|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : REPAIR TO JOINERY AND OTHER REPAIR WORK IN ZONE-IV AREA UNDER AGE B/R-II OF GE (I) KANPUR Contract No : GE(I)/KAN/T-42 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of concrete in ground floors and paving n exc 15cm thickness incl top finishing if exist at site (below or above ground level) un-reinforced concrete complete all as specified and directed. |
| 3 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 (except bricks i.e. by using old bricks after proper cleaning) complete all as specified and directed. |
| 6 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 7 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 8 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed. |
| 9 | S&F for joint free Non Skid ceramic coloured tiles (also in patches) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.09sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:6 complete all as specified and directed. |
| 10 | S&F for joint free Non Skid ceramic coloured tiles (also in patches) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.09sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 11 | S&F for coloured glazed ceramic, joint free tiles fixed in pattern of different colour including border of size 300x450x7 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including 10 mm thick rendering in cement mortar (1:4), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. |
| 12 | M&L for 600 x 600 mm size 8 to 10mm thick polished Vitrified Ceramic tiles of approved colour as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:6 complete all as specified and directed. |
| 13 | All as per item No 11 above above but as in skirting & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 14 | Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 15 | M&L for 15mm thick rendering of brick wall in CM 1:6 finished even & fair on any faces up to ceiling height including required scafolding etc complete all as specified and directed. |
| 16 | M&L for 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & fair with using WPC up to G+2 height including required scaffolding etc complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 17 | M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and fair including required scafolding complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of ceiling applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed. |
| 19 | M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 20 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered surfaces of wall applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed. |
| 22 | M&L for Preparation of newly plastered surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of cement based paint on wall complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surfaces of walls applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed. |
| 24 | Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed.Note : The Coverage is to be strictly maintained for film formation. |
| 25 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete incl removing complete all as specified and directed. |
| 26 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each incl removing complete all as specified and directed. |
| 27 | Taking down shutters of any description n. exc 1.0 sqm each including removing complete all as specified and directed. |
| 28 | Taking down shutters of any description exc. 1.0 sqm and n. exc 2.0 sqm each including removing complete all as specified and directed. |
| 29 | S&F Powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 30 | S&F in repair Powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. hydraulic door closer complete all as specified and directed. |
| 31 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long hinge type B-21 100mm long suitable handle and tower bolts complete all as specified and directed. |
| 32 | All as per item No. 30 above, but wire gauzed window, complete all as specified and directed. |
| 33 | S&F 4.8 to 5 mm thick tinted glass each panes fixed on aluminium door shutter with and including aluminium beading, rubber gasket etc. complete all as specified and directed. |
| 34 | Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 35 | S&F 3 mm thick sheet glass panes any size fixed on door/ window shutters with and including beading/ putty/ rubber gasket etc. complete all as specified and directed. |
| 36 | S&F 12 mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete all as specified and directed. |
| 37 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 38 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | All as per item No. 38 above, but size 65 x 125 mm complete all as specified and directed. |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid type/ Plain flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant & fixing with stainless steel butt hinges on door with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 42 | All as per item No 40 above but 30mm thick complete all as specified and directed. |
| 43 | S&F 30 mm thick plain WPC Factory made wire mesh solid door shutters (confirming as per IS-4020) with density not less than 600 Kg/ cum. Manufactured by an ISO : 9001-2015 certified company. The door to be pannened with SS mosquito mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screw. Door should be water proof, fire retardant and having screw holding capacity complete all as per manufacturer specification complete all as specified and directed. Note : Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm. |
| 44 | S&F in repair stainless steel curtain rods of 25mm dia as in doors/ windows SS brackets fancy type ,including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
| 45 | S&F 150mm stainless steel extruded type handle fixed with SS screws etc. complete all as specified and directed. |
| 46 | S&F in repair 150mm stainless steel extruded type handle fixed with SS screws etc. complete all as specified and directed. |
| 47 | S&F 150 mm stainless steel barral tower bolt of extruded section fixed with SS screws etc complete all as specified and directed. |
| 48 | S&F in repair 150 mm stainless steel barral tower bolt of extruded section fixed with SS screws etc complete all as specified and directed. |
| 49 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 50 | S&F in repair stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 51 | S&F 200mm stainless steel extruded type handle of as approved fixed with SS screws etc. complete all as specified and directed. |
| 52 | S&F in repair 200mm stainless steel extruded type handle of as approved fixed with SS screws etc. complete all as specified and directed. |
| 53 | S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 54 | S&F in repair 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 55 | S&F 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 56 | S&F in repair 250 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 57 | S&F 75mm long stainless steel door stopper with rubber shoes in bottom complete all as specified and directed. |
| 58 | S&F in repair 75mm long stainless steel door stopper with rubber shoes in bottom complete all as specified and directed. |
| 59 | S&F 200/ 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 60 | S&F in repair 200/ 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 61 | M&L for taking down and refixing the door shutter in same opening after Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed. |
| 62 | S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 63 | Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding Window with mesh shutter - (2-glass shutter and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm) x 2.20 mm for outer frames, (39 mm x 58 mm) x 2.20mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (39 mm x 58 mm) x 2.0 mm fitted with Vinyl Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Window shall be provided with standard hardware & Single point locking system of touch Lock system. the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.NOTE: Cost of ss wire mesh and 5mm clear glass is deemed to be inclusive in this item. |
| 64 | S&F factory made uPVC white colour casement (Openable) glazed / gauzed window with provn of AC opening as per design approved by engr-in-charge. window to be made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated) and 5mm float glass.NOTE: (i)Cost of ss wire mesh and 5mm clear glass is deemed to be inclusive in this item.(ii) Net opening will be measured for payement purpose. |
| 65 | Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed. |
| 66 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed. |
| 67 | S&F in repair false ceiling tiles of Size 595 x 595mm of required texture including repair and tightening of existing GI/ aluminium grid complete all as specified and directed. |
| 68 | S&F Solid PVC Wall Lining/ panneling consisting of 5mm thick single side prelam PVC sheet and balance plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 35mm wide 5mm thick PVC fillet frame as per specifications and direction. |
| 69 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 70 | S&F HDF-HMR (High Density Fibre Board Moisture Resistant) of thickness 18 mm with decorative choice lamination on one side and plain colour on other, having minimum density of 850 Kg/Cum, lead free, anti-bacterial & anti fungal, termite & borer proof & water proof including cutting, screwing as in kitchen cabinet, cupboard shutter also matching the sawn edges using same colour edge band tape complete all as specified and directed. |
| 71 | S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed. |
| 72 | S&F in repair teliscopic drawer/ cabine channel channel 500/ 450mm mm long complete all as specified and directed. |
| 73 | S&F 3mm thick aluminium composit pannel (ACP) sheet to be fixed in door/ woindow/ partition complete all as specified and directed. |
| 74 | S&F cutlery basket/ kitchen utensils for cabinet/ drawers complete all as specified and directed |
| 75 | S&F 100mm size stainless steel handles of design approved by GE complete all as specified and directed. |
| 76 | S&F of continuous piano hinges mild steel bright finish or electro galvanished width of flaps when open in 20 mm complete all as specified and directed. |
| 77 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed. |
| 78 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 79 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and as directed. |
| 80 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings as specified and directed. |
| 81 | S&F of Pre- painted galvalume aluminum zinc coating GI based profile sheet TCT with gsm -150 sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed. |
| 82 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash on wall complete all as specified and directed. |
| 83 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on wall complete all as specified and directed. |
| 84 | M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 85 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of colour wash on wall complete all as specified and directed. |
| 86 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of cement based paint on wall complete all as specified and directed. |
| 87 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of cement based paint on wall complete all as specified and directed. |
| 88 | M&L for applying a layer JK/Birla white putty, 1mm average thick before applying wall finishes complete all as specified and directed. |
| 89 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of oil bound distemper on wall complete all as specified and directed. |
| 90 | M&L for Preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of oil bound distemper on wall complete all as specified and directed. |
| 91 | M&L for preparation of newly plastered surfaces of walls applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed. |
| 92 | Preparation of old surfaces of walls and one coats of exterior weather proof anti algae 100% acrylic emulsion complete all as specified and directed. |
| 93 | M&L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour)complete all as specified and as directed. |
| 94 | M&L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour )complete all as specified and as directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
