|
| 1 | Taking down carefully hangar light fitting in any height and refixing the same in the same position after fixing bird netting including provision of bird spike complete all as specified and directed by Engineer-in-Charge. |
| 2 | Supply & Fixing of bird control nets of polyolefin all weather proof co-polymer, machine knotting using CNC machine with DSLS technology for anti slip knotting, mesh size 20mmx20mm and diameter of twine 01mm with 2mm dia border rope including 2mm dia tie ropes braided/ standard rope of polyolefin coplymers at an interval of 10ft having length of 6ft including fixing at any height / any location all as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge. |
| 3 | M & L for MS frame work made with framed profile section of required size and shape to hang the bird proof net all as specified and directed by Eng-In-Charge. ( Note: The frame should be supported with 3mm dia GI hanger wire in the centre with purlins. The cost of GI wire is also include in this items.) |
| 4 | M & L for 1.4mm dia stainless steel welded mesh of aperture 25mm fixed to MS frame work all as specified and directed by Eng-In-Charge. (Note: MS frame will be measured and paid seperately.) |
| 5 | Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in hard / dense soil complete all as specified.and directed by Engineer-in-Charge |
| 6 | M&L for PCC 1:3:6 type C-2 using 40mm crushed graded stone aggregates as in foundation, filling and mass concrete etc complete all as specified and as directed. |
| 7 | S& F Fe410-W(GdeE-250) quality A Rolled steel in Joist, channel, angle, or tee sections, GI pipes as in post, rafter, purlin gate, flat etc., fixed independently, without connecting plates, etc. complete all as specified and directed by engineer in charge. |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 9 | Supply only 75×75mm size 4mm dia chain link MS galvanised fencing any type complete all as specified and directed by Engineer-in-Charge |
| 10 | Supply and fixing of mild steel TMT bars 12 mm dia round cut to length bent to shape for stifners etc and similar work complete all as specified and directed by Engineer-in-Charge |
| 11 | Supply and fixing of Mild steel screw bolts (machine made) 5 to 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified.and directed by Engineer-in-Charge |
| 12 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 13 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified. |
| 14 | S&F automatic motion sensor door with clamp,hanger,anti drop device,anchor units,roller belt,sliding arrangements,belt connector fitting,motor & including all necessary fittings as required,the capacity of the motor should be suitable for handling weight upto 200kg/door,single phase,230V with width of opeaning of the door upto 2.00 meter with adjustable opeaning and closing speed completely installed along with toughned glass to detect motion from both sides complete all as specified and directed by Engr in charge. MAKE: DROMA/MODI GAURD or other equivalent make.NOTE: TOUGHNED GLASS WILL BE PAID SEPERATELY. |
| 15 | S&F 10 mm thick toughned glass including all necessary fitting,beadings to hold toughned glass straight in position along with provision of making holes in the glass complete all as specified and directed by Engr-in-charge. |
| 16 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 18 | Material & Labour for providing and fixing stainless steel (Grade 304) collapsible gate made of hollow tubes, channels, plates etc., including top and bottom runners, handles, welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, as specified, erected in position and securing runners with holdfast and brackets,complete all as specified and directed by engineer-in-charge |
| 19 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of indow above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi chambered frame, with inbuilt roller rack and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile imension in higher side shall be accepted but no extra payment on this account shall be made. |
| 20 | M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete,complete. all as specified. |
| 21 | M&L brick work with sub class ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 all as specified. |
| 22 | Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface fininished even and smooth without using extra cement w |
| 23 | M& L for preparation of plastered or unplastered surfaces and applying 3mm putty and applying two plastic emulsion paint , complete all as specified and as directed. |
| 24 | M&L 12mm thick Seamless calcium silicate ceiling made any size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish. |
| 25 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel a 457 mm centre to centre. |
| 26 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 27 | S&F 4mm thick solid color Aluminium composite panel (ACP) sheet for making entrance gate, wall etc, colour/shade are approved by GE , complete all as specified and directed by engr in charge. |
| 28 | S&F Anodised aluminium frame for sliding doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 29 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles & tower bolt 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 30 | S&F Stainless steel metallic door lock with 04 Nos of lever complete all as specifed and directed by Engr-in-Charge |
| 31 | S&F 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows complete all as specified. |
| 32 | S&F 300mm long Stainless steel sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, bolts and sliding bolts complete all as specifed and directed by Engr-in-Charge |
| 33 | S&F Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 34 | S&F Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 35 | S&F in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing |
| 36 | S&F in repair aluminium die cast body Door closer hydraulically regulated design No2 universal type suitable for door shutter complete all as specified. |
| 37 | Reinforced cement concrete (Type B1 1:2:4, 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and |
| 38 | S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165). |
| 39 | Demolition of brick works built in cement mortar including all quoins pillars arches etc including PCC benching/coping etc |
| 40 | M& L for preparation of plastered or unplastered surfaces and applying 3mm putty and applying two coats of weather proof acrylic exterior emulsion paint as approved of any shade/colour complate all as specified and as directed. |
| 41 | Dismantling plain or corrugatd steel sheeting any gauge, thickness any type incl. Nanital or similar pattern roof covering |
| 42 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall/parking shed,fixed with self tapping screws as specified. |
| 43 | S&F 0.63mm thick plain galvanised, mild steel sheeting ,in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed), roof coverings/cladding to wall/parking shed,fixed with self tapping screws as specified. |
| 44 | S&F in Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directe by Enginerr-in charge. . |
| 45 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. |
| 46 | S&F in repair plastic water closet seat and cover incl. mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge. |
| 47 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified. |
| 48 | S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 49 | S&F in 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and floor etc complete all as specified and directed by Engineer-in charge. |
| 50 | S&F in repair any dia bore PVC P/S trap as required complete all as specified and directed by Engineer-in-charge. |
| 51 | S&F in repair aluminium die cast body Door closer hydraulically regulated design No2 universal type suitable for door shutter complete all as specified. |
| 52 | Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with bracket and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw compete all as specified. |
| 53 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface |
| 54 | M&L for Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in sub base of flooring, plinth protection etc complete all as specified |
| 55 | M&L for bringing extra earth if required from outside ministry of defence (MOD) land for filling and raising (or lowering) earth, spreading in layer not exc 25 cm thick, watering, compacting and finishing to required gradient/ shape and deposited where complete all as specified |
| 56 | Dismantling of floor, hearth or wall tiling any type floooring including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 57 | M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified. |
| 58 | M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete, all as specified. |
| 59 | M&L vitrified coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified. |
| 60 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw thdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, odules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. ( M.S. hold fast/ lugs or SS dash fasteners shall be paid for including). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster,Filling of concrete 1:3:6 type c-1 hold fast for chowkhat,similar wall tile,floor tile etc and as per site requirement. |
| 61 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge |
| 62 | S&F Factory made single extruded WPC (wood polymer composite) 35mm thick solid wire gauge door shutters including of double wire mesh (steel & aluminium XPM) , Comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screw , joint-less design manufactured with cnc machine . design as per executive engineer . |
| 63 | Supply and fixing 5.00mm thick glass fixed with rubber packing for securing in aluminium/uPVC windows snap beading and metal pins in skelton shutters of doors and windows complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and fixing stainless steel wire cloth fixed as in uPVC Window frame/Steel window box type frame/skeleton shutters frame etc, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples. |
| 65 | S&F for Window Framed work such as grills of approved design/pattern, with approved standerd section and fixed to existing window, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 66 | S&F Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 67 | S&F Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 68 | S&F install and testing Exhaust fan plastic body AC Single phase 230/240 Volt 50Hz ,1200RPM of size 300 mm , sweep with blades, frame and louver of fixing with suitable stud/Anchor fastner complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F install and testing Exhaust fan plastic body AC Single phase 230/240 Volt 50Hz ,1200RPM of size 250 mm sweep with blades, frame and louver of fixing with suitable stud/Anchor fastner complete all as specified and directed by Engineer-in-Charge. |
| 70 | Cutting hole through 0.6 mtr deep wall for fixing of exhaust fan in circular shape and making good the disturbed surfaces with cement morter plastering including fair finishing and white wash to the exisisting surface complete all as directed by Engr-in-charge. |
| 71 | M & L for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated and unsheathed FRLSH copper conductor single core multi stranded flexible copper cable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size for fixing of modular switches/sockets/regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. |
| 72 | M & L for module cover plate with frame 01 module complete all as specified and directed. |
| 73 | M & L for Modular metal Flush box 01 module complete all as specified and directed. |
| 74 | M & L for modular switch 1 way 6/10 Amp 1 Module complete all as specified and as directed. |
| 75 | Point wiring for explosive sheds and other required bldgs with 1100 Volts grade PVC insulated single core FRLSH Cable with standed copper conductor of size 1.5 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not point less than 19mm dia with and includings all accessories , bends, elbow, coupling etc and incl 1.5 Sqmm earth FRLSH copper wire etc complete all as specified and directed. |
| 76 | Point wiring for explosive sheds and other required bldgs with 1100 Volts grade PVC insulated single core FRLSH Cable with standed copper conductor of size 2.5 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not point less than 19mm dia with and includings all accessories , bends, elbow, coupling etc and incl 2.5 Sqmm earth FRLSH copper wire etc complete all as specified and directed. |
| 77 | Supply and fix Switch Flame proof rotary switch , in cast aluminium LM-6 suitable for 16 A, Single pole 250 V with protection IP-65, equipment standard as per IS-2148/81 Complete all as specified and directed by Engineer-in-Charge . |
| 78 | Supply and fix Switch Flame proof rotary switch with termination box in , in cast aluminium LM-6 suitable for 16 A, double pole 250 V with protection IP-65, equipment standard as per IS-2148/81 Complete all as specified and directed by Engineer-in-Charge . |
| 79 | Supply and fix Flame Proof Switch Socket and plug combined in LM6 Cable termination box in LM6, 16 A, 250 Volt , 2P+ Earth with protection IP-65 equipment standard as per IS-2148/81 Complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply and fix LED Tube light fitting 1 x 16 Watt / 20 Watt Flame proof type FLP-WP made of aluminium alloy LM6 Complete with all accessories suitable for Gas / Vapour Group of IIA & IIB and Zone 1 & IP-65 Protection complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supply and fix LED Tube light fitting 2 x 16 Watt / 20 Watt Flame proof type FLP-WP made of aluminium alloy LM6 Complete with all accessories suitable for Gas / Vapour Group of IIA & IIB and Zone 1 & IP-65 Protection complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply and fixing of Flame proof Bulk head light fitting of 30 watt , IP 66 Protection of cast aluminium alloy material and heat and impact resistance toughen A clear glass having anti corrisive epoxy powder coataed finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 83 | M & L Flame proof distribution board SPN 8 Way (Totally enclosed dust and flame proof / jet proof) IP-66 Protection including flame proof MCB SPN 32 Amps -01 Nos , SP-5 to 30 Amps - 06 Nos 240 Volts AC 10 KA Flame proof suitable for gas group I/IIA /IIB/IIC as per IS-2148 of 1981 with complete Internal Bus bar and wiring upto terminal complete all as specified and direcetd. |
| 84 | S&F install and testing ISI marked Water heater 25 Ltr capacity 5 STAR Rating vertical type , 1500/2000 Watt heating element,PVC connection 450 mm (18\\") with brass connector of series for both outlet and inlet, rated pressure 6 Kg/Sqcm supplied and installed complete with arrangement of fixing with suitable stud/Anchor fastner including PCC work with drilling holes if studs provided complete all as specified and directed by Engineer-in-Charge. Make- Havells / V-Guard /Racold |
| 85 | M & L for sub main wiring in PVC casing and caping of reqd size 2 x 2.5 Sqmm PVC insulated multistrand copper conductor with 01x2.5 Sqmm PVC insulated multistrand copper conductor as earth continuity wire complete all as specified and directed. |
| 86 | S & F Socket out let 2 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed. |
| 87 | S & F Switch Piano flush button single pole one way15 Amp, 240 volt ISI marked all as specified. |
| 88 | Supply and laying of GI water tubing medium grade of size 15mm conforming to IS 1239 ISI marked including all GI fitting screws band tee union, nippple,flange etc laid in fixed on floor or wall and ceilings complete all as specified and directed. |
| 89 | Supply and fixing Stop cock brass 15 mm dia with chromium plated for iron pipe ISI marked with screw end and fancy type complete all as specified and directed. |
| 90 | S&F 15 mm dia cast copper alloy Bib tab with crutch or butterfly handle, screwed down , screwed with chromium plated for iron pipe and fixed fancy type, ISI marked all as specified and directed. |
| 91 | Cutting & screwing extg steel tubing of size 15 mm dia for alterations or additions or lengthening screw on pipe to form connector and done in position without taking down all as specified and directed. Please Enable Macros to View BoQ information |
