|
| 1 | ITEM NO.: 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming. watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means.... (INo21-02, PgNo 153) (STATE SSR) Item Spec: (Bd.A.1 Page No. 259) |
| 2 | ITEM NO.: 2 Providing dry/ trap/ granite/ quartzite/gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) (STATE SSR) Item Spec: (Bd.A. 12 Page No. 264) |
| 3 | ITEM NO.: 3 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.....(INo21-37, PgNo 157) (STATE SSR) Item Spec: (Bd.A.11 Page No. 263) |
| 4 | ITEM NO.: 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed).... (INo24-01 NS, PgNo 175) ( STATE SSR) Item Spec: (Bd. E. 1 Page No. 287) |
| 5 | ITEM NO.: 5 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. |
| 6 | ITEM NO.: 6 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete..... (INo21-36 PgNo 157) (STATE SSR) Item Spec: (Bd.A.10 Page No. 262) |
| 7 | ITEM NO.: 7 Providing and fixing of colour coated Zincaluminium(R) AZ150 (min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter-to-center. The end rib shall be designed for anti-capacity groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm) 301 mm to 600 mm girth (Surface Width)..... (INo38-35, PgNo 237) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 8 | ITEM NO.: 8 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.....(INo23-02, PgNo 173) (STATE SSR) Item Spec: (Bd.C.3 Page No. 275) |
| 9 | ITEM NO.: 9 Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150mm.C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement, welding riveting and oil painting of three coats of approved shade. Weight of gate 35 Kg/smt.....(INo44-10, PgNo 294) (STATE SSR) Item Spec: (Bd.W.6 Page No. 585) Please Enable Macros to View BoQ information |
