sq.cm secured with nails or brads complete all as specified and directed. |
| 17 | S&F for Non asbestos fibre cement building boards 4mm thick E-board (Classic) false ceiling of size 610mm x 610mm fixed with GI snap grid frame work of same size as GI tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25 mm at the perimeter, including 4mm GI adjustable suspender of required length, including dismantling of old ceiling boards, complete all as specified and directed. |
| 18 | S&F for fixed in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 19 | S&F for Hollow PVC Wall Lining consisting of 5mm thick wood grain ( as approved by GE/ Engr in Charge) printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing (or without PVC frame work), fixed in repair complete all as specified and directed. |
| 20 | Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving’s not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 21 | M&L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even and smooth with using extra cement complete all as specified and directed. |
| 22 | Demolition of cement concrete (reinforced) of any description and in any postion not otherwise specifiacally provided (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 23 | M&L Precast reinforced cement concrete M-15 (Nominal mix ) type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab, manhole cover shelves and similar articles with plain face, set and jointed in cement mortar 1:4 complete all as specified and directed. |
| 24 | M&L Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally to kooping for coloumns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 25 | 25mm thick, plain cement concrete, 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base of floor / path surfaces finished even & rough to receive floor finishes, complete all as specified and directed. |
| 26 | M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles, Incl dismanting. complete all as specified and directed. |
| 27 | M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm cut to size as required as in skirting/dado over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles Incl dismanting complete all as specified and directed. |
| 28 | M&L vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4, Incl dismanting complete all as specified and directed. |
| 29 | M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick backing coat in CM 1:4, Incl dismanting. complete all as specified and directed. |
| 30 | M&L Glazed ceramic any shade tiles in vertical surfaace 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/ 600x300x 7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, Incl dismantling complete all as specified and directed. |
| 31 | M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and directed. |
| 32 | M & L for Machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed. |
| 33 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 34 | S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 35 | M&L 35mm thick 2nd class hard wood plain framed panel shutter factory made (two panel with locking rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and style as per IS-1003 (Part-I) kiln seasoned and chemically treated. complete all as specified and directed. |
| 36 | S&F 35mm thick IInd class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc with sash bars for securing glass , gauge etc size of members of shutters as specified in SSR Part –I section 8 clause 8.24(a) complete all as specified and directed. |
| 37 | S&F 30 mm thickFlush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 38 | S & F Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately ) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to flat iron 40x 5m mm frame work , including other fittings ,hinges ,handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 39 | S&F galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 40 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications, complete all as specified and directed. |
| 41 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 42 | S&F in repairs 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 43 | S&F in repairs 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 44 | S&F in repairs 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 46 | S & F aluminium, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed. |
| 47 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 48 | M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed. |
| 49 | M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 50 | S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 51 | S&F in repairs rolled mild steel bands,straps,supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks(stays),heavy,for large gates,hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified and directed. |
| 52 | M&L plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate cast in situ in back fill of chowkhats and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 53 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones (fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 54 | M&L for Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling. complete all as specified and directed. |
| 55 | M&L 6mm thick external teak wood lipping to block board or veneered particle board 18/19mm thick fixed with nails complete as specified and directed. |
| 56 | M&L for Veneered decorative plywood, grade 1 (with BWR resin) 6mm thick with decorative face veneers on both faces; fixed with screws to timber frame work including dismantling,complete all as specified and directed. |
| 57 | S&F in repairs 75 mm size, hasp and staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 58 | S&F in repairs mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 40mm, complete all as specified and directed. |
| 59 | S & F in repairs rotational moulded polyethylene water storage tank white in colour 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 60 | S & F in repairs rotational moulded polyethylene water storage tank white in colour 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 61 | Disconnecting existing tanks, 250/ 500 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position and making connections with existing water supply line, complete all as specified and directed. |
| 62 | S&F GI tank nipple 15mm bore,complete all as specified and directed. |
| 63 | S&F GI tank nipple 20mm bore,complete all as specified and directed. |
| 64 | S&F GI tank union 15mm bore,complete all as specified and directed. |
| 65 | S&F GI tank union 20mm bore,complete all as specified and directed. |
| 66 | S&F in repair vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white/coloured as approved with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed. |
| 67 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured as approved (excluding fixing bolts, flushing cistern and flush pipe) including Seat and cover for pedestal pan complete all as specified and directed. |
| 68 | S&F as in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed. |
| 69 | S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, white / coloured as approved inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with PTMT coupling nuts and PVC washer at both ends, complete all as specified and directed. |
| 70 | S&F in repairs viterous china, white/coloured as approved, flat back wash hand basin of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed. |
| 71 | S&F in repairs Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 72 | S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed. |
| 73 | S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and directed. |
| 74 | S&F in repairs fancy type, bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 75 | S&F, fancy type, chromium plated, bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 76 | S&F in repairs stop valve/angle valve (Two Way), cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified and directed. |
| 77 | S&F in repairs PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 78 | S&F in repairs 32/ 40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 79 | S&F in repair 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 80 | S&F in repair 40mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 81 | S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 82 | S&F center hole Brass chromium plated wall mixture for mixing hot and cold water , screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 83 | S&F Brass chromium plated Sink mixture for mixing hot and cold water for sink, screwed down for iron pipe for 15mm dia bore pipe,complete all as specified and directed. |
| 84 | S&F in repair chromium plated central hole basin mixer for WHB single lever without popup waste system with 450 mm long braided hoses, complete all as specified and directed. |
| 85 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC,complete all as specified and directed. |
| 86 | S&F in repair plastic Anglo Indian water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC,complete all as specified and directed. |
| 87 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 88 | S & f in repair Chromium plated shower roses of size 125 mm with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 89 | Dismantling of 100 / 110 mm bore dia cast iron/reinforced concrete/PVC drain pipes, jointed in cement mortar/lead joint/Adhesive and taking out of trenches, taking out from walls incl clamps, if required complete all as specified and directed. |
| 90 | Dismantling of 75mm bore dia cast iron/reinforced concrete/PVC drain pipes, jointed in cement mortar/lead joint/Adhesive and taking out of trenches, taking out from walls incl clamps, if required complete all as specified and directed. |
| 91 | S& F in repair PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed |
| 92 | S& F in repair PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed |
| 93 | S& F in repair PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed |
| 94 | S& F in repair PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed |
| 95 | S&F in repairs PVC (SWR) junction single TEE equal or unequal 110mm bore with access door complete all as specified and directed |
| 96 | S&F in repairs PVC (SWR) junction single TEE equal or unequal 75mm bore with access door complete all as specified and directed |
| 97 | S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent 75mm bore complete all as specified and directed. |
| 98 | S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent 100/110 mm bore complete all as specified and directed. |
| 99 | S&F in repairs PVC (SWR) bends with access door of any radius 75mm bore dia complete all as specified and directed. |
| 100 | S&F in repairs PVC (SWR) bends with access door of any radius 100/ 110mm bore dia complete all as specified and directed.. |
| 101 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 102 | S&F in repairs stainless steel soap dish approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 103 | S&F in repairs,Towel Rail 600mm long 20mm dia, D type brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified & directed. |
| 104 | S&F in repairs steel water tubing, 15 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc incl taking down old steel tubing, complete all as specified and directed. |
| 105 | Fixing only steel water tubing, 15 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.Note: The GI tubing obtained from taking down used in this item. |
| 106 | S&F in repairs steel water tubing, 20 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc incl taking down old steel tubing, complete all as specified and directed. |
| 107 | Fixing only steel water tubing, 20 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.Note: The GI tubing obtained from taking down used in this item. |
| 108 | S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc including taking down old sheets with grade of zinc coating 275 complete all as specified and directed. |
| 109 | S&F 0.80 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275, including taking down old sheets . complete all as specified and directed. |
| 110 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including taking down old sheets . complete all as specified and directed. |
| 111 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including taking down old sheets .complete all as specified and directed. |
| 112 | S&F in repairs anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 113 | S&F Powder coated Anodised aluminium door shutters ( powder coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed. |
| 114 | S&F Powder coated Anodised aluminium window and ventilator shutters ( power coating of any colour and thickness not less than 50 micron) side hung type without sash bars, aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprane packing one number of alumium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21,100mm long,anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. |
| 115 | Taking down and refixing the same aluminium door shutter after resecuring/ readjusted to aluminium section weighing not less than 0.55 kg/m including necssary joining cleats,glazing clips,ruber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap bidding, screw etc. and renew unserviceable items such as fittings, sections, glass, Solid PVC sheets etc complete all as specified and directed. |
| 116 | S&F in repairs 4 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane fixed with rubber gasket and aluminium powder coated snap beading etc. complete all as specified and directed. |
| 117 | Hacking out old broken glass from wood or steel frame or frames of any description complete all as specified and directed. |
| 118 | S&F 3 mm thick transparent fibre glass ordinary quality as in glazing not.exc 0.50 sqm each pane fixed in wood or steel frames with oil putty or wooden beads or self tapping screwcomplete all as specified and directed. |
| 119 | S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 120 | S&F in repairs brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed. |
| 121 | S&F brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed. |
| 122 | M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 123 | S&F aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and directed. |
| 124 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and directed. |
| 125 | S & F Rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290(Gde-E-165)quality A. complete all as specified and directed. |
| 126 | PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door / windows, (Each opening n.exc. 1.50 mtr, contained with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed. |
| 127 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 128 | S&F Stainless steel plate rack of size 600mmx750 mm of selected quality complete all as specified and directed. |
| 129 | Preparing surface of sunken slab in toilet flooring and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including , laying and testing of bituminous coating system based on bituminous emulsion, including application of one coat of primer and laying of app membrane as per manufacturer specification in sunken portion with and including sunken floor shall be filled with brick concrete 1:4:8 as per existing thickness ,a pipe of dia 40mm 600mm long GI spout incl. fitting in floor and incl.demolition of floor complete all as specified and directed. |
| 130 | Supply only liquid water proofing compound complete all as specified and directed. |
| 131 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases,splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc.Including dismantling complete all as specified and directed. (Note:- Demolition of old Brick stagging,) |
| 132 | S&F for Steel work in tubular hollow section trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S grade St.-240..Including dismantling complete all as specified and directed. |
| 133 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates as in vertical posts, etc..Including dismantling complete all as specified and directed. (cut to ordinary lengths i.e. within 20mm of the length indicated) |
| 134 | M & L for granite (of any size) tile 18 to 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 20mm thick screed bed of CM 1:6 including cutting and polishing complete all as specified and directed. |
| 135 | M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in Sub base complete all as specified and directed. |
| 136 | M&L for laying Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floorswith grey cement and pigment over 20mm screed bed in CM 1:6 complete allas specified and directed. |
| 137 | M&L Hardcore of gauge n exc. 63 mm, with broken stone bouldersdeposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface completed all as specified & directed. |
| 138 | M&L for 50 mm thick PCC 1:3:6, type C-2 (Using 40 mm graded crushed stone aggregate) as in sub base etc and finished even without using extra cement, complete all as specified and directed. |
| 139 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete and including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed. |
| 140 | S&F stainless steel peg set of Six pegs, fixed/welded/soldered on stainless steel base plate of size 300x30x2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the GE complete all as specified and directed. |
| 141 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all as specified and directed. |
| 142 | S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed. |
| 143 | S & F 32 mm pvc waste pipe to WHB, sink etc. complete all as specified and directed. |
| 144 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 145 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 146 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. |
| 147 | M&L for replacement with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new/Existing concealed PVC rigid conduit medium grade ISI marked including pressed steel with existing colour terminated boxes of Modular GI sheet Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and as directed for the following:- (a) Wiring shall be done by using proper colour coding(b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps complete all as specified and directed. |
| 148 | Description all as per serial item No 147 above but one 5/6 pin socket outlet, 5 amps on the same board complete all as specified and directed. |
| 149 | Description all as per serial item No147above but one 5/6 pin socket outlet, 5 amps, independent complete all as specified and directed. |
| 150 | Description all as per serial item No 147 above but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.Note:-Power circuit shall be done in separate circuit . |
| 151 | All as per the description of serial item no 147 above controlled by two 2-way switches, with cables 1.5sqmm size all as specified and directed. |
| 152 | M&L for replacement point wiring with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including Modular GI sheet Metal flush boxes of anyway (as per site requirement) for mounting switches, sockets, regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. |
| 153 | Description all as per serial item No 152 above but 6 Amp socket outlet on same board complete all as specified and directed. |
| 154 | Description all as per serial item No 152 above but socket outlet 6 Amps independent board complete all as specified and directed. |
| 155 | Description all as per serial item No 152 above but for one 6 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed. |
| 156 | All as per the description of serial item no 152 above controlled by two 2-way switches, with cables 1.5sqmm size all as specified and directed. |
| 157 | S&F Modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed. |
| 158 | S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. |
| 159 | S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 160 | S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 161 | S&F Modular Switch two way 6 Amp, one module 240 volts ISI marked complete all as specified and directed. |
| 162 | S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. |
| 163 | S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 164 | S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed. |
| 165 | S&F Modular white cover plate 8M complete all as specified and directed. |
| 166 | S&F Modular white cover plate 6M complete all as specified and directed. |
| 167 | S&F Modular white cover plate 3M complete all as specified and directed. |
| 168 | S&F Modular white cover plate 1M complete all as specified and directed. |
| 169 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, 4 Ft, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 170 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt, 6500K fitting, 2 Ft, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 171 | S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 5 watt, 6500K fitting, 1 Ft, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 172 | Supply and Fix in repair Recess mounted slim LED luminiare with drop down diffuser light 36W 230 volts AC corrosion resistent complete all as specified and directed. |
| 173 | S & F in repairs factory made DB SPN 8 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection, 240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash color/surfaces complete all as specified and directed.Note: Distribution board and MCB's should be same make. |
| 174 | S&F in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 175 | S &F in replacement of SPN 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 176 | M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit/surface casing capping fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.Note: Cutting chases on the wall whereever required is deemed to be included in unit rate quoted. |
| 177 | Disconnecting/ Taking down Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade oiling and greasing of bearing including refixing and making the connection and testing complete all as specified and directed. |
| 178 | Disconnecting/ Taking down ceiling fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade, oiling and greasing of bearing including refixing and making the conection and testing complete all as specified. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
