Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Wise BoQ BoQ_Ver4.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: Executive Engineer TLMD-I, Bemina Srinagar, JKPTCL. Name of the Work: Rate Contract for supply of electrical spares and minor store/hardware items, as given in the detailed BoQ, from Government approved, reputed, experienced, competent and financially sound electrical Contractors/Firms/Suppliers/Joint Ventures/ Executors/ OEMs or registered firms already in the trade e-NIT No: 03/JKPTCL/TLMD-I/SGR/2026-27; Dated: 18.06.2026 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)Note: The quoted rates for all the items shall include supply of the material to the stores of the TLMD-I .The rates shall be inclusive of all taxes and duties etc. The quoted rates should be FOR Divisional Stores TLMD-I Bemina.All the items to be supplied under the contract should be of highest quality and should comply with all the technical specifications suitable for operation under given conditions. Also proper approval of vendor/ brand/ Technical Specification for all the items mentioned below needs to be sought from the Division before actual supply of the material. NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Qty Unit Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE(with taxes) Rs. GST (If applicable in Percentage) GST Amount in Rs. P HSN / SAC Code TOTAL AMOUNT With Taxes inRs. TOTAL AMOUNT including taxesRs. TOTAL AMOUNT In Words |
| 2 | Part: (A) 132kV Transmission Lines (Material ) |
| 3 | Al. alloy as per IS: 617 of 1975 PG clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) for ACSR zebra conductor (Make: RUL, ZI, Honeywell, Burma, PEE, equivalent etc/ as per departmental sample provided). |
| 4 | P G Clamp for ACSR Panther conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 5 | P G Clamp for ACSR Moose conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 6 | Bi-mettalic CT Clamp (universal take off) for Panther conductor with CT terminals suitable for 132KV/33KV CTs as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 7 | Bi-mettalic Isolator pad clamp (universal take off) of Panther conductor with pad terminals suitable for 132KV /33KV isolators as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 8 | Bi-mettalic Isolator pad clamp (universal take off) of zebra conductor with pad terminals suitable for 132KV /33KV isolators as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 9 | Bi-mettalic Breaker pad clamp (universal take off) of zebra conductor with pad terminals suitable for 132KV /33KV breakers of SF 6 type-ABB,CGL, Siemens, BHEL/VCB type- S&S, GEC Alsthom, BHEL, ABB, Siemens, Megawin etc as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 10 | Bi-mettalic CT pad clamp (universal take off) for twin ACSR zebra conductor with conductor spacing 300mm and CT terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV CT as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 11 | Bi-mettalic Twin isolator pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) for twin ACSR zebra conductor with conductor spacing 300mm and Isolator pad clamp Terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin zebra conductor with pad terminals suitable for 132KV /33KV isolator as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 12 | Bimetallic CT pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) for twin Panther conductor with conductor spacing 300mm and CT terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 13 | Bimetallic breaker pad clamp (universal take off) conforming to IS: 5561-1970 (ammended upto date) for twin Panther conductor with conductor spacing 300mm and terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 14 | Bi-mettalic Isolator pad clamp (univercial take off) conforming to IS: 5561-1970 (ammended upto date) for twin Panther conductor with conductor spacing 300mm and isolator terminal spacing of 140mm having bolts hot dip galvanized nuts and washers electro galvanized and current carrying capacity equivalent to ampacity of twin panther conductor with pad terminals suitable for 132KV /33KV isolator of reputed/standard Make |
| 15 | Bi-mettalic Isolator pad clamp (univercial take off) conforming to IS: 5561-1970 (ammended upto date) for single Panther conductor of reputed/standard Make |
| 16 | T-clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) for ACSR -Panther-ACSR Panther conductor of reputed/standard Make |
| 17 | T-clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) for ACSR Moose-ACSR Moose conductor of reputed/standard Make |
| 18 | T-clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) for ACSR zebra-ACSR Zebrar conductor of reputed/standard Make |
| 19 | T-clamps 3 bolt type conforming to IS: 5561-1970 (amended upto date) for ACSR zebra-ACSR Panther conductor of reputed/standard Make |
| 20 | Single suspension hardware fitting for zebra conductor (Line Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 21 | Single tension hardware fitting for ACSR zebra conductor (Line Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 22 | Double suspension hardware Bolted fitting for zebra conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 23 | Double tension hardware fitting Bolted for zebra conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 24 | Single tension fitting Bolted for ACSR twin Zebra conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 25 | Single tension hardware fitting for ACSR panther conductor (Line Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 26 | Single Suspension hardware fitting for ACSR panther conductor (Line Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 27 | Single tension fitting Bolted for ACSR twin panther conductor (Live Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 28 | Double suspension hardware fitting for Panther conductor (Line Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 29 | Double tension hardware fitting for Panther conductor (Line Type) as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 30 | Single suspension fitting Bolted for ACSR twin panther conductor as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 31 | Compression type repair sleeve suitable for ACSR Panther conductor of 30/7/3.18mm designation as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 32 | 4R stock bridge type vibration damper suitable for ACSR Panther as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 33 | Repair Sleev for ACSR Panther as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 34 | Mid span compression joint for ACSR Panther as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 35 | Turn Buckle made of drop forged high tensile steel and should be HDG with the following specifications or as per the sample provided by the purchaser.1.Working Load Limit = 4.54 Ton2. Dia. Thread = 1 inch 3. Take up = 6 Inch4. Length Closed Position (B) = 447 mm5. Length Open Position (C) = 555 mm 6. Length Closed Position (D) = 532 mm7. Openinig jaw (E) = 30 mm 8. Length Inside (F)= 50 mm9. Dia. Pin(G) = 22 mm 10. Thickness Jaw eye(H)= 20 mm11. Dia. Jaw eye(I) = 55 mm 12. Weight Each= 5.21 Kg |
| 36 | Disc Insulator 70KN B&S type, Anti Fog (BHEL, Rashtriya/ IEC, Jayashree/Aditya birla Make) as per relevant IS/IEC amended upto date |
| 37 | Disc Insulator 90KN B&S type, Anti Fog (BHEL, Rashtriya/ IEC, Jayashree/Aditya birla Make) as per relevant IS/IEC amended upto date |
| 38 | Disc Insulator 120KN B&S type, Anti Fog (BHEL, Rashtriya/ IEC, Jayashree Make) as per relevant IS/IEC amended upto date |
| 39 | Turn table for ACSR Panther/Zebra conductor with capacity of 3MT made of mild steel with double ball bearing Likely makes PEE, ZI, Honeywell, Burma etc as per relevant IS/IEC amended upto date |
| 40 | Four sheave pulley steel frame forged swivel hook as per IS 8610 pulley material and ball bearing of Gun metal bush with open type pulley ISI mark suitable for 12 mm steel rope of reputed/standard Make |
| 41 | Bolted type come along clamp suitable for ACSR panther 37/3.15mm with Al alloy clamp and groove inside for conductor gripping. Hook and eye bolt of galvanized carbon steel, locking bolts made of high tensile steel IS: 2121 Tension limits = 2495Kg Likely makes PEE, ZI, Honeywell, Burma etc |
| 42 | Bolted type comealong clamp for Earth wire size 7/3.66mm Groove according to size of Earth wire bolts of high tensile steel Likely makes PEE, ZI, Honeywell, Burma etc as per relevant IS/IEC amended upto date |
| 43 | Snatch Galvanized Single Sheave pulley size 6” dia pulley on ball bearing/Gun metal bush with swivel hook open type with side locking suitable for use in Transmission Line stringing Likely makes PEE, ZI, Honeywell, Burma etc as per relevant IS/IEC amended upto date |
| 44 | Steel wire rope sling 16mm dia ISI Make heavy duty as per sample and shall be of standard quality and make as per relevant IS/IEC amended upto date |
| 45 | Preformed guy grip for stainless steel guy wire or steel wire shilling of size 12mm with standard seat dimensions and other standard specifications as per the latest standards in vogue as per relevant IS/IEC amended upto date and of reputed/standard Make |
| 46 | Conductor drum Lifting Jack compatable for 0.2 Panther /0.4 Zebra /0.5 Moose drums and shall be made of high strength mild steel and with hrdraulic jack mechanism or equivalent or as per the sample provided by the purchaser (as per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 47 | 0.2 ACSR Conductor wire conforming to ACSR core wire as per IS; 398 (II)- 1996 a. Stranding & Steel wire dia : 7/3.0mm,Aluminium Wire Dia= 30/3.0 b. No. of strands, Steel Core = 7 Outer Aluminium Layer = 30(of reputed/standard Make) |
| 48 | Galvanized steel earth wire conforming to ACSR core wire as per IS; 398 (II)- 1976a. Stranding & wire dia : 7/3.66mm ,b. No. of strands, Steel Core = 1 Outer Steel Layer = 6(of reputed/standard Make) |
| 49 | 0.5 Twin Isolator Pad Clamp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 50 | 0.5 Single Isolator Pad Clamp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 51 | Bi-Metallic CT Pad Clamp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 52 | Bi-Metallic Twin CT Pad Clamp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 53 | 3Phase 400A 35KA MCCB (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 54 | 2V, 300Ah Dry Type Battery Cell (Exide, HBL or equivalent) (As per relevant IS/IEC amended upto date) |
| 55 | 12V, 180 AH Battery for DG set (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 56 | Clamp on Meter (0-1000mA-10A) (Motvane, Megger or equivalent Make) (As per relevant IS/IEC amended upto date) |
| 57 | HTLS Conductor (Size equivalent to Panther Conductor) as per Technical specifications (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 58 | Suspension Clamp suitable for HTLS Conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 59 | Dead End Tension clamp suitable for HTLS Conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 60 | Suspension clamp for pilot string suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 61 | Mid span Compression joint suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 62 | Repair Sleeve suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 63 | Vibration Damper suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 64 | 70KN Disc Insulatorswith B&S disgnation of 16mm suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 65 | 120KN Disc Insulatorswith B&S disgnation of 20mm suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 66 | 70KN Single Suspension Hardware Fitting without clamp suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 67 | 120KN Single Tension Hardware Fitting without clamp suitable for HTLS conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 68 | (Part -B)132/33KV Switch Yard Items/Miscellaneous items |
| 69 | 33 KV Current Transformer (CT) 1200-800-400/1-1-1 A (Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 70 | Single phase, 50 c/s 33KV Current Transformers (1200-600-300/1-1-1 A), 40KA for one second, rated dynamic current 100KA(peak), Class A insulation, Burden 30 VA (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 71 | 33 KV Aux Current Transformer (CT) 20-10/1-1-1 A (Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 72 | 33 KV PotentialTransformer 20VA Burden class 0.2 3P(Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 73 | 132 KV Current Transformer (CT) 800-400-200/1-1-1-1-1 A (Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 74 | 132 KV Current Transformer (CT) 800-400-200/1-1-1-1-1 A (Make: MEHRU/ ABB /L&T) (As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 75 | 132 KV Current Transformer (CT) 1200-800-400/1-1-1-1-1 A (Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 76 | 132 KV Current Transformer (CT) 600-300-150/1-1-1-1-1 A (Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 77 | 132 KV PotentialTransformer 20VA Burden class 0.2 3P(Make: MEHRU/ ABB /L&T or similar Make As specified in Technical Specifications) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 78 | Single phase 50c/s outdoor metal oxide gapless type 120 Kv (rms) Surge Arrestor, class 3 including surge counters/monitors with all accessories (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 79 | Single phase 50c/s outdoor metal oxide gapless type 30 Kv (rms) Surge Arrestor, class 3 including surge counters/monitors with all accessories (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 80 | Silica Gel suitable for 132/33kV Power Transformer (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 81 | Matel Halid lamp 400 watt (philips, crompton, Bajaj, Havells Make) (As per relevant IS/IEC amended upto date) |
| 82 | MH Choke/Ballast 400 watt (philips, crompton, Bajaj, Havells Make) (As per relevant IS/IEC amended upto date) |
| 83 | Igniter 400 watt (philips, crompton, Bajaj, Havells Make) (As per relevant IS/IEC amended upto date) |
| 84 | LED Street light fitting 60/65 watt (philips, crompton, Bajaj, Havells Make) (As per relevant IS/IEC amended upto date) |
| 85 | LED Street light fitting 90/100 watt (philips, crompton, Bajaj, Havells Make) (As per relevant IS/IEC amended upto date) |
| 86 | MCB 16 Amp (Havells, standard, L&T make) (As per relevant IS/IEC amended upto date) |
| 87 | MCCB 32 Amps 2-Pole (Havells, standard, L&T make, Scheinder, ABB) (As per relevant IS/IEC amended upto date) |
| 88 | MCCB 63 Amps 2-Pole (Havells, standard, L&T make, Scheinder, ABB) (As per relevant IS/IEC amended upto date) |
| 89 | MCB 32 Amp (Havells, standard, L&T make, Scheinder, ABB) (As per relevant IS/IEC amended upto date) |
| 90 | MCCB 100 amp 4 pole (Havells, standard, L&T make, Scheinder, ABB)(As per relevant IS/IEC amended upto date) |
| 91 | MCCB 200 amp 35KA 4 pole (Havells, standard, L&T make, Scheinder, ABB) (As per relevant IS/IEC amended upto date) |
| 92 | Contactor MN30 (L&T, Siemens) (As per relevant IS/IEC amended upto date) |
| 93 | Contactor MN32 (L&T, Siemens) (As per relevant IS/IEC amended upto date) |
| 94 | Contactor ML2 (L&T, Siemens) (As per relevant IS/IEC amended upto date) |
| 95 | Contactor ML3 (L&T, Siemens) (As per relevant IS/IEC amended upto date) |
| 96 | Push-buttons 3-5 Amp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 97 | 3-phase D.O.L starter (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 98 | 5 H.P. 3-Phase Dewatering motor with pump ( Make: Crompton Greaves, Kiloskar, Havells) or as per the specifications provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 99 | Suction pipe 4\\" for 5HP motor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 100 | Delivery pipe 4\\" for 5HP motor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 101 | Marshalling Kiosk with terminal blocks (size 3feet x 3feet x 1feet with roof top) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 102 | Static Rope 1/2 inch (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 103 | 100A 4 pole Change Over switch of HPL, Anchor, Legrand make (As per relevant IS/IEC amended upto date) |
| 104 | Cable Ferrules A to Z & 0 to 9 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 105 | PP rope 1/2\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 106 | PP rope 3/4\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 107 | PP rope 1\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 108 | Manila rope 1/2\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 109 | Manila rope 3/4\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 110 | Manila rope 1\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 111 | Chain pully block 3 ton (ZI, PEE, Honeywell make) (As per relevant IS/IEC amended upto date) |
| 112 | Chain pully block 5 ton (ZI, PEE, Honeywell make) (As per relevant IS/IEC amended upto date) |
| 113 | Pulling/lifting machine 5 ton (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 114 | Pulling/lifting machine 10 ton (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 115 | 5 Ton Winch Machine (BOSCH, Hiltey) (As per relevant IS/IEC amended upto date) |
| 116 | Primary injection Test Kit (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 117 | Earthing Discharge Rod (132 kV) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 118 | Earthing Discharge Rod (33 kV) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 119 | Hydrallic Conductor cutter (Bosch) (As per relevant IS/IEC amended upto) |
| 120 | Spring charging motors 110V DC suitable for 33 KV VCB's of ABB, BHEL, SIEMENS, CGL, Megawin make or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 121 | Spring charging motors 110v DC suitable for 132 KV SF6 breakers of ABB, BHEL, SIEMENS, CGL make or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 122 | Electric Ceiling fan 22-inch (Make Bajaj, Usha, Orient, Havells) (As per relevant IS/IEC amended upto date) |
| 123 | Digital meters [Set of Ammeter (0-1200 A), Volt meter for 132KV C&R Panel & voltmeter for 33KV C&R Panel] (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 124 | Digital voltmeter for 33kV and 132kV C&R Panels, (6\\"x6\\") (Make Rishab/ABB/AE/Secure) (As per relevant IS/IEC amended upto date) |
| 125 | Digital Megawatt meter for 33kV and 132kV C&R Panels, (6\\"x6\\") (Make Rishab/ABB/AE/Secure) (As per relevant IS/IEC amended upto date) |
| 126 | Cable Glands of sizes (Comet, ascon, National, Sigma) (As per relevant IS/IEC amended upto date) |
| 127 | Scissor for branch cutting Make Falcon/equivalent or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 128 | Branch cutting Plier Make Falcon/equivalent or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 129 | Brush cutter heavy duty (Make: STIHL/Honda/Bosch) or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 130 | Bush cutter heavy duty (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 131 | Refillng of Co2 Gas for empty firefighting cylinders (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 132 | Aluminium Ladder double folding type (30 feet long) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 133 | Motorized Chain Saw 18 inch (petrol run)(Make: Honda/STIHL EQUIVALENT MAKE) (As per relevant IS/IEC amended upto date) |
| 134 | 5KW Single Phase portable welding machine with all accessories (Electra, Arm welders, etc) or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 135 | Yoke Plate for tension fittings (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 136 | Single Tension fitting 4 bolted for ACSR Twin Moose Conductor (For yard Type) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 137 | Single Suspension fitting 4 bolted for ACSR Twin Moose Conductor (For yard Type) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 138 | Crimping Tool (Taparia, Falcon, Jahallni) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 139 | Aluminium Ladder 8-feet Tool type (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 140 | Extension Cord 15 Amp. With cord 10 Feet (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 141 | Shocker type toggle switch for ABB breaker (33 kV VCB) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 142 | Mechanical / Spring charging system for 33 kV BHEL VCB (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 143 | Mechanical / Spring charging Mechanism system for 33 kV ABB Model No VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 144 | 33kV Vacuum Interrupter suitable for 33KV VCB Model No VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 145 | Tripping/Closing Coil Assembly with snubber card suitable for 33KV VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 146 | Auxillary switch for 33KV VCB Model NoVCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 147 | Limit Switch forr suitable for 33KV VCB Model No VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 148 | Spring Charging Motor forsuitable for 33KV VCB Model No VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 149 | Cotter Pin forsuitable for 33KV VCB Model No VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 150 | Connecting Rod forsuitable for 33KV VCB Model No VCB Model No OVB-VBF 36.20.32 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 151 | Mechanical / Spring Mechanism charging system for 132 SF6 Breaker LTB145 DB ABB Make (As per relevant IS/IEC amended upto date) |
| 152 | SF6 Pole suitable complete for 132 SF6 Breaker LTB145 DB ABB Make (As per relevant IS/IEC amended upto date) |
| 153 | Tripping/Closing Coil Assebly complete for 132 SF6 Breaker LTB145 DB ABB Make (As per relevant IS/IEC amended upto date) |
| 154 | Spring Charging Motor complete for 132 SF6 Breaker LTB145 DB ABB Make (As per relevant IS/IEC amended upto date) |
| 155 | Limit Swtch complete for 132 SF6 Breaker LTB145 DB ABB Make (As per relevant IS/IEC amended upto date) |
| 156 | Knife switch for 33 kV ABB, BHEL VCB (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 157 | Crank Housing for 33 kV ABB, BHEL VCB (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 158 | Microprocessor controlled fully automatic portable oil testing machine (Meggar make) (As per relevant IS/IEC amended upto date) |
| 159 | Digital Insulation tester, 1 KV (Make : Meggar, Motwani) (As per relevant IS/IEC amended upto date) |
| 160 | Digital Insulation tester, 5KV (Make : Meggar, Motwani) (As per relevant IS/IEC amended upto date) |
| 161 | HV Tester (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 162 | Shunt Tripping coil / Closing Coil 110V DC, 1A suitable for 33KV VCB of BHEL, ABB, GEC Alstom, Siemens, Mega win, S&S Make or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 163 | 33KV Vacuum Interrupter suitable for 33KV VCB of BHEL, ABB, GEC Alstom, Siemens, Mega win, S&S Make (As per relevant IS/IEC amended upto date) |
| 164 | SF-6 gas Cylinder of 11Kg (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 165 | Thermal overload relay “Siemens Make” of 4A Max with range 0.8-1Amp and 1.5A-1.2A (As per relevant IS/IEC amended upto date) |
| 166 | 0.1 Amps Overload Relay for transformer Cooling fans or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 167 | Trip Circuit Supervision Relay JRV111 110V DC (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 168 | Digital OTI 90-250V AC/DC, range 0-150oC make Precimeasure (As per relevant IS/IEC amended upto date) |
| 169 | OSR for 50 MVA Power Transformers (BHEL, EMCO, ECE) (As per relevant IS/IEC amended upto date) |
| 170 | Bucholz Relay for 50 MVA Power Transformers (BHEL, EMCO, ECE) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 171 | PRV for 50 MVA Power Transformers (BHEL, EMCO, ECE) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 172 | Digital WTI meter make Precimeasure (As per relevant IS/IEC amended upto date) |
| 173 | HRC fuse 2 Amps (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 174 | HRC fuse 4 Amps (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 175 | HRC fuse 6 Amps (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 176 | HRC fuse 10 Amps (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 177 | Indicating Lamp 110V DC, pin type / screw type (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 178 | 110Volt DC Alarm Buzzer suitable for C&R panel (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 179 | Numerical O/C and E/F relay Make : Easun Reyrolle/Areva,Poles : 4 NosVolt : 43- 280V DC,Amp : 1A(As per relevant IS/IEC amended upto date) |
| 180 | 132KV SCADA Compatible Numerical Distance Protection Relay /Differential Relay/REF/Directional OC & EF Relay of make ABB/SIEMENS/GE/MICOM/ALSTOM/SCHNEIDER with IEC 61850 compatibility, including Distance Recorder, Unde Frequency elements,Fault recorder and event recorder,etc for 132 Kv Transmission Line Feeder/ Transformer Panels (As per relevant IS/IEC amended upto date) |
| 181 | 33KV SCADA Compatible Numerical REF/Directional OC & EF Relay of make ABB/SIEMENS/GE/MICOM/ALSTOM/SCHNEIDER with IEC 61850 compatibility, including Distance Recorder, Unde Frequency elements and event recorder,etc for 33 Kv Line Feeder/Transformer Panels (As per relevant IS/IEC amended upto date) |
| 182 | 2 pole heavy duty rotary switch with “OFF” 5Amp make “Key Cee” equivalent etc for C&R panel (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 183 | Auxiliary contactor switch for 33KV VCB of different Makes BHEL, ABB, Siemens, Megawin,. S&S, GEC Alsthom or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 184 | Semaphore indicators for Isolators & earth switches (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 185 | Nuts and Bolts of sorts Hot Dip Galvanised (16mm/35mm/ 40mm/45mm/50mm/65mm/70mm/75mm) heavy duty (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 186 | GI Spring washers of sorts heavy duty as per sample (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 187 | Old cotton saree/Dhoti cloth |
| 188 | 145 kV, 50 c/s, 2500 Amps, 31.5 kA for one second, AC Motor Operated horizontal double break, outdoor type 3 pole isolators with all accessories,clamps, auxiliaries, marshalling boxes, other essentials, complete in all respects as specified in the technical specification without earthing blades (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 189 | 36 kV, 50 c/s, 2500 Amps,25kA for 3 Sec, horizontal double break, outdoor type manual operated 3 pole isolators with all accessories, auxiliaries,clamps, marshalling boxes, other essentials, complete in all respects as specified in the technical specification without earthing blades (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 190 | 145 kV, 50 c/s, 2500 Amps, 31.5 kA for one second, AC Motor Operated horizontal double break, outdoor type 3 pole isolators with all accessories,clamps, auxiliaries, marshalling boxes, other essentials, complete in all respects as specified in the technical specification with earthing blades (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 191 | Grease for mechanical mechanism of circuit breakers (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 192 | Female contacts for 33kV Isolator 2500 Amp or as per the sample (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 193 | DCP type Fire fighting equipment of 10 Kg capacity (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 194 | DCP type Fire fighting equipment of 25Kg capacity (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 195 | ABC type Fire fighting equipment of 5Kg capacity (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 196 | ABC type Fire fighting equipment of 10 Kg capacity (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 197 | 2 Volt, 300AH, 110Volt DC VRLA type cells Make HBL,Exide etc (As per relevant IS/IEC amended upto date) |
| 198 | Welding electrodes SWG 10No as per IS:814 of 2004 (of reputed/standard Make) |
| 199 | LED Lamp 12W ,Holder type (Philips, Havells, Crompton, Bajaj,etc) (As per relevant IS/IEC amended upto date) |
| 200 | Search Light with 300-500Mtr. Focus make Flash, equivalent etc (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 201 | Rubber mat 1mtr x 2mtr, 12mm thick (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 202 | 100A TPN four pole change over switch of HPL/L&T/ABB Make(on load) (As per relevant IS/IEC amended upto date) |
| 203 | 1.1KV Voltage Grade 2.5sqmm 2 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 204 | 1.1KV Voltage Grade 2.5sqmm, 4 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 205 | 1.1KV Voltage Grade 2.5sqmm 6 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 206 | 1.1KV Voltage Grade 2.5sqmm, 8 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 207 | 1.1KV Voltage Grade 2.5sqmm 6 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 208 | 1.1KV Voltage Grade 2.5sqmm 6 core Copper conductor, PVC Insulated control cable conforming to IS: 1554-1998 (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 209 | 1.1KV Voltage Grade 6sqmm 3 core Copper Cable, XLPE Insulated PVC Shethed Armoured Cable (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 210 | Steel wire rope sling 12mm dia ISI Make heavy duty as per sample (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 211 | Red Oxide Enamel Paint (Asian, Nerolac/ Berger) (As per relevant IS/IEC amended upto date) |
| 212 | Aluminium paint (Asian, Nerolac, Berger) |
| 213 | Steel wire rope sling 16mm dia ISI Make heavy duty as per sample (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 214 | Magnetic Core Drill along with 16 mm core bit with following specifications:1. Input Supply Voltage (V) = 220-240 V2. Motor Input = 900 Watts3. Core Cutting Capacity/ Drilling diameter (mm) = 12 to 384. Core Cutting Depth (mm) = 505. Rated Speed (RPM) = 4506. Weight (KG) = 10.5Preferred Brand or Make ( Ralliwolf, Bosch, EIBENSTOCK,BDS Maschinen) or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 215 | 132KV Voltage Grade Portable earthing/ discharge equipment with statie phasing rod & hotline indicators with following specifications :Make : Monrach ,Model : Safety First Standard : IEC-1235 for Dielectric Strength,IEC- 1230 for Mech. and short ckt Strength Length of segmented : 3.4mtr.Fiber glass pole Internal dia ID = 33mm Outer dia OD = 40mmEarthing cable 120mm single core PVC insulated copper conductor cable Length of earthing cable = 10mtr. Hardware accessoriesClamp holder, line and clamp,” earth end “U clamp etc (As per relevant IS/IEC amended upto date) |
| 216 | Hook on meter Likely make Motwani, WACO, Riken etc (As per relevant IS/IEC amended upto date) |
| 217 | Rain coat (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 218 | Gum Boot (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 219 | Dangari (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 220 | Supply of national Standard make tool kit including all the tools and accessories complete in all respects required for carrying out of indoor/outdoor mainenanace etc works in 132/33 kV Grid Substations. Like Taparia/ENCO//Stanely etc (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 221 | Petroleum jelly (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 222 | LED Flood Light 50 Watt (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 223 | 3Phase High Speed heavy duty Industrial exhaust/cooling fan for power transformer with following specifications Make : Crompton Greaves /Orient/Usha Voltage : 415V Frequency : 50Hz Sweep : 600mm (24Inch) Speed : 960 Rpm (As per relevant IS/IEC amended upto date) |
| 224 | Power Transformer oil testing bottle for DGA testing of oil as per the sample provided by the deptt. (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 225 | Refilling of DCP Fire extinguisher (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 226 | Shunt Tripping coil / Closing Coil 110V DC, 1A suitable for 132KV Circuit Breaker of make ABB, Siemens, CGL or equivalent or as per the sample provided by the purchaser. (As per relevant IS/IEC amended upto date) |
| 227 | Detachable Compressor with earthwire, Zebra and Panther Die Sets Each (100 ton) as per the specifications/ sample provided by the purchaser (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 228 | Delongi/Gazal/Aygaz type Gas heaters (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 229 | Pillar heater rotating type 1500W (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 230 | Spades (Ford/Tata/equivalent) (As per relevant IS/IEC amended upto date) |
| 231 | Flexible copper wire 1.5 sqmm with insulation (Havels/Polycab/equivalent) (As per relevant IS/IEC amended upto date) |
| 232 | 185 sqmm 3.5 Core AC cable of Havells/ Polycab/Paramount/Grandley Make (As per relevant IS/IEC amended upto date) |
| 233 | Welding Goggles (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 234 | Terminal Block Connectors (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 235 | Heating Elements for Pillar Heaters (As per sample) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 236 | SF6 Gas Filling Device for ABB/CGL/Siemens 132 KV Breakers (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 237 | 14 inch Blade for iron cutter (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 238 | Flexible copper wire 2.5 sqmm with insulation (Havels/Polycab/equivalent) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 239 | Flexible copper wire 4 sqmm with insulation (Havels/Polycab/equivalent) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 240 | Safety Belt (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 241 | Safety Helmet (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 242 | Safety Gloves for 11kV voltage level (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 243 | Safety Gloves for 33kV voltage level (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 244 | Single Phase 0.5 H.P Motor with suction pipe (5 Mtr) and Delivery Pipe (10 Mtr) of standard Rubber (CGL/Arise/Havells) (As per relevant IS/IEC amended upto date) |
| 245 | Dee-shackles of Grade 63 and shall have safe working load 12.5 Tonnes and shall conform with : IS 6132 (Part II) (ammended upto date) or as per the sample provided by the purchaser |
| 246 | LOG Books as per sample provided by the Division |
| 247 | Welding cable (35sqmm copper) of Standard quality |
| 248 | Dee-shackles of Grade 63 and shall have safe working load 5.0 Tonnes and shall conform with : IS 6132 (Part II) (ammended upto date) or as per the sample provided by the purchaser |
| 249 | Gear Mechanism for 33 KV BHEL VCB of standard make or as per the sample provided by the purchaser |
| 250 | Flexible copper wire 10 sqmm with insulation (Havels/Polycab/equivalent) (As per relevant IS/IEC amended upto date) |
| 251 | 200 Watt LED Flood Light of standard make (Philips/ Havells/Crompton/Bajaj) having IP rating of 65 and power efficiency of 80 and shall be compatable with already installed fixtures of high Mast Lights at various Grid Stations (As per relevant IS/IEC amended upto date) |
| 252 | Angle Holders/ Baton Holders (GM/Havells/Bajaj/Crompton) (As per relevant IS/IEC amended upto date) |
| 253 | Grinder 750 Watt-100 mm Angle Grinder (100mm Wheel base) (Make Bosch) (As per relevant IS/IEC amended upto date) |
| 254 | Iron Cutting Machine Power= 2200 watt and having 14 inch Chop saw machine (Bosch) or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 255 | Ratchet Lever Hoist having lifting capacity of 3 Ton of standard make or As per the sample provided by the purchaser (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 256 | Heating Elements for Pillar Heaters (As per sample) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 257 | Snatch Galvanized Two Sheave pulley size 6” dia pulley on ball bearing/Gun metal bush with swivel hook open type with side locking suitable for use in Transmission Line stringing Likely makes PEE, ZI, Honeywell, Burma etc (As per relevant IS/IEC amended upto date) |
| 258 | Electric Hand Drill Machine with rated input power = 800 watt (Make: Bosch/Hitachi/Black & Decker) etc or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 259 | Heavy Duty Vertical Bench or Stand Drill with drill capacity = 39mm having 2 H.P. Motor (Make: Ralliwolf, Bosch) or equivalent or as per the sample provided by the purchaser (As per relevant IS/IEC amended upto date) |
| 260 | A4 Paper of standard quality of gsm 75 |
| 261 | Cartridge for photocopier machine of make Xerox /Canon Model |
| 262 | Cartridge for HP Laser jet printer Model:MFP 1200w |
| 263 | Refilling of Ink Cartridge for Laser Printer MFP-136W |
| 264 | Refilling of Toner for photocopier machine of make Xerox, Canon Model:IR2002N |
| 265 | HP laserjet printer 1020 series |
| 266 | Supply of remote door beel of Panasonic/Havells/GM |
| 267 | Supply of wood primer (Nerolac/Berger/Asian) |
| 268 | Supply of snowcem waterproof paint.(As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 269 | Supply of exteroir washable distemper (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 270 | Wall mounting Fan (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 271 | Iron Hammer (2kg, 5kg, 10kg) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 272 | Enamel Paint (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 273 | Thinner (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 274 | Plastic water Tank (500/1000 ltr) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 275 | 1HP Single phase Motor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 276 | 1HP Single phase Submersible Motor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 277 | Angle Valve brass 1/2\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 278 | Angle Valve brass 1\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 279 | Angle Valve brass 3/4\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 280 | GI Pipes C Class (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 281 | GI Socket 1/2\\", 1\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 282 | GI Elbow 1/2\\", 1\\" (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 283 | Safety Shoes (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 284 | 25 Sqmm 3.5 Core XLPE Armoured Power cable (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 285 | 25 Sqmm 3.5 Core XLPE Power cable (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 286 | 35 Sqmm 3.5 Core XLPE Armoured Power cable (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 287 | 35 Sqmm 3.5 Core XLPE Power cable (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 288 | Single Tension Fitting (Line Type) suitable for 90KN Discs (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 289 | Earthwire Tension Clamp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 290 | Earthwire Suspension Clamp (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 291 | Vibration Damper suitable for 0.2 ACSR Conductor (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 292 | Tar steel 10mm, 12mm, 16mm, 20mm (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 293 | MS Angle 45mm, 50mm, 55mm, 65mm (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 294 | MS Flat Iron 50mm, 40mm, 25mm (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 295 | MS Channel Iron of sorts (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 296 | Portland cement 43 Grade (50Kgs) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 297 | Wired Key board and mouse (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 298 | Flushing cistern PVC 10 Liter capacity with fittings, accessories and flush pipe (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 299 | 50 Liter 5-Star Geyser (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 300 | White vitreous china wash basin 550x400mm with 15mm dia cp brass single hole basin mixer including all fittings and accessories (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 301 | CCTV Cameras (08MP-12MP) (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 302 | LCD SMART TV (Full HD 43\\") (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 303 | Water Purifier (As per relevant IS/IEC amended upto date and of reputed/standard Make) |
| 304 | Name Plates/ Sign Boards for Different Bays/Panels |
| 305 | Steel Almirah with 5 Shelves of reputed make (24 guage) (Approx Size 7Feet Height) |
| 306 | 1.5 Ton Wall mount Hot and Cold Split AC (Make: Daikin) along with the suitable stabiliser Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
